OS X V10.6 Snow Leopard :: Built In Speakers Not Working
May 16, 2012I've just updated my iMac 7.1 to Snow Leopard and now I have no sound and no output or input options on the sound menu.
Info:
iMac, Mac OS X (10.6.3)
I've just updated my iMac 7.1 to Snow Leopard and now I have no sound and no output or input options on the sound menu.
Info:
iMac, Mac OS X (10.6.3)
my mac os x v10.6.8 's camera is not working. I've tried Ichat, Skype and Photobooth. Whenever i open them up, it say 'There is no connected camera'.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a macbook 2,1, the white one. Has anyone else had their regular built in sound just stop working right after upgrading to snow leopard? I can get sound to play through headphones, but once I up plug them the little sound icon in the menu bar will grey out and I will not be able to get sound to play through the internal speakers.
If I go to the Sys Pref > Sound > Output Pane, it will say "The selected device has no output controls" in the Settings for Selected Device section.
I upgraded my girlfriends laptop to Snow Leopard even though she could care less. Now she's all mad cause the sound doesn't work.
My new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
It is possible to use the dictionary in Snow leopard in Microsoft word?
View 4 Replies View RelatedI have an older build of snow leopard and i can't upgrade it to the newer build, it just doesn't find any new updates, I have Mac OS X 10.6 (10A354).
View 4 Replies View RelatedWhich speakers are better, the ones that come built-in on the '09 24" iMac or Logitech X230? I'm not sure what the iMac's speaker stats are, but here are the stats for x230's:
# Total RMS power: 32 W RMS
Satellites: 12 W RMS (6 W x 2)
Subwoofer: 20 W RMS
# Total peak power: 64 W
# Frequency response: 40Hz - 20kHz
# Drivers:
Satellites: (2) 2" drivers per satellite
Subwoofer: 5.25" ported driver
# Speaker dimensions (H x W x D, cm):
Satellites: 20.3 X 6.4 X 7.6
Subwoofer: 22.9 x 15.2 x23.5
# Signal-to-noise ratio: >96dB
Reason I ask is that I have the x230's and they're considered as cheap speakers, so I don't know if I should use them with the iMac or not. The one advantage I see them having over the iMac's is that they have a 20w subwoofer, but I don't know if the satellites are better or not.
built in speakers disabled
Info:PowerBook G4 (17-inch Double Layer SD), Mac OS X (10.7.3), speaker icon is grey
the sound is not playing from my built in speakers, but my slider and keyboard controls both show full volume.
Info:
Mac Pro, Mac OS X (10.7.3)
I have no sound from my built in speakers and no built-in audio device listed in my settings. They worked yesterday!!
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
it cant find built in speakers, What´s the solution?
Info:
MacBook Pro, Mac OS X (10.6)
I am streaming iTunes to another room using an Audioengine AW1 (over usb, not the analog input) and it works fine. Looking at JACK audio, Soundflower or Apple's AudioMIDI utility, I feel I should be able to use one or a combination of these resources to output iTunes to both the AW1 and my desktop's headphone port. Unfortunately, I can't seem to perform both. Well, technically I can in using a "y" audio cable to output from the Mac headphone port to headphones and to the analog-in on the AW1's, but that really doesn't work adequately. The output volumes are considerably lower and tied together. I am looking to figure out how to add a usb audio device as another, and simultaneous output.
View 3 Replies View RelatedI have built-in home speakers and I wanted to know if you have to buy airport express to use airplay. Do you have to have airplay wireless speakers to play music from airplay?
Info:
Airplay Speakers, Other OS
how you can call people from Skype™ with no microphone, but only from speakers? My friend wants to know this, he apparently wants to use some soundboard, and if you call from your speakers, the person you are calling can only hear the soundboard but nothing else like background noise or anything.
He's been bugging me to find this out, lol. He has a MacBook Pro 15" OS X Lion.
Info:
MacBook Air, Mac OS X (10.6.8)
I'm a recent PC to iMac convert and have hooked up my iMac to my TV receiver (DVI to HDMI connector and a Toslink cable to the audio). The issue is as soon as I plug in the audio connector the iMac speakers stop working. I'd like to leave the connector plugged in and still be able to use the iMac speakers. Of course when I play a movie on the TV I'd just mute the iMac speakers.
View 2 Replies View RelatedThe speakers on my Macbook have suddenly stopped working. If you plug headphones in, fine. In the system preferences, 'built in speakers' are no longer an option for audio output. Just 'digital out'. When I try and change the volume of the speakers, the symbol is greyed out, and there's a little "you can't do this" symbol.
I have a Macbook black 2.0ghz with 10.5.8
I can not get my speakers to work.
