I already have a wireless network in my house. I'm about to buy a printer, but would prefer to keep the printer in a different room. Can I connect the printer to one of those AirPort Express Base Station, then print wirelessly from my laptop?
View 4 RepliesCan I assume that AirPort Express Base Station is basically a mini wireless router less the ability to connect to computers using wired connection?
View 3 Replies View RelatedI have had my Airport Express Base Station for almost 4 years and last week it just stopped working. No Green/Orange LED, no network, not able to reset, dead as a doornail. It broke before I could reset or reformat it. Now I have no wifi at the house and I decided to sell the unit on Ebay. I have had an overwelhming response to my broken unit and am a little concerned. Do they know something I don't? Since I did not get to reformat it, I am selling a unit that is still as is. Does this have data on it that can be hacked or should my home Macbook be at risk? I have deleted my home network from my Airport Utility on my Macbook, but not sure what else I can do. I really would like to make some money off it, but not if I am at risk of someone using data stored on the device I cannot wipe off because it is broken. I know my network would still be stored on it and network password.
View 2 Replies View RelatedI have recently purchased a 15.4 MacBook Pro 1.83GHZ 2MB Ram with Intel Core Duo. The machine has a Airport Express Card fitted and I have purchased a 802.11n base station but I can't get it to work! The Base Station light just flashes amber and will not go green. I am simply trying to play my speakers through it wirelessly. The MacBook does not recognise the base station when I scan for Apple Devices.
View 3 Replies View RelatedIs there any way to connect an Airport Express base station to a wired network requiring authentication?
I'm using the university network which requires a user name and a password and bought an AE to set up a private wifi network for my mac, ipod touch and printer, without considering this.
I've tried a few things but haven't found anything useful. I guess sharing the connection via my mac's Airport would be possible, but how do I set up the AE to extend the mac's wireless network while it's connected to it? It can't be done from an ipod touch, can it?
I've upgraded two Macs (a Mac Mini and a MacBook Pro) to Leopard, and both have lost the ability to print to the Epson CX5000 connected to my AirPort Express base station. The Mac Mini, which is also connected via Ethernet to my home network, can print to the CX5000 as a Bonjour printer connected to the base station. Both computers think they're printing. They both get a connection to the printer, and act as if the printer is printing the jobs, but no print job is forthcoming.
View 1 Replies View RelatedI have a network of 4 macpros, 6macbook pros, 2 imacs & 7 windows machines running xp, and a laptop running vista business. I recently purchased an airport express base station to put my usb printer (Epson Stylus photo 1390)on the network. All macbook pros & imacs are printing efficiently on wireless. Macpros are using the printer shared from one imac. But i don't understand how do i connect my windows pcs to the printer (all are on ethernet lan). Is there a way to connect them.
View 7 Replies View Relatedso i just got the Airport Express Base Station so i can connect my WD external HD (i don't like to plug it directly into my laptop...) i also moved my iphoto library file to the external HD. why is iPhoto so slow to start up and do pretty much anything? i thought in this way i could save my internal SSD from clutter, but accessing the iphoto library from the external is driving me mad with its slowness.
View 7 Replies View RelatedI have a specific problem that I have tried to research and correct, but still no solutions. Here it is:
I currently have a wireless setup in my house using the IMac as a base station. I have this setup through the "Sharing" tab in System Preferences. I have an ITouch that I then connect to this network and surf the web downstairs, etc. It works great!
I purchased a new Airport Express that I want to plug in downstairs next to the stereo and then use Airtunes to play music over the stereo downstairs. This Airport Express would connect wirelessly to the IMac base station, just like the ITouch does. I also need to still be use the Itouch with this configuration.
Connecting a router to Airport Extreme: Will it slow down the internet access to all the computers more? I wanna hook up my Mac Pro, iMac via Ethernet and my PowerBook will be wireless. Is it gonna effect my speed?
View 12 Replies View RelatedSetting up my mom's eMac to the internet via an airport base station. The main computer that is hooked up to the cable modem is my new iMac. Does anyone know the settings I need to input or where I would find them? I'm at a loss for what to do because usually it all works when initially connecting.
View 3 Replies View RelatedI currently have Qwest DSL and have the 2wire 2700 hg modem. I have attached the picture of it. I currently have a Windows XP computer that is now a 2 1/2 year old computer (blah it was a hand me down). The Windows XP PC is currently hard-wired to the modem. I now have the 802.11n version of the AEBS. This is going to be used for my current Macbook. I have an office downstairs so I will be doing wirelessly. I want to use the 802.11n only option with my Macbook. Also another reason I want to disable the 2wire built in wireless feature and have it replaced by the AEBS is because Qwest is not doing anymore firmware upgrades for the 2wire 2700HG modem. By the way, my family sometimes visit and use 802.11g only on the devices they use. I know AEBS supports that. I just hope 2wire wireless feature can be disabled without no issues. These are the things I am wondering:
1. Has anybody run a similar setup to mine? Any things I should consider? Any pros or cons?
2. Should I turn off the 2wire modem firewall and turn on the firewall option on the Airport Extreme base station or vice versa?
3. Should I leave alone the NAT feature on the modem be left alone?
4. Does this kind of setup have to be run in "bridged" mode?
That's all the questions I have for now. I hope someone can help with this. I looked and looked for a similar question to these questions but could not find a recent forum post to mine.
So here is my deal. I have an airport express base station which i use as my router. It works just fine when i have it as my wireless router for my macbook and my pc when i have it locked using a WPA password. When i have it locked though it will not work with my xbox 360 and linksys wireless gaming adapter [URL:..] which i have. When i unlock the WPA and leave the airport express unlocked it will work with my macbook and my xbox 360, but it then wont work with my pc. I do not personally care about the pc, but my wife does. I also would like to have it locked and WORK with all three devices. Anyone have any suggestions for this lost soul?
