I updated my PSP which now has a web browser. But I cant connect to my Aiport! I have a Password for the base station and I'm not disabling it. When I set up my PSP network it sees my airport signal and then asks for the WEP key. It's 10 digits and I tried entering the letters in in caps and lowercase. When I finish the setup and test the connection it says connection error.
View 24 RepliesI just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View Relatedwhat is the connection for the airport extreme? is it pci? also i know i plugged an antenna in the airport card. is the antenna free on the other end?
View 2 Replies View RelatedI cant get on my network as it keeps saying password failed etc. 3 iphones and 2 ATV's and the ipad are connecting with no problems at all.
I was able to link to my neighbors wifi that has no password though And. it's a 1 month old MacBook Pro 13" and a pre 09' White Macbook
AND the iMac in the bedroom is working on my wifi fine as well.
what is the connection for the airport extreme?
View 9 Replies View RelatedIs it possible to use Airport Extreme without a modem or internet connection? I used to have internet in my house but no longer need it. I would still like to be able to wirelessly access my printer and external hard drive. Any ideas?
View 4 Replies View RelatedI just got an airport extreme card and installed it in my Power Mac G5 which is running leopard.
Im trying to connect to my Linksys router downstairs which is password protected. The airport sees the wireless network but when I try and connect and insert the password i get a 'connection timeout' message.
I tried to use the assistant also but when it come to inserting the password its says the password is incorrect even though it definitly is correct..
Im relatively new to Mac so please excuse the lack of knowledge.
For the last 3 years I have used a Speed Touch 330 USB Broadband modem supplied by my provider Pipex
Initially only one computer was served - Mac Mini
Since then the following computers have now arrived
2 Powerbooks
1 Ibook
1 Imac
There is now a requirement for wireless connection to the internet
I have acquired an Airport Extreme Wireless Base Station
This has a single WAN port for modem connection
Can the above modem be successfully be connected by some means
my airport extreme connection to internet keeps failing. It is occurring about every 3-4 days, where I get amber light. By unplugging it resets again. Is there something I can do, or do I need to by a new system. It is about 2 years old.
View 5 Replies View RelatedI have just recently started having this problem. It seems when the computer sits idle, the connection drops. I don't see my network in the dropdown menu. I open airport utility, and the extreme base station does not show up. I find I have to unplug it, or do an actual reset on it to get it to show up.
I try resetting the cable modem as well, but I have never had issue with the internet connection itself here before. I try restarting the computer. When it does come back online/show up in AIrport Utility, it seems kind of random because it will take a few attempts at all 3 methods mentioned before it just suddenly appears in Airport Utility. So I really have no idea what is helping. The process is a pain in the butt though.
I have searched around, but I can't find many current articles on the problem.
The only other info I can offer is that I never had any problems until I installed the last Airport Utility update. I am running 10.5.6. The problem doesn't seem to happen while I am working, and online frequently.
I don't even know where to start trouble shooting.
I'm using WPA encryption on my Airport Extreme via a Linksys WRT54G. Everything works great, except when my Powerbook wakes up from sleeping, the connection is lost, and doesn't reconnect. To re-establish the connection, I have to select "Turn Airport Off" and then "Turn Airport On" from the Airport extra, then select my network from the menu. It doesn't seem to be a question of forgetting the key, because it doesn't ask me for the key again when I do this.
So, (a) has anyone seen this behavior and (b) is there any known fix? I saw a couple other posts in a Google search referring to this behavior, but they were older posts, and didn't have any answers.
This is on OS X 10.3.3 BTW with all the most recent updates.
I have a 3 month old Airport Extreme Base Station(dual band) running a secured 2.4 and 5GHz network.
It is dropping it's wireless internet(not signal, just internet) on my 13" Unibody MBP at least 2 or 3 times per day. Not at a certain time, or under certain circumstances, and I can't replicate it. My computer will continue to see the networks(named airFORBUSH and airFORBUSH(5GHz)), but there will be no internet, and it won't stay connected to them. If I connect to the network named "FORBUSH", which is our Linksys network, it connects and is up and running again, so I know it's not our ISP.
Here's my setup in my house(I'm the only one having this issue, since I'm the only one running wireless on the AEBS
I just got a 2010 Airport Extreme to replace my February 2009 model. The 2010 model does not seem to work with my cable modem. It is not faulty because I have already tried two different ones. My MacBook will recognize and I will get a green light, but no internet connection. When I connect my 2009 model Airport Extreme I do get internet connection.
View 5 Replies View RelatedIimac uses airport extreme. For no known reason stopped connection to Internet. Reset. Still no connection with saying cannot connect because it timed out. When I connect extreme directly to the iMac I can get Internet. If I disconnect Internet does not work
Info:
iMac, Mac OS X (10.7.4)
Can anyone provide clear instructions on connecting a 2Tb Lacie hard drive to the Airport Extreme via one of the ethernet ports? The HD does not support a USB connection and I already have another HD connected to the Airport Extreme via the USB port. I am also working off of a PC laptop.
View 7 Replies View RelatedWe're running an airport extreme as our router. About once every day or every other day, the internet connection drops, but the router is still functioning fine (can connect to the router) and is visible via airport utility. We can't connect to the internet, whether via a wired or wireless connection. In order to get the internet back up, I need to so a restart on the airport utility. This seems odd, but this is the second airport extreme in a row that we've bought that has this problem (the other one lasted two months).
View 6 Replies View RelatedI am having since few weeks problem with my iMac loosing connection with my wifi airport extreme, my MacBook pro, iPhone and iPad is staying looked perfect with my wifi..I Mac is loosing connection, no indication anymore on my top window on my desktop. I need to go to system preferenties, open network and selecting again my wifi network..All fine for certain period of time ( 15 minutes) and i need to do THE Same thing..As all THE rest is werking fine, is this setting Or hardware problem in my iMac
Info:
iMac, Mac OS X (10.7)
I have a set top box that has a router attached to it (Siemans Gigaset SE587), this in then attached to my Airport Extreme.
After some minutes i lose connection. I have tried changing Channels which allows me go back on line again, but i think its more a case of it working after every time i restart my Airport. and have even reset the Airport Extreme to create a new network.
The loss of connection has nothing to do with my isp because I am currently directly linked into my mac using the ethernet into my mac . And no connection drop.
Does anyone have a clue what this might be. I am sure my Airport is in good working order, I say that because it was working fine before my isp change.
And when it is able to stay up its working very well.
So around last week my airport has been giving me some problems first of all it allows me to connect to my airdisk for about 30 min, then after 30 min when I click it to use I get this error (Connection Failed)(The server �Airport� may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.)
Im really confused it always worked without a problem and now I get this the way to fix it is to restart my airport but then after like 30 min I get the same error.. Its also impossible to do time machine backups as well unless I restart the router a bunch of time.
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedThis might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
I recently purchased (as in days ago) a refurbished 13" Macbook Pro. I just noticed today that my wireless connection on my Macbook Pro has been losing it's connection about every other 2-3 minutes. I was on iChat with a buddy this morning, and I must have been disconnected and then reconnected about 8 times in 20 minutes. I first thought it must have been a problem with iChat. That said, I have sat here looking at my screen for the past ten minutes, and I have seen the Airport wireless indicator disconnect and then reconnect again at least three times in the past ten minutes.
I have AT&T U-Verse Service, and I am forced to use their provided 2WIRE router. That said, I have had no problems with any other device that uses the wireless connection, from my iPhone to my PS3. I work from home and have my HP laptop literally sitting right next to my Macbook, and it has not disconnected once from the same wireless connection, whereas my Macbook has literally disconnected at least 20 times.
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