Info:
Mac Pro, Mac OS X (10.6.8), Headphones work/ext spks do not wor
My just bought a new speaker set that uses 3 jacks-black,green and orange, but there is only one female jack plug on my mac mini.The speakers are Logitech 530. I really wanted better sound than I had. I have no idea what type of sound card the Mini has, but I'm running Snow Leopard?
Info:
Mac mini, Mac OS X (10.6.8), WD 250 GB external HD
"Photoshop CS" and "Acrobat 6.0 Standard" suddenly stopped working in my iMac, apparently after I upgraded it to MacOS 10.6.8 (the latest version of Snow Leopard). Both programs had worked normally until that OS upgrade. I deleted Photoshop CS and tried to re-install it from the original CD, but the installation never proceeds because I get an error message entitled: "Install Adobe Photoshop CS quit unexpectedly". This is the full error message:
Process: LaunchCFMApp [1516]
Path: /Volumes/Adobe(R) Photoshop(R) CS/Adobe(R) Photoshop(R) CS/Install Adobe Photoshop CS.app/Contents/MacOS/Install Adobe Photoshop CS
Identifier: com.MindVision.InstallerVISE
[Code]...
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
Firstly I am sorry if this has been posted before, but I did have a look at the Snow Leopard FAQ & a browse through the current topics. And secondly, I am also sorry if I am not using appropriate computer language to describe certain things. I have a 17 inch Macbook Pro I bought in the middle of last year. Before Snow Leopard. So when Snow Leopard came along I went for the upgrade without looking around at compatibility issues with certain software.
So after the upgrade, my EyeTV didn't work, and neither did my internet (I use the ones with the USB stick). So I couldn't even go online to get my EyeTV update. So in my (brief) panick I re-installed Leopard, which wasn't a great idea I guess, because all of a sudden my HD space went down to 50GB from my 500GB of storage. Now I know I didn't have the full 500GB since I did have some photos, music & videos on board. But surely 50GB remaining is quite ridiculous. I think it probably performed a Time Machine backup for me.
Anyway... that was awhile ago. And I was happy to carry on with what I had. But now I think I would like to try what Snow Leopard has to offer. But with only 18GB of space remaining, I think the best option might be to reformat and start over. What do you guys think? My other option is to try to delete as much as I can spare to make room for Snow Leopard. Sorry if this question is a silly one, but I have done a lot of things with my iPhone & with this Mac without thinking & asking first & I have always regretted it. Thanks for any help or suggestions you all can offer.
I have mac mini (early 2009) running leopard and want to upgrade to snow leopard. I've bought a disk from a local store and when I try to install I get as far as 45 minutes to go when the installer reboots the computer and says it will continue to install after reboot. So it reboots kicks the disk out and reboots back into Leopard. The Apple site says it is probably a bad disk, so I got another one, still does the same. Apple also says it might be the dvd drive, I have no other issues with the drive, it installs the original leopard disks without problem, it reads video dvd's without problem, it verifies the snow disk as perfect.
View 5 Replies View Relatedbeen wondering why I can't use my face time as well as my photobooth in my macbook air mid 2012 model??
Info:
MacBook Air, OS X Mavericks (10.9.5)
My Macbook Pro has been having some problems with the built in webcam recently. It shuts itself off if I tilt the screen while using it (then the laptop tells me that there is no detected camera), and now, for the nth time, is not being recognized by my Macbook at all. I've done the special restart a few times in a row now (the one where you hold down the left Shift-Control-Option and the power button), and it still doesn't work. I went under System Information and the camera wasn't even detected there. What should I do?
View 2 Replies View RelatedI'm currently using the 13 inch Macbook Pro with the latest software. I noticed just today that the built-in microphone that comes with the laptop will not work when I plug in my headphones. However, as soon as I remove them, they resume working.
View 1 Replies View RelatedI was in the middle of a skype video chat when the camera in my macbook just stopped working. I'm not sure how to fix it, or what's wrong with it.
Info:
MacBook
Pro
In-built webcam isn't working properly
Info:MacBookPro
I am having trouble with my mac camera. It is suddenly just not working in any program including ichat, FaceTime, and photo booth. I have no idea what to do.
View 2 Replies View RelatedI have a 15 inch Early 2011 MacBook Pro w 16GB RAM
I upgraded to OS X 10.9.3 about 6 months ago
Yesterday I used head phones all day. I do not usually use headphones.
I closed the lap top over night and this morning the built in speakers are not working. But the headphone work.
I have rebooted several times. The red light in the head phone jack is not lit.
When the head phones are not plugged in the System Preferences Sound panel only shows Digital Out and says it has no output controls.
guys my 24' cinema built-in isight not working with mac mini and os x 10.5.8...any idea?
View 3 Replies View Related