View 3 Replies View RelatedI picked up a Time Capsule 500GB and an AirPort Express 802.11n today. I am trying to setup my network as follows.
Time Capsule as base station
AirPort Express as as range extender
I would also like to set up the AirPort Express to use it's ethernet port to provide internet for my DirecTV HR20 HD DVR. I've currently got everything connected and running, and the HR20 gets an IP address, however, it says that there is no internet connection.
I am unable to add aan HP Laserjet 1212nf printer connected to an Airport Base station. When I click add it takes me directly to the I.P. window. My MacBook pro running 10.6 does not see the printer, Bonjour does not search for it.
Info:
MacBook Pro, Mac OS X (10.6.8)
Anyway, at my school, I tend to not have any problems getting on the wireless, except there is one place where I can get a connection to the wireless access point, but it will not give me an IP address. I tried release and renew on many occasions. I also tried restarting and all the regular stuff. My school's tech support was not too helpful.
I spoke to some people who have had similar issues and they said, that they have had it with some routers and not other. Because of the nature of the network, there are a lot of base stations all broadcasting with the same SSID. They suggested I try to connect to one of them.
The problem is, by default, OS X connects the station with a given SSID that has the strongest signal. Is there a way to connect to the other ones. Using a widget, I see the other base stations with the same SSID. How do I tell my computer to connect to those?
For what it is worth, I have a 2.2ghz Intel Core 2 Duo Macbook with 2 gigs of Ram and all the latest versions of everything.
With the internet sharing feature, can't I just hook one of my computers up directly to a cable modem and share the internet in system preferences?
View 7 Replies View RelatedAirPort Utility 5.5.1 includes general bug fixes and addresses the following issues:
Not importing all settings when importing a configuration. Not propagating MAC address control lists when using an extended network.
I've been looking here for the answer without any success. Well after 8 yrs I decided upgrading my linksys's router and I was able to setup my new airport extreme wireless and add my ethernet printer without using the USB option.
I noticed after using my daughter macbook pro under her log in and I was able to see my airport router and was able to change settings under airport utility.
I don't want that to happen as I want to manage everything from my Macpro and I'n afraid that anyone with another pc from outside can have access to it.
I don't have any share files except sharing the printer in the network.
Also I noticed that I can't have two seperate network name's with individual passwords for 2.4 GHz and 5GHz but I have a separete one for the guest network which I did okay.
If I add a hard drive in the airport router via USB can I use that for time machine for my daughter macbook pro?
It's a two year old 802.11a/b/g Airport Extreme Base Station.
I've tried connection via wireless and ethernet from two different Macs (one with an 802.11a/b/g Airport Extreme card and one with an 802.11a/b/g/n AE card.) I can ping the base station successfully, but I can't connect to it with Airport Utility.
i was at the flea market today, and found an apple base station, in the box, covered by the original plastic cover.. never been in use! on the box it says "apple 1999", how old is this device?
I found a nice and short video of the product on youtube: (URL)
so here is my question, will it be useful? i got router, and i got the airport extreme, we planing to extend the house soon, can it be used as another network for the house?(which means 3 networks)
I have just bought a AEBS and all works on a 2.4Ghz network. I think I have set it up correctly. I can see my wireless network with 5Ghz in brackets in my Airport menu but I can't connect to it, just times out. I have read this seems to be a firmware issue for the AEBS on 7.5
I can't see in Airport Utility to set the Radio mode to 'N' only, I only have 2 options as shown in the attached.
I have an airport extreme base station and I heard you need a modem to connect it to, I have a bt homehub and need to just get the internet setup. I can't seem to set it up how hard I try. It shows this when I try to plug it in without the bt hub [URL] and I dont know if I have a modem or not?
View 1 Replies View RelatedJust bought an Airport Extreme from Apple. Is there anyway I can use it instead of my existing netopia router.
I'm getting mixed reports on whether I can do it. The AEBS appears to be able to take a dsl line.
I want to get an iMac and an AirPort Extreme Base Station. I already have a 2WIRE wireless router using 802.11b/g. Do I need to get the AEBS, or will an iMac work with my existing router? And I need to keep my 2WIRE router, so how would I hook up an AEBS to the 2WIRE router? I've heard that you have to set the AEBS to 'bridge' mode or something. Can you also give detailed instructions on how to set up the AEBS with the 2WIRE router?
View 3 Replies View RelatedSince it doesn't support WPA encryption, its more or less useless to me. I pulled out the Airport card (its a snow model), but now i'm left wondering what to do with the rest of it. The enclosure is so cool looking, I would feel bad to just throw it away.
View 1 Replies View RelatedEvery time I play Xbox Live, it tells me that my NAT setting is not open and that Matchmaking may be slow. So my question is this, how do I open up my NAT? I went to Airport Utility>Internet>NAT tab>and unchecked both "Enable default host at:", and "Enable NAT port mapping protocol", but it still says that my NAT is Strict. So what to do?
View 5 Replies View RelatedJust bought an Airport Extreme from Apple. Is there anyway I can use it instead of my existing netopia router.
I'm getting mixed reports on whether I can do it. The AEBS appears to be able to take a dsl line.
I usually got 130mbps with my n-router in terms of speed from my iMac to my router, but now for some reason I am only getting 13mbps.
I have changed my multicast rate from 2 - 11 mbps and no change. Any ideas on what could have done this?
In the next few days my setup will include an iMac that is n compatible, two apple tv's and two iphones. I also have a powerbook that won't use 'n', however this will be of nominal use.
I want to set it up where it's as fast as possible - especially for the apple tv's, but thinking the iphone will slow it down. Is this the case?
