Hardware :: Just Plug An Airport Express Into Ethernet Point - Second Wifi On Home Network
May 19, 2010
Our wireless router (some standard linksys one) is downstairs. Wireless is mostly used down there so need strongest signal. Then it's plugged into an ethernet point, which goes up to the loft in a box, where it feeds into a 16-port switch, then back out to ethernet points in each room of the house. (recently renovated the house and ran Cat-5e everywhere.)Currently I have to connect via the ethernet point in my room with a network cable as I can't pick up the wireless signal. Which sucks a bit, being tied down when on a macbook pro.Could I just plug an Airport Express into the ethernet point in my room and set it up as a second wireless point, which I can use in my room? Or is that not what it's for?
View 3 Replies
ADVERTISEMENT
Sep 1, 2010
I was just checking if I can set the Airport express to receive my Airport Extreme's WiFi network and connect a non-WiFi device to the Airport Express ?
View 2 Replies
View Related
Dec 17, 2010
Can the ethernet port on the the airport express be used to plug in a non wifi piece of equipment. Example I have a wireless router: WiFi to airport express (via ethernet connector) to xbox360.
View 3 Replies
View Related
Apr 17, 2009
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
View 6 Replies
View Related
Apr 19, 2009
I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
View 8 Replies
View Related
Jun 21, 2009
I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
View 5 Replies
View Related
Mar 29, 2010
Airport Express wifi MacBooks and the hard wired ethernet MacMini no simultaneous connection via hub Network consists of Cable Modem; Airport Express (1 ethernet port) 2 x wifi Macbooks; Mac Mini (ethernet )
4 Port ethernet hub connects the network OS X 10.5.8
Configuration
Port 1 on hub cable modem
Port 2 on hub Airport Express (not Airport Base Station)
Port 3 on hub MacMini
Both connect without the other plugged into the hub but not simultaneously The first to connect seems to gain control of the connection
View 2 Replies
View Related
Feb 8, 2010
my friend's got a modem/wifi combo from his internet provider, he wants to stream music to an airport express.
is this possible to have an airport express stream music when the central modem/wifi router is non-apple? how to set this up?
View 1 Replies
View Related
Feb 27, 2009
My current setup is an AirPort express with a PIXMA iP8500, if I grabbed a LaserJet 1020, could I plug a USB hub in the AirPort Express, and network them both at once?
View 1 Replies
View Related
Oct 16, 2010
I've encountered the situation a few times while traveling where you have cable connection but no WiFi. Since I now travel only with iPhone and iPad (no laptop), can I just connect an old AirPort Express A1084 to the router and expect WiFi? If so does the now unused AirPort Express kept the configuration of my home network e.g. name and password?
View 5 Replies
View Related
May 7, 2009
Just about to move to a new place I'm trying to think of the best way to network it with what existing equipment I have. So I will be getting virgin cable installed as my ISP which comes with wireless router although not sure which one. What I basically want to have is a home network with a central storage point for all my music and movies/tv. I currently have the time capsule for backing up my macbook, I lead to believe that this cannot be used to store my music collection which I wanted streamed to other laptop on the same network.
I also have a WD My Book NAS(networked attached storage) drive as well as various other external usb hard drives. I have also just looked at the apple air port express base station which I may purchase. So with all this hardware in mind how would I go about setting up my network effectively so that I can keep everything(music/tv/movies) centrally and be able to access through laptops which I plan to have around the house.
View 4 Replies
View Related
Jul 24, 2009
When you get home at your desk, put your MBP on the table plugging it to an external monitor or not, do you keep it running on WiFi or do you plug in an ethernet cable for your notebook? I am on a 25mbps line in my home and i find that when i plug in the cable my internet connection is more stable, faster and doesn't drop out sometimes. Because, sometimes on Wifi, websites take a little longer to load or it seems to not load at all. While on the ethernet cable everything is just speed of light instant.
