I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?
View 1 Replies
I just recently got my new Imac and am trying to nail down what my options are for streaming music throughout my apt.
The ideal setup for me would be to have my mac run my music/audio from the bedroom and have airport express stream the audio to a Tivoli model 2 (it only has one aux input) in the living room. If I just use itunes it should be a pretty simple setup, but I have one dilemma.
I listen to a lot of Sirius radio and would like to stream Sirius internet radio to the same speakers. Is this possible with airport xpress?? If not what are some of my other options? If possible I want to avoid buying another receiver and using its fm xmiter, this would probably work fine due to the close proximity to the speakers but not a very ideal set-up.
Any advice/experience anyone has to share would be great, also if there are any issue with airtunes I should know.
Does anyone know if it is ppossible to stream all sound via an airport express and not just music played within iTunes?
View 11 Replies View RelatedIf I purchase an Airport Express for streaming music from iTunes, is it it's own dedicated music receiver in that I can choose different music to play on it than what is playing on another airport or itunes directly? Or do the airport extremes simply only stream what is playing iTunes and not their own stream?
View 13 Replies View RelatedI have a wireless network at home. With a Airport Express in my berdroom will I be able to Stream music from my Macs. Connect my xbox to the wireless network via the ethernet socket connect a printer to be shared by my Macs.
View 19 Replies View RelatedI'm having a hard time deciding what router to buy. I like the extreme router but it's a bit pricy. Im using comcast 12mpbs per second speeds. Would the apple airport express be good enough for streaming videos and movies? There will be three laptop users. At most, two at any given time I think.
Would the express be good enough or do I have to get the extreme to stream video and movies? (YouTube, age of empires gaming, apple tv, netflix)
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I've come home from college for the summer and set up my PC and iMac in my bedroom. However, the wireless signal from the router in the basement (a cisco m10 wireless n router) is very weak and cuts out frequently. I have an Airport Express and was hoping to use it as a wireless repeater/range extender, but can't seem to figure it out. I know there is no "official support" for use as a repeater with non-Apple routers, but is there a way around this? If so, how can I set up my network?
View 1 Replies View RelatedI just purchased my new Airport Extreme (draft-n) and setup was relatively easy when building a simple network. However, after discovering that the Extreme cannot cover the whole house, I've been wanting to use my old Asus WL-530g router as a base and the Extreme to extend the network, or vice versa.
I've tried using the Extreme as the extender to the Asus's network but it gives me this message: "You cannot extend this network"
What can be the problem?
Are there any alternative ways to extend a network?
Can I use the Asus itself to extend the Airport network?
I then whantet to reconnect my Airport Express, witch i use for music in the living room.But i couldent for the life of me find out how to do that, so i thougt, ill just reset the thing, and set it up again.But this is where the problem starts.Every time i try to connect to the Express via the wifi list, the Airport Utility starts up fine, and starts the setup, but then crashes...!It dose this every time, at the same place, when it says "reading previous settings". Im running an iMac with lion 10.7.3 and Airport Utility is version 6.0.
[code]...
I'm having friends stay with me for a few weeks and want to set up the AE to limit the speed of internet available so they don't stream video all day (I have a data cap)
View 2 Replies View RelatedI've changed my airport express name, but iTunes still displays the old airport express name on the Airtunes (Airplay) list. I couldn't find a way to fix it.
View 3 Replies View RelatedJust installed my very first wireless network: Airport Extreme. NOT AIRPORT EXPRESS
Stumbled through the installation, and everything works.
However, in the process the software apparently selected a network name for me; and I would very much like to change that network name. I have crawled through the Network Preferences under System Preferences, but I can't find a way to do this.
i recently bought an Airport Express, and i finally took it out of its box after i purchased my new stereo. I connected the audio cable to the stereo and the airport unit and plugged it into an outlet. I opened up airport utility on my mac, AX appeared and i configured it to "join a wireless network". After completing the remaining steps, i updated it.. and waited for it to restart. Now here's my problem. It comes up with an error telling me it couldn't find the device after restarting. I have Verizon FiOS as my provider.. and I know that airport express has a history of trouble with the Actiontec router. Is there anything i can do with my current equipment to get this thing to work? I do not need to extend the network.. only join to use airtunes and print wirelessly... Also, my Actiontec router and FiOS connection are through my crappy dell pc downstairs, while i am using my 24" iMac upstairs in my bedroom trying to connect this. Should i change my router's settings?
