I recorded some gameplay footage using Yosemite's Quicktime Movie Recording feature. The audio is there when I play the quicktime, but when I drop it into Final Cut Pro 7, it wants to render the audio. I render it, but the audio is gone. Any way to have it convert the audio?
Info:
iMac, OS X Mavericks (10.9.4)
I would like to capture my iPhone screen in action for purposes of demonstrating its usage to others (e.g. How do I create and send a text?). I want to be able to use this in a FinalCut video.
View 5 Replies View RelatedCan't log and capture hdv footage (on dv tape) using Firewire into FCP 6. Keep getting message: Unable to Initialize Capture Device.
Went to easy setup and I think I got that right and matching my camera setting (HDV 30p). Not sure what I'm missing.
Info:
iMac, OS X Mavericks (10.9.4)
I have footage that has a hum throughout....
Is there anything tone done to eliminate/minimize this noise?
ios 7.1.1 did not installed in my iphone
View 1 Replies View RelatedIm working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
View 4 Replies View RelatedI am receiving this error message when opening an audio file in Soundtrack Pro. How to solve this issue?
Info:
iMac, OS X Mavericks (10.9.3)
I'm still using final cut pro 7, last week while I was working on a project the screen turned blue w/white lines, ever since I could not use FCP 7 anymore.. I updated the OS, I even formatted the internal HD, but no success
View 5 Replies View RelatedI was asked to video screen capture a program on a pc laptop for a tutorial, and to mix it in with my footage that was shot 1440-1080, 30f with my Canon XHA1. Does anyone know the best program I can use to video screen capture the pc, that is professional, and not expensive? Or any methods of preparing it for FCP?
Information:
17 MacBook Pro 2.6 Ghz 4 GB
Mac OS X (10.6.2)
3x2 tb WD Studio Edition, Canon XHA1, Canon 7D
I purchased Snapz Pro X to record screen capture footage for a project I am doing. After recording the .mov files I imported them into FCP and edited together a sequence along with music and titling. Unfortunately in the output video the footage looks compressed and fuzzy. I have the project resolution set to an HD setting, but I'm still getting a fuzzy looking screen shot. What is the proper way to import screen captures into FCP and how do I export them without loosing resolution.
Information:
MacBookPro
Mac OS X (10.4)
Aghh, i am so annoyed that i have to render everytime i make little changes i have to render the whole video project. I know there is a way i can render it once and just once. I heard of a program called MPEG StreamClip, but it did not work for me. The instructions i fallowed where: Open video, and drag it to MPEG STREAMCLIP. Export to Quicktime these are the settings i used....
screen shot here
According to the person who provided the instructions, i was only suppose to mess with the settings highlighted in the screen shot. Sadly, this did not help, i still have to render. Does anyone else do it differently?
When I export a QT video in Final Cut Pro, I look at iStat and my CPU usage is total around 25%, with that usage being spread evenly through the cores. Is there a way to get it to take absolute full advantage of the processors, or is it doing its best job?
I have the new octo 2.8 MP.
So ive been having alot of trouble with rendering a 6 minute video on Final Cut Pro X.
I go to file, share, and use HD 1080p, the video gets about 25% through when this error comes ups:
and then when i click on 'details' this comes up:
Ive looked up this problem and I cannot find a solution, I've tried doing whatever i can think of like copy and pasting it all into a different project and trying that, creating a new event and pasting it into a project there, ive tried turning off App Nap too.
Also, all throughout editing this actual video i kept running out of disk space and alot of errors would come up, so when this error came up i thought it might be that and i deleted alot of things i didnt need and cleared out my trash but it hasnt made a difference.
Info:
Final Cut Pro X, OS X Mavericks (10.9.2)
i was trying to get a screen capture of an issue with itunes when previewing tv shows/movies..etc but it appears you can no longer take screen caps of iTunes movies/tv shows (well ones you didnt import yourself).... or is there a work around?
View 1 Replies View RelatedI have been a pc user my whole life and am researching to get a mac because I have used the imove at my friend's imac and it was NIZzzzze! Anyways, I would like to get the base model of the mac mini (probably upgrading the ram to 4gb) along with Final Cut Express 4. Does the mac mini have enough juice to run Final Cut Express 4? Anyone has any pointers in terms of rendering with Final Cut Express 4?
View 1 Replies View RelatedI have an iMac with a 2.8 GHz intel core 2 Duo, 2GB 667 MHz SDRAM, and a 750 GB hard drive with over 400 GB of free space. I just purchased Final Cut Express 4 and when I uploaded my first clip and I tried to render it, it said that I have "insufficient disk space to render." I don't understand how this is possible, I may just have a setting messed up but I need step by step instructions to switch that setting
View 2 Replies View RelatedWill Final Cut Studio 2 run on my 13.3 inch 2.6 ghz Alum Macbook?