I have also noticed that using vmware when i go away from the computer and puts windows to sleep, when i get back, it takes a while for windows to recognize the airport vmware driver and connect back to internet, while with the ethernet cable it is just instant (again). Noticed this while running windows live messenger and the time it takes to connect back. I also noticed that transferring files from my windows vista desktop computer to my macbook was alot faster on ethernet cable than on the wifi connection, even though my router supports 54mbps wifi. So are you guys satisfied with your wifi? Or do you use an ethernet cable for stability? Or am i the only one with minor wifi problems?
View 24 Replies
View Related
Apr 22, 2009
We plug cable from the wall into our router, can I do this with the time capsule (extreme) / air port extreme base station?
View 6 Replies
View Related
Feb 24, 2009
I know this seems like a silly question, but it's just something I want to ensure before I go out and buy an Airport Express.
I can plug in a CAT5e cable from my router into the Airport Express and it should work fine, correct?
Network diagram:
Modem -> Wired Router -> Airport Express
View 3 Replies
View Related
Jan 7, 2010
I am attempting to set up a wireless network with an AirPort Express in order to access the Internet from my iPod touch. My computer is a 2002 PowerBook G4/667 running OS X 10.4.11 (the latest OS it can run), and according to an Apple Store Genus, either the AirPort card or the AirPort antenna is shot, rendering the PowerBook useless as a wireless device. Adding to the pain, my cable modem has only one Ethernet port. Hence, I have purchased a Belkin F5D5050 USB/Ethernet adapter (and installed USBPegasusEthernet 1.0.9 as a kernel extension to make it work).
Which I plan to use to connect the AirPort Express to the computer (via the Ethernet port on the Express and the USB port on the PowerBook). The modem would be connected via Ethernet directly to the PowerBook's sole Ethernet port. Everything I read on the Internet says that I should be able to configure the AirPort Express over Ethernet via AirPort Admin Utility, but the utility doesn't seem to see the Express, even if I directly connect them to each other (one Ethernet port to the other). How I could make my network operational?
View 3 Replies
View Related
Feb 10, 2010
I apparently have a unique situation. My ethernet connection, if that is what it even is, comes out of the wall. No connection, nothing like that, it just goes into the wall, and disappears. They told me on the phone it's a LAN. I have my IP, Subnet, default gateway, and DNS numbers. When I plug the cord into my computer, using the IP4 thing, it works fine. I have to put the numbers in myself, no big deal.
Then I plug my APE in, and go into the utility to try to set it up. I enter all of those numbers. But run into all kinds of problems. Vista has no probs connecting my comp up to the airport, but airport has probs getting onto the net. I have fiddled around for hours trying to enter the numbers differently, but with no luck.
View 1 Replies
View Related
Feb 12, 2012
I've upgraded to Lion and everything's fine apart from one problem: using my iPad to access home shared iTunes content on my mac no longer works when my mac is asleep. That's a change in behaviour from Snow Leopard; I used to be able to sleep my mac and then wake it over wifi using either my iPad or iPhone to access all of my home shared libraries. The mac screen used to light up for ten seconds and then go dark again, but it served me the files.
Lion seems to go into a deeper sleep which it can't be woken from. If I attempt to wake my mac from my iPad within about ten minutes of putting my mac to sleep then home sharing seems to work and lets me use the home share libraries, but if I leave it any longer than that then the mac seems to fall into a coma and can't be woken. The weird thing is that I still see a "shared library" folder on my iPad, but when I click on it nothing happens. I think my Time Capsule is listening for wifi access and issuing the magic packet to the mac, but the mac just ain't listening.
I'm using a Time Capsule in bridge mode from an ADSL modem and I've accepted a TC firmware update last week and I'm on lion 10.7.3. I've tried using Ethernet to connect the mac to the TC (and temporarily disabled the wifi connection) but that still doesn't work. Also, note I'm NOT suffering from the problem that 10.7.3 seems to be giving a few other people - my mac reconnects to my wifi just fine when I wake it up manually. For the record, This was an upgrade, so there's still a tick in "wake on network" in power settings and home sharing on iTunes is still configured the same as it was before.
