Hardware :: Printer Sharing Using Airport Express And Extreme?
Mar 3, 2010
i'm using an airport extreme as my primary router for internet and everything, and i have a airport express set up in my bedroom for wireless music. i've set it up that the express is joined with the extreme so internet (from the lounge room) and music (in my bedroom) all run through one network.
i just purchased a printer which i plugged into my airport express to enable wireless sharing, and in airport utility it shows the express is connected to the printer, but while im connected to the extreme it wont let me print to it, however it'll still let me stream music to it. And to make is very frustrating because the networks are joined, it wont even let me connect to just the express to do the occasional printing that i want.
After a surge fried my beloved HP LaserJet 1320, I purchased an HP LaserJet P2055dn. This has a built-in print server, to my understanding, with an Ethernet port that would be available for me to connect to a router. I would ideally like to share this printer between my MacBook and another computer (an HP notebook PC running Vista). What's the best idea here? Please bear in mind one thing: the HP notebook has flaky wireless, so it might have to use an Ethernet cable at some point--thus I'd like to explore all of the feasible options.
1. USB to my computer and set up printer sharing? 2. Ethernet to my computer and set up printer sharing? (Does that make any sense? Maybe not!) 3. Get a wired router and, while the computer is on my desk, connect it to the printer and to the connected computers. 4. Get an AirPort Express and connect the printer up to the USB port. Now, we're using WPA2 on our wireless network here, and I thought I read somewhere that one cannot extend a wireless network that's WPA2. Can I hook up a printer to an Express that's a client? 5. One idea that especially intrigued me: Get an AirPort Express and connect the printer up to the Ethernet port, then set up network printing on all connected computers, rather than Bonjour printing. Again, network-extending question still applies--I'm really clueless here.
Since I *have* a network printer, would network printing (i.e., option 5) be faster/better/more efficient than Bonjour printing? Less software or drivers to install? or more?
I want to buy an Airport Express to connect to my university's wired network so I can have a wireless connection, use my speakers wirelessly, and print wirelessly. However, as far as I can tell, there is no way to password-protect the printer sharing feature, meaning that my printer would be free to take print jobs from anyone on my building's network. Can anyone confirm this or set me straight?
I am attempting to connect my Dell AIO Photo 926 printer to my wireless network (WPA2). I use an old Apple AirPort Extreme (hereinafter "AAE") as my router (it's the old "dome shaped" one). I believe that heoretically I could plug the printer into the USB port on the back of the AAE and any computer connected to that network can print to the Dell printer. I have installed the drivers for the Dell AIO Printer and it prints fine when connected to my laptop (Windows 7). However, I am having NO luck doing this when I go to Control Panel and run the "add a printer wizard." Is there anyone who might be able to point me in the right direction to a tutorial or something? Is what I'm trying to do even possible with an AAE and an "older" Dell printer?
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
I have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used. Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I need to be able to plug in an ojo internet video phone into my existing system. Problem is there's not an ethernet wired out connection on the airport express. Can I buy a router and hook it directly to my cable modem, then hook my airport express into that wired router or will that cause issues for my airport express?
I use both an Extreme for its dual band capabilities, as well as an Express to make use of AirTunes. I've recently moved into an apartment that has caused me to have to rearrange how certain things are set up. Before I had the cable modem plugged into my Extreme, but due to where everything is now it would be more practical for it to be plugged into the Express. Does this matter? Will I be able to use the extra features of the Extreme if it is just the 'extra' router on the network? Or does the modem need to be plugged into the 'main' (Extreme) router?
Just wondering if this will work. I have a non-dual band "n" AEBS that does EITHER 2.4 or 5.0 GHz. I'd like to set the AEBS to 5.0 GHz and have my 3 AX connect to it for use with Airtunes. So far, no problem. However, can I setup a fourth AX to host for a 2.4 GHz network and allow my iPhone to connect to it and in turn control a laptop that is connected wireless to the 5.0 GHz network. I think I'd have to setup 2 different subnets, but am not sure if the devices would then be able to see each other? I was going to buy the latest dual band AEBS, but I've been reading about many problems with the 5.0 GHz range.
Is anyone using an ap extreme to extend their network using express as a relay [wds] to and extreme. If so how is is working out for you. I am thinking about getting a new express I have the 1gen express and having issues using it to the new extreme, but before I plunk down the $$$$$ I'd like to get some feedback.
I have a PM G5, MBP and iPhone all sharing off an Airport Express. It's worked fine since I bought it a few years ago.Yesterday I opened up the G5 and blew all the dust out. I've done this several times before, without problems.I also zapped the PRAM and reset the SMU.Anyways, so I started up and all is well. Things are going smoothly. I open up a Safari window and the page doesn't load, or takes several minutes to load. Pages still load up quickly on my MBP and iPhone. It's not just the internet that is sluggish. It's very slow moving trying to access files from the G5 over the network on the MBP.Anyways, I've repaired the permission, reset the the Airport Extreme card and I'm now out of ideas on what to try next.