View 3 Replies View RelatedWill Final Cut Studio Run on the New Macbook Pro
Macbook pro 2.53GHz both 13" and 15"Rocks
Can all of the Macbook pros run final cut studio 2
View 2 Replies View RelatedI have Final Cut Studio 2.0.1. Retail version. I got it with a 2nd hand MBP I bought recently, and I plan to sell FCS2. I have no need for it, iMovie is fine for me.
But I don't have the big fancy box or manuals included... what is meant to be in the box?
I do have...
- 9 installation CDs in the small black apple box.
- Final Cut Studio Software License agreement.
- 'Installing Your Software' documentation with serial numbers.
- Apple Software 'Proof of Purchase' coupons.
If anyone has FCS2 and can tell me what I'm missing, I can advertise it more effectively and truthfully!
i have a macbook and was wondering if you could run Final cut studio 3 on it? i heard that i wouldnt be able too run motion, but didnt know for sure. I'm geting ready to upgrade the ram in my macbook too.
View 1 Replies View Relatedi was shooting an image film with a CANON XF100, and now i have a severe audio problem! All the data (imported via SD-Card to my Mac) was somehow corrupted. It sounded like "Trash", always cut-off or so. I tried to import it to FCP7, yet no success. Is XDCam going to work or any other method to encode MXF to MOV?
how to encode the MXF-files to (uncompressed) MOV or MP4-files. If possible, without a 3rd party-software to purchase. i know some software too, yet Handbrake or VLC seems to fail, too.
So, simply a way to either convert the MXF-data directly into a FCP7-proejct or maybe FCPX, OR simply to convert it to a MOV or MP4, whatever FinalCut can use and import...
Is there a way to run Final Cut Pro Studio 5.1 HD on Mavericks? An emulator? A patch? Anything? I can't afford to buy a THIRD copy Final Cut Pro! (I now have FCP 2 and FCPS 5.1.)
Info:
MacBook Pro, OS X Mavericks (10.9.3), Legacy software
Has anyone heard any rumors of a new Final Cut Studio coming out? It feels like there should be a new one coming out soon... I'm afraid that if I buy it now they'll announce some release or something like that this June.
I have Studio 1, and would like to "upgrade" (I can't legally because I have the student version), but it's no big deal for me to wait.
I bought a copy of this on eBay and most of the CD's are not the latest versions. For example, I have Final Cut 5.1, SoundTrack 1.1, etc. The box shows the latest versions on the cover but the CD's say otherwise.
The seller said those are the version Apple shipped him in Sept 07. Is it possible that Apple included older versions of the software for the academic version or is he ripping me off?
I'm close to approaching graduate school, majoring in film directing, and was told that the school i want to go to use Final Cut Pro as their default video editing program. It'd be nice to use their computers but i would like the entire suite on my mac but not sure if my macbook would run it well. What's the best specs to make FCS run very well on a mac? I was planning on getting either the low end iMac 21inch or the lower end macbook 15.
View 3 Replies View RelatedI just installed the motion 3 dvd from the final cut studio 2 but i can't locate it anywhere in the applications or elsewhere. can't find in with search. when i go through final cut pro it also isn't available in send to menu, while color is.
I'm not sure if i'm missing something here. the installation went fine with a reboot. I tried re installing which also seemed like it happened without any problems but no traces of motion.
i have no clue where it is, unless it changed it's name and is hiding somwhere.
I need to reinstall FCP Studio 2 to repair a messed up Compressor app. How go I go about uninstalling such a large program? There are preference panes and plists and various programs. Should I use an app like app delete or is there another way?
View 1 Replies View RelatedLast Saturday, I purchased the 15" 2.53 GHz Macbook Pro (the new one that has the battery built into it). Everyone in the store told me it would run FCS2 fine, but after I checked online, it seems that may or may not be the whole truth. Here are the specs:
2.53GHz Intel Core 2 Duo
4GB 1066MHz DDR3 SDRAM - 2x2GB
250GB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD-R DL/DVD-RW/CD-RW)
SD card slot
Built-in 7-hour battery2
NVIDIA GeForce 9400M graphics
I need something portable so I can take the projects I'll be working on along with me and due to financial reasons, I neither want the 17" or the 15" (2.8 GHz) MBP. I have a 1TB Firewire 800 WD external HDD, so I'm not worried about space. What I am worried about is rendering speed and such. So, my questions are:
1. Is this MBP sufficient enough to run FCS2?
2. Should I keep this same MBP but upgrade to the 7200rpm drive?
3. Should I pony up another $300+ and get the 2.66GHz MBP with the 7200rpm drive?
4. Taking into account what I've said, what is my best configuration to run the FCS2 suite?
My old Mac drive died and bought a Air. Trying to install Final Cut but bumping into error on trying to install Studio. I have an upgrade to Pro but I have been told that I need to install Studio first. I have all the original disks.
Info:
MacBook Air, OS X Mavericks (10.9)