View 10 Replies View RelatedI recently switched routers. I've been able to configure the router to join my wireless network. I know it has joined because the light changes from green to amber when the router reboots. When I was configuring, I checked the Enable Airplay checkbox and gave the Airport Express a name and password. I start up iTunes and there is no Airplay icon in the lower right like there used to be with the old router. What am I missing about enabling Airplay? Is there an Airplay app I'm missing that would allow me to find the Airport Express with Airplay?
Info:
MacBookPro, Mac OS X (10.6.8)
I have an Airport Express which I use to play my iTunes music on my home sound system. But I want it to do more and I can't find any information on the web to find out if it can do what I want it to do. So here goes.
I was hoping that I can buy a NAS drive to use for external storage of my music, and use the built in iTunes server on that NAS drive to act as the bridge between the Apple "Remote" application on my iPhone and my Airport Express. This way I don't need to turn on my computer to play music on my home system, because it's all controlled by my iPhone and the always on NAS driveiTunes server.
Is this possible? Are there any other multimedia devices that can do this?
Older G5, with built in Airport, sees Airport Express to drive printer but iTunes doesn't see remote speakers wired to same AE. Was having occasional drop outs, replaced AE with new; seemed to be OK;then speakers stopped showing up in iTunes
(speakers work when cable plugged into iPhone)
when I try to choose either of my two airport expresses or apple tv in the speaker button - bottom right - in iTunes... the result is that is says " connecting to airport express" and just times out. this has happened over and over today.
View 1 Replies View RelatedI know that if the vista, office itunes were to send straight to the airport express its bitperfect (not that I have lossless music, id just like to keep whatever fidelity i have throughout the chain). But I dont know if had another machine streaming music from the central itunes, out from the 2nd machine to airport express if it still would be bitperfect. I would think it would bc its still a digital signal all the way to the receiver in the living room, but i wanted to make sure.
View 1 Replies View RelatedI have a setup as in the diagram below. Internet Router connected to my Airport Express N which creates a N-class network. Then I have an Time Capsule in another room that extends this network. My iMac is connected to this Time Capsule using Ethernet (WiFi is turned off completely).
iTunes is 10.6.1 (7)
Airport Express and Time Capsule have the latest firmware (v7.6.1)
Internet, sharing and other functions are working fine, just Airplay from the iMac doesn't work anymore to the Airport Express. I've tried lots of solutions, and this just seems to be broken. I've submitted to Apple feedback as well explaining the situation and that this doesn't work. If I add/remove a password or enable/disable airplay on the Express, it does reflect in iTunes. It also shows that the Airplay is locked/unlocked (see image) and also shows it as a visible audio destination.
But when you activate it from iTunes, it doesn't ask for any password (if enabled), but it just displays the "connecting" dialog for about 1 minute and then closes the window without any error and just does nothing. It's like iTunes cannot communicate to the Airport Express, although at the same time I can connect to it's internal configuration (edit) and also connect to the internet, my router's config using a browser, etc. without any problems. Also, if I'm using my iPad and iPhone, I can easily use the Airport Express from those devices, but NOT from the iMac.
Info:
iMac, Mac OS X (10.7.2)
The drop-down menu for my speakers has stopped appearing in my iTunes.
I rebooted the Airport Express and checked the settings. According to the Airport Admin utility it's online.
Not sure what's wrong here. I have two mac's and the speakers aren't showing up on either.
For the record I have been using my Airport Express without any problems for about five months.
I have an old airport express that i want to configure but it cannot be found on airport utility. The AX (airport express) itself flashing green light constantly after reset.
Info:
Mac OS X (10.5.8)
After upgrading to Lion on my Macbook Air, I can't seem to be able to connect to my external speakers through airport express. Somehow I can't get the little icon I used to do, on the bottom right corner of the iTunes window (on the left of genius) to select the speakers. I checked the preferences in vain.
Info:
MacBook Air, Mac OS X (10.7.4), Have airport express installed
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Q1: how can I delay printing? This was possible in OS9.
I have a thermal printer wich permits me to change the ribbon (Black, CMY, CMYK). If I have a mixed type of files to print, I'd put on hold (in the "print" window) the files that requires the unloaded ribbon while waiting for the other to print.
Of course, I can print all the CMYK, wait until it's done then print the B/W ones but I don't find it practical. Or I can also rush to the print center and hope to have the time to suspend manualy the ones that need it.
Q2: Once a printer is created, how can I change the associated ppd? This also was possible with OS9.
Q3: It is possible to change the printer name once it is created?
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS XÂ on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies View Related
