Hardware :: Running Ethernet Cable From XBOX 360 To Airport Express
Aug 25, 2008
I have been searching around the forum for this answer and I haven't found anything specific. Here is my network setup.
Bedroom:
Modem --ethernet-- Airport Extreme --ethernet-- iMac
Living Room:
Airport Express (Wirelessly Connected to Airport Extreme) currently setup for AirTunes using a bridged connection.
What I want to know are the specifics of running an ethernet cable from my XBOX 360 to the Airport EXPRESS and using that as my internet hook up to get on Xbox Live.
View 8 Replies
ADVERTISEMENT
Aug 26, 2009
I live in a district where phone lines don't reach, therefore I don't have wire internet: only a 3G modem. Can I use AirPort without a cable? Or could I plug in the USB 3G modem into it instead?
View 2 Replies
View Related
Mar 26, 2010
I'm planning to buy an AirPort Express. But I have a question. Can I stream my music wireless from iTunes on my Macbook, without connecting the AirPort Express to an Ethernet cable?
View 3 Replies
View Related
Mar 13, 2010
I have an Xbox 360 set up in my bedroom which is at the opposite end of the house. I have an airport extreme base station (new model) connected to my modem and PC (PC is not wireless, thus why i have it connected).... I have the wireless adapter connected to my xbox 360. I can play online with no lag (game: modern warfare 2) when nobody is on the pc but when someone is on the pc I get very noticeable lag. I guess I am fighting to split the connection with the pc. What is my best solution? 1) Have my ISP boost the speed of my modem. I didn't know if this would help by giving us more speed to fight over. 2) Get an Airport express and set it up closer to my bedroom/xbox 360. Will the express still fight for the connection with my pc like my wireless adapter on the 360? 3) Get the airport express and connect it directly to my 360 with an ethernet cable. Will i still be fighting for connection with the pc?
View 3 Replies
View Related
Mar 11, 2010
I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
View 2 Replies
View Related
Dec 13, 2010
Whenever I'm playing an online game on my Xbox 360 and my telephone rings, I am automatically disconnected from Xbox Live. My router and everything are downstairs, almost directly below my 360 which is using the wifi.
Would buying an Airport Express fix this? I'm thinking maybe it'll boost the wifi strength? I don't know, I'm not very skilled when it comes to internet stuff and I'm not quite sure why I'd be disconnected every time the phone rings. Anyone?
View 4 Replies
View Related
Dec 20, 2008
ok so heres the deal.I have my airport extreme upstairs which is providing wireless through my house with a speedstream router plugged into it. downstairs is my tv with my xbox 360. I just bought a aiport express so i can plug my ethernet cable from my xbox into and that will supposedly connect wirelessly to my extreme.
View 5 Replies
View Related
Sep 11, 2009
Just moved back to school and got our internet set up. Our internet service came with a simple cable modem and no router. I set up my airport express to give my apartment wifi, but the problem is, xbox doesn't have wireless built in (i refuse to purchase the wireless dongle). So my roommates and i purchased an ethernet network hub. We made one connection to my airport express, and one connection directly into the xbox. Now here's what we can't figure out. We can only configure one or the other to work at a time. We can't get them both to work at the same time. We configure the xbox, and the airport express won't work. We then reconfigure the airport, and we get kicked off of xbox live. Does anyone know a way to get both of these to work simultaneously?
View 2 Replies
View Related
Dec 8, 2009
I have an Airport Extreme connected to cable modem. I also have an Airport Express for some reason. My 360 is in another room.. and while I have a long enough ethernet cable to hardwire it to the router, that's pretty inconvenient and doesn't really look that good. So my question is... how would the connection quality be if I connect it to the airport express? Is it like hardwiring it?
View 1 Replies
View Related
May 23, 2009
setting up my xbox 360 with a xbox-live connection. I am planning on relaying my base station's internet connection to my express. Then connecting my express to my xbox via ethernet. if someone could inform me on the settings, for the xbox, extreme base station, and express.
