Final Cut Studio :: Can Hear Audio But Not See Footage In Viewer Or Canvas
Jul 1, 2014
Im working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
Ive had s few problems with my final cut. Im working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
I upgraded operating system to Mavericks, since then all footage I export from FCP as a QT movie has artifacts. I'm using FC 6.0.6. I have the settings optimized for download in the settings options ad data rate at 3000. I have been exporting like this for years with footage looking same as in FCP timeline. Mavericks doesn't work with older programs..I only downloaded the thing so I could run Da Vinci Light, it screwed up my mail system too.
I have Final Cut Express 4 running on an iMac with Leopard 10.3.5. The problem I have is I cannot hear a music track & the sound track on the film clip at the same time when I run the clip. I only hear the clip sound track until it finishes then the music track plays. If I drag the scrubber bar along the time line I can hear both the music & the Clip sound track together. This only happens when I logon to the Mac as an Administrator. (I have never managed to hear both sound tracks together whilst logged on as Administrator.)
In desperation I created a user account on my iMac. If I logon as a user Final Cut Express 4 works ok ? I hear both sound tracks together when I play the clip. Any ideas how I can make the Administrator account work as the User account does? As the iMac is only used by myself I don?t need any user accounts.
I recorded some gameplay footage using Yosemite's Quicktime Movie Recording feature. The audio is there when I play the quicktime, but when I drop it into Final Cut Pro 7, it wants to render the audio. I render it, but the audio is gone. Any way to have it convert the audio?
I want to create a digital file from a cassette tape.I cannot hear any audio through my iMac system speakers when I send the cassette audio into the audio input jack (mic). Using mid-2011 iMac running OSX 10.7.3
I´m completely new to the world of plug ins etc and has shot for the first time with a Sony PMW EX1. I now need to convert the footage to import it to FCPX. (I normally shoot with a DSLR so no trouble with import)
I have downloaded the PDZK-LT2 - Camera Import Plug-In Version 1.0 for Final Cut Pro X from Sony and opened the zip filed, moved what I got (file, dmg, zip and pdf) to the Application Support File in the Library. If this isn´t what I´m supposed to do - what and where?
Should FCPX recognise it when I want to import the footage and choose the plug in instead of the normal importer, or do I need to run it through the new plug in first, then import the new files to FC?? I can´t find any beginners info on this and it´s a bit lonely here trying trial and error with a tired head. I assumed it would just show up when I try to import it.
I'm using Final Cut Pro 10.1.3 and all my footage is on my external drive. Can I use this footage from the HD WITHOUT IMPORTING to my iMac HD? If so, how?
I got a Sony HDV HC9 today and I'm trying to upload some footage into Final Cut Pro. Now every so often it's coming up with "DV device cannot be initialized". I have no clue why this is. Is it something to do with the iLink being on or off? I have the import settings as 1080i50i so that shouldn't be a problem. I think i'm just doing something silly without knowing but it's driving me mad.
I need to edit together some video footage. I was going to digitize the footage on a PC (using adobe premiere) then edit it with Final Cut Express. I haven't purchased Final Cut Express yet, I'll only purchase it if I know it will work with footage digitized from a PC, does anyone here know if it's possible to use or import windows footage in to FCE? It will be saved as DV Avi files (I guess).
I just bought final cut express about a week ago, and haven't used it yet.. There's a youtuber: [URL] Who does insane editing . He uses Sony Vegas. Is it possible to do this kinda thing in Final Cut Express? Also, in Final cut you have to Render every time you import or change something. It takes me hours trying to edit something. Do you have to render with sony vegas?
editing with FCPX. I imported the footage through Image Capture like I did when using iMovie. I then imported the footage from my desktop into FCP. When it's just showing the thumbnails, it looks bright, like it did on camera. But when I scrub through it, or play the video, it appears very dark. Almost like it's with a filter. I tried to mess around with the buttons near the view screen, but they didn't do anything. Is this a settings problem or a FCP problem, and how do I fix it?
