I want to create a digital file from a cassette tape.I cannot hear any audio through my iMac system speakers when I send the cassette audio into the audio input jack (mic). Using mid-2011 iMac running OSX 10.7.3
View 3 RepliesI have audio that is being sent to my MBP through an audio in line that I would like to monitor for audio quality. The only way I know how to listen in real time to the audio is by way of Audio Recorder, but it seems a little unnecessary to have a recording application open simply to listen to my media that is being sent in. Is there a feature already part of OS X that allows me to turn this on? I looked in system prefs, but couldn't find anything to enable this. I will resort to audio recorder if I have to, but would be very happy if this was already a feature.
View 3 Replies View RelatedI cant hear the audio when I am trying to playback a video on photo-booth, or trying to watch video's. But I can hear the audio on everywebsite I go to?
Info:
iMac, Mac OS X (10.6.8)
I can hear the audio but see a blank screen. I've attached my Movie Inspector below. Any way to get the video to show?
Info:
Windows 7
I am using MacBook pro 13 inch, suddenly I am unable to hear any sound from my MacBook.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
I purchased a Mac Pro last Thursday after running a G4 350 MHZ machine for far too many years. But it had been such a good machine I focused on it and took my eyes off of technological progress. I thought the PCI buses in the Mac pro were just faster versions of the kind of PCI in the G4. The G4 was outfitted with a Revolution 7.1 sound card from M Audio and that fed into a Creative 6.1 speaker system (with internal amp). The sound was amazing. It was my hope that I'd be able to transfer this card to the Mac Pro and discover even higher quality sound. But before I even tried plugging it in I did some checking and found that PCI Express is an entirely different technology than PCI.
M-Audio has stopped making the Revolution even though they still have drivers for OS X 10.5 (for folks who put this OS onto machines with the original PCI slots, I suppose). So now that this dream has shattered I am wondering what are my options for being able to hear great sound from my new computer. The internal speaker is OK for the beeps and buzzes produced by an OS that wants to get your attention but it sounds horrible when you're trying to watch a surround sound DVD. I'd like to hear from any Mac Pro owners who have found a way to make their computers deliver high quality sound. I know the Mac Pro has optical in and out but have no idea how I could make use of this other than to plug into a rather high priced surround amp.
I have a youtube video that is a tribute/interview of my grandmother, who unfortunately just passed away. YouTube has stripped the audio because on some parts of the video there is background music. I would really like to be able to watch/download this video with the audio - does anyone know a way to get around this?
fwiw: I don't have the original file, and downloading the video via pwnYouTube results in a silent mp4 file.
I rented a movie and can hear the audio but can't see the video. Where can I reload the movie or can I get my money back?
Info:
MacBook Pro, Mac OS X (10.7.3)
Ive had s few problems with my final cut. Im working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
View 2 Replies View RelatedIm working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
View 4 Replies View RelatedWith my PPC G5 the microphones audio is either too low or none existant. I have gone into system preferences and set the input audio to the max with no change. Does the G5 have a special audio input impedance or is there another setting I should investigate? The output analog audio is working 100%.
View 1 Replies View RelatedThe analog audio input on my Mac Pro has stopped working.Audio output still OK; USB audio input works fine but nothing from analog audio input.I know it's getting a signal as I can send the mixer output to a Zoom H4n and it records fine, but I need it to go directly into the computer for tutorial voiceovers. I've tried recording in Quicktime Player, Soundtrack Pro, Camtasia and Screenflow.I get no volume indication in the System Preferences>Sound panel.I opened Apple Midi Setup>analog input and I can adjust volume on the two channels but "Master" is stuck at zero.
Info:
Mac Pro, Mac OS X (10.7.2), MacPro2,1 Quad-Core Intel Xeon
I am planning on buying a device that will allow me to convert cassette tapes to mp3 output. The output interface is usb. Can music be input to a Mac through a usb port?
Info:
OS X Mavericks (10.9.2)
Why can't I hear my music keyboard when it is connected thru the Analog Audio line-in port? Looking at the System Pref. - Sound menu - in-put - Line in Built-in Audio, I can see activity on the input levels when I press the Kawai piano keyboard but no sound is heard. All other sound systems- I-tunes etc are operating properly.
Info:
power mac G5, Mac OS X (10.5.8)
I have a mac mini (solo intel) 10.4 OSX. I have no audio output when attaching an external input source like a CD player or ipod to the input jack on my Mac Mini. Audio output from ITunes or movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.
I have the "Soundflower" App. installed but turned off.
why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source does not? Is there some software or a driver required for audio output from an external source that is not required for audio output from an internal source?
I have an older Yamaha receiver (RX 596) that has no optical audio in, only traditional RCA inputs. I tried using a 3.5 mm mini audio to RCA adapter that would transfer my headphone output to the CD or AUX input on the receiver. Of course the audio was crap, lots of humming and low volume level.