View 2 Replies
View Related
May 7, 2009
I searched the forums but i couldn't find a specific answer to this question... I'm a kinda/non-tech savy girl who loves tech stuff but needs help sometimes
So I am interested in getting an airport express so I can capture the wireless from my netgear router and then connect my xbox 360 to the ethernet port to use the internet... I would also like to connect my desktop PC to the ethernet port to use the internet because I use my Macbook Pro for internet use. Since my desktop doesn't have a wireless card I won't have to buy an adapter for it if i use the airport express. I also want to use the airport express to connect to my AV receiver.
Basically in my room I have a desktop PC, xbox 360, AV receiver, and a tv. The reason I ask about the requirement to have an airport extreme base station was because it seemed like most of the posts on this topic said you need to enable "Allow this network to be extended" and i don't think my netgear router has this option, but i dont see why it would need it...
In my mind I would expect the airport express to be able to connect to my wireless network after i enter in the password, and then be able to connect my xbox or pc to the ethernet port...
View 2 Replies
View Related
Apr 22, 2009
We plug cable from the wall into our router, can I do this with the time capsule (extreme) / air port extreme base station?
View 6 Replies
View Related
Jul 2, 2008
I recently had Fios installed and they provide a router/modem Actiontec M1424. I have it set up so I am still able to get wifi off my airport express since it provides faster wifi speeds. I am having a problem with xbox live.
I keep getting NAT moderate instead of open. I opened ports 3074 and 88 in airport utility but no luck. Is it because it is going through two routers?
Anyone have a similar setup and have an open nat? The reason I choose not to use the actiontec is because on live the connection is terrible but I have an open nat.
View 3 Replies
View Related
Dec 29, 2008
So here is my deal. I have an airport express base station which i use as my router. It works just fine when i have it as my wireless router for my macbook and my pc when i have it locked using a WPA password. When i have it locked though it will not work with my xbox 360 and linksys wireless gaming adapter [URL:..] which i have. When i unlock the WPA and leave the airport express unlocked it will work with my macbook and my xbox 360, but it then wont work with my pc. I do not personally care about the pc, but my wife does. I also would like to have it locked and WORK with all three devices. Anyone have any suggestions for this lost soul?
View 3 Replies
View Related
Mar 24, 2009
I connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
View 1 Replies
View Related
Sep 22, 2009
I have been scouring google for hours to this solution and cannot find a solution.
I have an Airport Express acting as the router, connected to the ethernet jack in my dorm.
Now, my NAT is OPEN.
But I cannot connect to my friends online.
DOES ANYONE have a working configuration????
View 1 Replies
View Related
Jan 7, 2010
I am attempting to set up a wireless network with an AirPort Express in order to access the Internet from my iPod touch. My computer is a 2002 PowerBook G4/667 running OS X 10.4.11 (the latest OS it can run), and according to an Apple Store Genus, either the AirPort card or the AirPort antenna is shot, rendering the PowerBook useless as a wireless device. Adding to the pain, my cable modem has only one Ethernet port. Hence, I have purchased a Belkin F5D5050 USB/Ethernet adapter (and installed USBPegasusEthernet 1.0.9 as a kernel extension to make it work).
Which I plan to use to connect the AirPort Express to the computer (via the Ethernet port on the Express and the USB port on the PowerBook). The modem would be connected via Ethernet directly to the PowerBook's sole Ethernet port. Everything I read on the Internet says that I should be able to configure the AirPort Express over Ethernet via AirPort Admin Utility, but the utility doesn't seem to see the Express, even if I directly connect them to each other (one Ethernet port to the other). How I could make my network operational?
View 3 Replies
View Related
Feb 10, 2010
I apparently have a unique situation. My ethernet connection, if that is what it even is, comes out of the wall. No connection, nothing like that, it just goes into the wall, and disappears. They told me on the phone it's a LAN. I have my IP, Subnet, default gateway, and DNS numbers. When I plug the cord into my computer, using the IP4 thing, it works fine. I have to put the numbers in myself, no big deal.