Basically i started a new project on final cut, just as always my import settings remained the same as i always use. My playback screen in the window and full screen plays back footage that does not fit the screen, i also exported a sample and the same thing happened where the video does not fit the screen.
I purchased Snapz Pro X to record screen capture footage for a project I am doing. After recording the .mov files I imported them into FCP and edited together a sequence along with music and titling. Unfortunately in the output video the footage looks compressed and fuzzy. I have the project resolution set to an HD setting, but I'm still getting a fuzzy looking screen shot. What is the proper way to import screen captures into FCP and how do I export them without loosing resolution.
Just updated to 10.1.2 and now the letterbox effect is not visible if i view in full screen but is working in normal interface viewer.
Instead if I keep a png cinema-scope 2:35:1 on top of all the layers... in normal viewer its fine. but if i view in full screen (viewer) the cinemascope does not work on the top and only on the bottom it is visible in unusual size...
I purchased a Mac Pro last Thursday after running a G4 350 MHZ machine for far too many years. But it had been such a good machine I focused on it and took my eyes off of technological progress. I thought the PCI buses in the Mac pro were just faster versions of the kind of PCI in the G4. The G4 was outfitted with a Revolution 7.1 sound card from M Audio and that fed into a Creative 6.1 speaker system (with internal amp). The sound was amazing. It was my hope that I'd be able to transfer this card to the Mac Pro and discover even higher quality sound. But before I even tried plugging it in I did some checking and found that PCI Express is an entirely different technology than PCI.
M-Audio has stopped making the Revolution even though they still have drivers for OS X 10.5 (for folks who put this OS onto machines with the original PCI slots, I suppose). So now that this dream has shattered I am wondering what are my options for being able to hear great sound from my new computer. The internal speaker is OK for the beeps and buzzes produced by an OS that wants to get your attention but it sounds horrible when you're trying to watch a surround sound DVD. I'd like to hear from any Mac Pro owners who have found a way to make their computers deliver high quality sound. I know the Mac Pro has optical in and out but have no idea how I could make use of this other than to plug into a rather high priced surround amp.
I have a youtube video that is a tribute/interview of my grandmother, who unfortunately just passed away. YouTube has stripped the audio because on some parts of the video there is background music. I would really like to be able to watch/download this video with the audio - does anyone know a way to get around this?
fwiw: I don't have the original file, and downloading the video via pwnYouTube results in a silent mp4 file.
I have Final Cut Studio 2.0.1. Retail version. I got it with a 2nd hand MBP I bought recently, and I plan to sell FCS2. I have no need for it, iMovie is fine for me.
But I don't have the big fancy box or manuals included... what is meant to be in the box?
I do have...
- 9 installation CDs in the small black apple box.
- Final Cut Studio Software License agreement.
- 'Installing Your Software' documentation with serial numbers.
- Apple Software 'Proof of Purchase' coupons.
If anyone has FCS2 and can tell me what I'm missing, I can advertise it more effectively and truthfully!
i have a macbook and was wondering if you could run Final cut studio 3 on it? i heard that i wouldnt be able too run motion, but didnt know for sure. I'm geting ready to upgrade the ram in my macbook too.
i was shooting an image film with a CANON XF100, and now i have a severe audio problem! All the data (imported via SD-Card to my Mac) was somehow corrupted. It sounded like "Trash", always cut-off or so. I tried to import it to FCP7, yet no success. Is XDCam going to work or any other method to encode MXF to MOV?
how to encode the MXF-files to (uncompressed) MOV or MP4-files. If possible, without a 3rd party-software to purchase. i know some software too, yet Handbrake or VLC seems to fail, too.
So, simply a way to either convert the MXF-data directly into a FCP7-proejct or maybe FCPX, OR simply to convert it to a MOV or MP4, whatever FinalCut can use and import...