I currently have an Airport Extreme as my router. I would like to be able to wirelessly play music over my stereo, and therefore would like to purchase an Airport Express to achieve this functionality. If I were to add the AP Express to the network, would it act just as an access point and therefore I could play music wirelessly from my network? Or would it want to create a second network SSID and therefore I would have to switch between networks to play music etc?
So I have recently set up (and eventually got working!!) an Extreme paired with three Airport Express units as well as an Apple TV (latest Generation). Only problem I have is that in one of my rooms (the one furthest away from the Extreme) the Express is struggling a bit and on Air Tunes the signal drops out quite frequently when playing music. So I am considering adding another "wired" Extreme upstairs to this room to cover that end of the house. In addition I was thinking of putting another Express in my sons room - to also cover the garden.
My question is - is there a limit to the number of units you can have talking to one another _ I think they are working in WDS configuration (the wizard took care of it eventually so I don't know for sure) - and I am sure i read somewhere that you can only have 5 devices running in a WDS network? Would the Apple TV be classed as a device or is that simply a wireless client?
I already have an airport extreme to go along with my new alum macbook. But my wife's pc laptop and my iphone are only G wireless and not N so when they are in use it slows the network way down. If I bought an airport express could I link them together on the same network (to share printer and HD on the extreme) and have one handle the N traffic and one handle the G traffic?
I have the airport extreme (newest version) and using the airport express. I have the airport express extending the network from the airport extreme base station. So if I am using the speaker output on my express, will my connection drop from the dual band router, using the express for internet? Both are next to each other too. I only have the express connected so I can use the external speakers.
I'm planning a simple setup: Mac 21.5, email, printer, some music. My internet comes through modem and Ethernet cable. To unclutter my table, I want everything to go through Airport. But which one will do the job?
I am trying to set up a file sharing network between two macs at my home using an Airport Express. I have successfully made a connection and even password protected the connection, but I noticed that the transfer rates are extremely slow (60kbs). I think that the problem is that when I am sharing, the data is traveling from Macbook Pro to Airport Express to craptacular roadrunner internet back to Airport Express and finally to iMac.
I am trying to move files between one Mac and another wirelessly. They are both connected wirelessly to the Internet with an Airport Extreme Base Station (newest version).
It seems to me that the files are transferring slowly, as if they are transferring at Internet connection speeds rather than computer to computer speeds.
The way I am connecting them is by clicking on the other Mac's name from the Finder and then connecting to it. I have file sharing turned on on both computers. I then am dragging the files from a local folder to a folder on the other Mac.
The computer I'm using is a 13" MBP with wireless N, and the other computer is a 17" iMac Intel Core 2 Duo, which I believe has a slower wifi version (maybe g), which I could upgrade to N if I pay Apple $1.99 (I never did, but I remember reading about that a long time ago). Anyhow, even with the slower connection, I still should be getting faster speeds I believe.
Right now, I am trying to transfer a folder with 209 GB of files and the estimated time to complete was at first 45 hours and varied a lot until it stabilized at 30 hours. I canceled the copy until I can find if there's a way to make a faster connection?
I may end up just going about this a different way as I realize there would be faster ways, but I'm curious for future reference, as well�is there a way to tell the computer to route the data through the router rather than the Internet, or is that what it was already doing?
I have a cable internet connection. My modem is in our garage on the ground floor (and cannot be moved). I have been using an Airport extreme installed at my office on the first floor (needed it there to connect a printer and a hard disk to share across the network). The Airport Extreme was connected to the modem via a CPL unit. Last month, my internet connection was upgraded to 30MB. When testing the actual connection on my computers I got a slower connection. I isolated the problem to the CPL unit. When connecting my base station directly to the modem, i enjoyed the full speed on the wireless connection.
To remove the CPL, I bought yesterday an Airport Express. I set it up as an extension to my Extreme's wireless network (the Extreme now moved downstairs to the garage), and connected it in my office to the printer. Upstairs with my iMac the result is perfect and I still have my full connection. Downstairs with my macbook however the connection is now much than it was before. Is it possible that the Express is actually slowing down the wireless connection in certain parts of my house. What would be the optimal setup between the units in my case?
I'm having a hard time deciding what router to buy. I like the extreme router but it's a bit pricy. Im using comcast 12mpbs per second speeds. Would the apple airport express be good enough for streaming videos and movies? There will be three laptop users. At most, two at any given time I think.
Would the express be good enough or do I have to get the extreme to stream video and movies? (YouTube, age of empires gaming, apple tv, netflix)
Setup main airport extreme with one laptop wireless N and another with the lower grade plus 3gen touchs. Could I set up the express to send out the N/B/G WiFi while the extreme sends out only N wifi?
I'm in the market for a new Express or Extreme. I know Apple just announced an event for next week focusing on Macs. Is there any features that either of these are lacking making them candidates to be updated?
setting up my xbox 360 with a xbox-live connection. I am planning on relaying my base station's internet connection to my express. Then connecting my express to my xbox via ethernet. if someone could inform me on the settings, for the xbox, extreme base station, and express.
I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
Can the new Time Capsule be used as a stand alone router or do I have to connect it to my existing Sky router? I believe people on here call it bridging.
Can I use Airport express with it to extend my network or will I still need the Extreme?