Info:
iMac 27" i5-760, Mac OS X (10.6.7)
View 14 Replies
View Related
Feb 26, 2012
After a firmware update to airport express should I unplug the unit wait a bit and plug it back in?
View 3 Replies
View Related
Sep 27, 2005
I've recently come back to apple mac's, however before my new G4 ibook, i had a few pc's set up on a network, i've still got them and i want to add my ibook to the network, i've got most of it working, however my laserjet 4M plus which has a print server installed in it, which works perfectly with the pc's doesn't want to work with my new ibook. My ibook is connected via airport to a linksys access point, and that to the router, which in the connected to the laserjet. I can Ping the router and it all seems fine, but getting it to print just isn't happening.
View 2 Replies
View Related
Mar 29, 2008
I have a problem with my Airport Express. I plug it in to the plug and connect the ethernet. When i go to search for the base station on Airport Utility it doesn't show it and it tells me to rescan to see if I can find it but it never does. Any ideas on how to fix ?
View 11 Replies
View Related
Sep 28, 2008
Basically I have a linux machine and I cant get the internet sharing to work either they ping each other however won't let it access the internet so thats a different story but; my dad claimed I could use the airport express as a wireless-to-Ethernet bridge, it's connected to the wireless network however how do I get it to transmit the connection through the Ethernet cable?
View 8 Replies
View Related
Aug 26, 2009
I live in a district where phone lines don't reach, therefore I don't have wire internet: only a 3G modem. Can I use AirPort without a cable? Or could I plug in the USB 3G modem into it instead?
View 2 Replies
View Related
Nov 28, 2009
i know that it is possible to connect a HD to the AE by the usb port but now that manufacturers are offering more and more external HD with ethernet is it possible to connect them to the Airport Express or do i really have to spend more to get the Extreme?
View 9 Replies
View Related
Mar 26, 2010
I'm planning to buy an AirPort Express. But I have a question. Can I stream my music wireless from iTunes on my Macbook, without connecting the AirPort Express to an Ethernet cable?
View 3 Replies
View Related
Apr 25, 2010
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
View 1 Replies
View Related
Nov 8, 2010
I recently found out that the Ethernet ports on the Airport Express Units are 100 MBits only. With a Time Capsule I am able to get 15-18 MB / sec via the WiFi, but the Airport Express, even though it has the same Air-capabilities, is limited to around 11 MB / sec through its Ethernet port. I hope they will get upgraded with Gigabit soon, I will replace all in my household. Is there any info on when it might happen?
View 4 Replies
View Related
Jan 18, 2009
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
View 3 Replies
View Related
Jan 26, 2009
is it possible to run both a wireless connection with airport express, as well as have a direct ethernet connection to the computer? i have a simple, two-way ethernet splitter than comes from the port in the wall that should technically be able to do this, but i have tried this without success and i am guessing there is a little more to this problem than just having both connections hooked up at the same time.
anyways right now i am running on an airport express wireless connection. at my school there is a campus-based p2p program that can only be accessed through direct ethernet connection, leaving me inaccessible to it when i am on my wireless connection. there is a bunch of registration junk that has to be done when i switch from ethernet to wireless, which is why i would prefer to have both set up at once.
View 3 Replies
View Related
Jul 24, 2010
I just got an airport express. airtunes works fine, but for some reason I cant get it to create a wireless network when i plug in the ethernet cable, it just tells me the Ethernet is Unplugged. The cable works, as I am using it to connect now.
The setup is :
Cable Modem - MSI RG60SE Wireless Router - Ethernet Cable to my room
View 4 Replies
View Related
Jun 17, 2012
I have my imac connected to lan via ethernet. I want to use airdrop but need to have my wifi enabled. Can i use both ethernet and wifi on the same network. I want to use etehrnet connection as its a 1 gigabyte connection and router is in another room well away from my imac and therefore not interested in using wifi for my connection only for airdop.
View 1 Replies
View Related