I also have a Canopus ADVC 110 digitizer. Can I input digital audio from the MP to the ADVC 110 with an optical to RCA converter, and then output the analog audio from the ADVC 110 with RCA cables to the RCA inputs on the Yamaha? Suggestions please for the easiest/cheapest way to get quality audio out of my MP and cleanly into my receiver.
I know the 1/8" minijack is both analog and optical, but I was wondering if the input jack is the same.
View 1 Replies View RelatedOn the pictures i can only see one audio input... But it says on the system
[URL]
Does this mean that i can use it as input and output??? I dont need both at one.So can I record a song wit Cubase over this input?
Info:
MacBook Pro, Mac OS X (10.7.3)
How I would like to ask, how to delete an audio input. I know it is in czech but point is to delete that pointed audio input.
I am not able to get rid off that Greatdy Audio, already wrote them an email but got no answer.
I tried to find the file but no luck.
It is also interfering with mine FaceTime and skype.
I have Final Cut Express 4 running on an iMac with Leopard 10.3.5. The problem I have is I cannot hear a music track & the sound track on the film clip at the same time when I run the clip. I only hear the clip sound track until it finishes then the music track plays. If I drag the scrubber bar along the time line I can hear both the music & the Clip sound track together. This only happens when I logon to the Mac as an Administrator. (I have never managed to hear both sound tracks together whilst logged on as Administrator.)
In desperation I created a user account on my iMac. If I logon as a user Final Cut Express 4 works ok ? I hear both sound tracks together when I play the clip. Any ideas how I can make the Administrator account work as the User account does? As the iMac is only used by myself I don?t need any user accounts.
I've searched hi and low all over my mac mini and can't find an audio input on it anywhere. I've got an audio output socket for a mini jack, but no input.
Is this usual? And if so, does it mean that the mini is still capable of audio input if I use an usb interface?
Basically I want to input some audio from a guitar and mic and wanted to know if this was going to be a possibility.
I am simply trying to connect my guitar to my mac by using a 1/4 to 1/8 adapter and inserting it to the input on my mac. Once iv done this i go into my sound in system preferences and it shows on the volume bar that its maxing out and once i go into garage band to try and record something all i hear is a "click click"! I have no clue what it is?
Mac:
2.1GHz Intel Core 2 Duo
Would a standard 3.5mm audio input cable work? Would it fit in the port on my MacBook Pro? These are the cables I am looking at: [URL]. Port Image. I am looking at recording music from my Record Player to my computer with this Tutorial: [URL].
View 2 Replies View RelatedThis is probably a silly question, but I was wandering if it was possible to pass audio from the line-in on a MacBook Pro directly to an audio output? I was thinking of buying a PS3 and connecting it to my external monitor, and thought I may be able to play sound through my soundsticks rather than buying more speakers (budget is an issue!).
I know this used to be possible in the "Audio MIDI Setup" application bundled with the system, but I can't seem to find the option in the new version (maybe something to do with aggregate devices?)
I plug in an audio input on my mac ibook G4 and go on system preferences which allows me to select my audio input as a source of sound input BUT when i then proceed to go onto Garageband, Garageband detects my audio input on its preferences but will not allow me to select and therefore leaving me unable to record from an audio input.
View 1 Replies View RelatedThis headphone/headset that is equipped with a mic does not work properly when I connect it to the audio input opening. The headphone/headset is only equipped with one plug (is this the proper term?).
When I adjust the audio setting (apple icon--> System Preferences --> Sound --> select "Input" tab --> highlight " Line in; Audio line-in port") I can only hear sounds through the headphone but the mic portion does not pic up. If I hit the mic portion I see the bars move, that would indicate some sound being picked up. However, when I try to use the mic, through Mac Office Powerpoint 2010, the sound (if received through the mic) does not pick up.
Why is this happening? Do I need some extra external component for the microphone part of the headset to work or do something extra in the System Preference area?
Info:
MacBook, Mac OS X (10.6.8)
I recently had a cracked panel on an old Macbook Pro 15 inch (A1260) and just replaced it with a new one. Ever since i replaced it i have had no sound. Now i consider myself an experienced mac user so i have checked under my sound prefences and it doesnt list anything under sound input or output and things are grayed out. I also had the guy who replaced my panel, who is also my friend, check everything out and he hasn't been able to figure out why there is no sound. he gave me a usb midi device that shows up and works but when unplugged theres nothing.
Another thing that has started is, video online will stop every 11 seconds, and thats with me clicking on the bar when it stops playing after the first 11 seconds.
Info:
MacBook Pro, Mac OS X (10.7.4)
Is there an optical input on the 13" 2010 macbook pro? Or is it strictly output only?
View 3 Replies View RelatedHow can I disable this?
I want it to only record an application, say Skype or Firefox. But, yet it uses the mic on my MB and I can hear myself talking as well as my keyboard.
I am about to buy a 15 in. MBP and I'll be going on a trip soon. I was wondering if there was anything I could get that would let me both use my mac as a tv for my xbox and use a tv as an additional monitor.
Something that would have RCA input/output (the red, white, yellow cords) and would connect to my mac with USB or hopefully firewire 800 (express card 32 would work as well).