Then I plug my APE in, and go into the utility to try to set it up. I enter all of those numbers. But run into all kinds of problems. Vista has no probs connecting my comp up to the airport, but airport has probs getting onto the net. I have fiddled around for hours trying to enter the numbers differently, but with no luck.
View 1 Replies
View Related
Sep 1, 2010
I was just checking if I can set the Airport express to receive my Airport Extreme's WiFi network and connect a non-WiFi device to the Airport Express ?
View 2 Replies
View Related
Mar 29, 2008
I have a problem with my Airport Express. I plug it in to the plug and connect the ethernet. When i go to search for the base station on Airport Utility it doesn't show it and it tells me to rescan to see if I can find it but it never does. Any ideas on how to fix ?
View 11 Replies
View Related
Sep 28, 2008
Basically I have a linux machine and I cant get the internet sharing to work either they ping each other however won't let it access the internet so thats a different story but; my dad claimed I could use the airport express as a wireless-to-Ethernet bridge, it's connected to the wireless network however how do I get it to transmit the connection through the Ethernet cable?
View 8 Replies
View Related
Apr 17, 2009
When i try to extend my network with my Airport Express it creates another wireless network, wich is not what i want.
I have a Leve1 router as my main, connected to my modem.
My airport express is connected to the network with a CAT5 ethernet cable.
I use the setup in Aiport Utility and choose:
I Want Airport Express to join my current network ->
I want to connect AirPort Express to my network using Ethernet to extend my current netork or create a second network ->
I choose my network on the list and click continue ->
I want to connect AirPort Express to my network using Ethernet to extend my existing wireless network ->
And then it doenst join my network, but creates a new called Apple Network 00a133..
View 6 Replies
View Related
Nov 28, 2009
i know that it is possible to connect a HD to the AE by the usb port but now that manufacturers are offering more and more external HD with ethernet is it possible to connect them to the Airport Express or do i really have to spend more to get the Extreme?
View 9 Replies
View Related
Sep 7, 2014
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
View 2 Replies
View Related
Nov 8, 2010
I recently found out that the Ethernet ports on the Airport Express Units are 100 MBits only. With a Time Capsule I am able to get 15-18 MB / sec via the WiFi, but the Airport Express, even though it has the same Air-capabilities, is limited to around 11 MB / sec through its Ethernet port. I hope they will get upgraded with Gigabit soon, I will replace all in my household. Is there any info on when it might happen?
View 4 Replies
View Related
Dec 17, 2010
Can the ethernet port on the the airport express be used to plug in a non wifi piece of equipment. Example I have a wireless router: WiFi to airport express (via ethernet connector) to xbox360.
View 3 Replies
View Related
Jan 18, 2009
The Apple site is quite vague on this point but I thought I'd clarify before buying one. I have a Time Capsule as my main router, but I want to move it, but when I do it's out of range of one of my computers. Can I plug the Express in near the computer, and then Ethernet it up to the computer, or is that Ethernet port meant to go into the TC?
View 3 Replies
View Related
Jan 26, 2009
is it possible to run both a wireless connection with airport express, as well as have a direct ethernet connection to the computer? i have a simple, two-way ethernet splitter than comes from the port in the wall that should technically be able to do this, but i have tried this without success and i am guessing there is a little more to this problem than just having both connections hooked up at the same time.
anyways right now i am running on an airport express wireless connection. at my school there is a campus-based p2p program that can only be accessed through direct ethernet connection, leaving me inaccessible to it when i am on my wireless connection. there is a bunch of registration junk that has to be done when i switch from ethernet to wireless, which is why i would prefer to have both set up at once.
View 3 Replies
View Related
Apr 19, 2009
I have a Airport Extreme and I would like to extend my network with an airport express but not sure if the airport express is only extending the network if it needs to be plugged into a ethernet if it is only bouncing the network on. Or does it have to have a fixed ethernet wire in it.
View 8 Replies
View Related
Jun 21, 2009
I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
View 5 Replies
View Related
