I'm creating audio fade in and out transitions on my voiceovers. I want them all to fade from -3dB. Is there a easier way to apply this on every audio track without applying it manually / one-by-one?
I tried selecting them all and change it in the inspector, but it did not work. As in, it did not have any effect.
So garageband now makes it very easy to make ringtones, but they sound stupid, when I make them because they end so abruptly.
How could I take the single track and have the music accelerate up in volume at the start, and down towards the end, so that it doesn't just start and end?
I make music videos, and I need to be able to fade-in or fade-out. Does anyone know a program with this feature? I need to be able to upload the video from my camera to the Mac and use the software to edit it.
Info:
iMac, Mac OS X (10.7.2)
I have it set to change every 30 minutes, and it does. However, instead of it doing the nice fade, it only changes. Not so pretty compared to the fade.
View 4 Replies View RelatedI was export timeline xdcam 35 mbs, 720p 50 fps to MP4 720p 50 fps.
When looking video on Mac everything is ok, but, when I copy MP4 file to USB and put directly to LCD there is only video, no audio? Before on G5 I was use matrox compress card, and always MP4 file was ok on LCD. Where is problem?
Still working on getting audio exported to an AAF, and having problem doing this. So, how FCPX is handling my audio. When it's on the timeline, is it being conformed to the frame rate of the video?
When audio is exported, does FCPX force it to conform to the video frame rate in the project settings, audio properties, or both? Or does it allow the audio to export at whatever rate the original media is at?
I export an XML from FCPX, then open that with X2Pro and it makes an AAF file, but a report tells me that "Conform rates are not supported. The Conform rate at 01:04:49.23 has been ignored." So when I go to that timecode, all I see is video at 24p and a detached audio piece at 23.98. Why are these different?
Info:
Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM
I'm trying to take an event with me mobile when I disconnect from my RAID. Currently all the original media is located outside of my library on an external drive. My library is located on my Internal HD.
I have deleted generated event files, then set the new media location to my Internal HD, and then prompted FCP to generate proxies. When I disconnect and switch to proxy view, I have all my video but no audio. When I switch to proxy when connected to my RAID, the audio is there. I have repeated the process only to see that no audio clips are present in the media management portion of the background renders window when generating proxies. Also, when I am disconnected from my RAID and switch to proxy, no missing media icons appear, only audio clips with no waveforms.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3), 2.6 Ghz i7, 1TB, 16GB Ram, Nvidia
I'm working on a large edit with footage imported into FCPX from a SonyXDcam. Three clips have audio that is out of sync. The others are all fine. What happened to those three and how do I fix it?
Info:
iMac, OS X Mavericks (10.9.2)
Using 7toX for Final Cut Pro ... two issues:
1. I export and XML from FCP 7. I use 7toX to convert it and import it into FCP X. Does a great job. But I notice that 'some' of the clips on a given timeline (project) are missing their audio. If I 'Find in Browser' and 'replace' the clip on the timeline with the clip from the Browser I get my audio. It's a bit of a laborious process. So the FCP 7 to FCP X is working fine in terms of the actual clips themselves, but the 'sequence' or 'project' being translated over, the audio is missing on random clips.
Maybe it's the clips that I had a slight sound adjustment on, I'm checking. But still, it would be nice to know how to export the XML properly so as not to have issues.
2. I have the audio dipping behind the voice-over in the original FCP 7 sequence. When I import the sequence into FCP X I can still HEAR the dip, but I can't see any keyframes to adjust. I'm wondering what the protocol is here ..
The audio in the timeline is distorted. The clips play well in the browser and the waveforms look ok in the timeline. When I click on the volume line in the timeline it becomes a double yellow line that I don't recall seeing before. This all happened after an auto update to 10.1.2
View 9 Replies View RelatedWhen I synch audio/video I get either a file with audio only or a graphic representing a compound clip.
if I could choose two clips and let FCP X synch them with a click, but that's not my experience at all...
how to reaconnect video and audio of a one clip, after you have detached it
View 1 Replies View RelatedI have footage that has a hum throughout....
Is there anything tone done to eliminate/minimize this noise?
How do I sync audio to video I've already put on the timeline and cut in FCP X?
View 4 Replies View RelatedA friend is cutting a film 3,000 miles away. She's just received a stack of video files, AVCHD I think, along with .wav audio files recorded simultaneously on a Zoom. Whoever shot the footage didn't think to number the Zoom files to match the video files. So my friend will have twenty video files with matching Zoom recorded audio files - but no clue as to which goes with which.
I'm wondering how the sync mechanism in FCP X might be employed to solve her problem? I've often linked a single known video file with its single known audio file - made a synced clip. Easy peasy. I'm wondering, does my friend have to highlight a video clip and then each of the audio clips in turn until she finds the two that will sync up properly? I'm also wondering if FCP X will artificially (inadvertently) sync whichever two (video & audio) you highlight even if they don't match -- making one messed up synced clip.
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
I know there have been a couple other threads on this from a couple months ago but I need to bring this back up... has there been a final verdict that the reason the mini displayport doesnt support audio is due to a hardware limitation or a software limitation?
View 9 Replies View RelatedRecorded audio with a good sony wireless mic in a room that didn't have much in it to absorb sound, the audio is great except that it sounds like it was recorded in a large hall or something. I'm editing with FCE 4.01 on a macbook with OS 10.7.5 and I'm not very familiar with audio filters, how to get rid of the echo?
Info:
MacBook, Mac OS X (10.6.8)
I updated to final cut 10.1.3 and none of my videos show the waveform in the timeline. How do I get the audio waveforms back? If I bring in a new video it also doesn't show the audio waveforms in the timeline. The waveforms do show in the browser but it is hard to edit them from here.
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
Just updated to 10.1.3 from 10.1.2 and video files import without audio into library. Audio shows and plays in media import window. Everything from before update is fine.
Info:
MacBook Pro, Mac OS X (10.6.8)
Is there any way in FCPX to delay the audio playback to be in sync with an external monitor.
In FCP7 it was called "Frame delay".
I have no standalone audio delay available.
I´m cutting music videos and while the external video (BM Intensity Extreme via HDMI) is only delayed 2-3 frames, it is virtually useless...
Ive had s few problems with my final cut. Im working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
View 2 Replies View RelatedI did a shoot with audio on a green screen stage. I have some video clips of my actors shot on a RED Scarlett in 4K 29.97.I have audio clips recorded on a Zoom H4 with a boom mic at 16 bit 44.1 khz.
I take the 2 clips in FCP X and I create a synchronized clip. The video clip doesn't have an audio channel so I have to manually sync using the slate. I have the correct audio clip and the correct video clip, but the audio clip is longer than the video clip. It's just running a tad slower than the video clip. I tried creating a project in 44.1khz instead of 48khz and FCP X didn't treat it any differently.
I've been trying to to export my Audio from FCPX 10.1.3 as Separate Files (per Roles) from a Multicam clip but it stops and freezes after exporting the first Audio track listed in the export setting. Example:
I have a Multicam clip with 3 Audio Roles (Bob, John and Marc, all assigned to their Audio Roles).When i export Audio as Roles (separate files), i then select all the Roles i want to export: Marc + John + Bob. It will export up to 35% or so and freeze.Then i look in the Finder location of the export to see the audio of Marc only.
If i put John + Marc + Bob, i will see the Audio for John only and so on.If (i have to at this point) i cancel the export, the audio file gets deleted and i get nothing out of FCP. Is there a way to export Audio as Separate Roles file from a Multicam clip or do i need to add all the Audio clip separately from the Multicam on the Timeline?
I'm adding the audio in the Multicam clip so that, if i want to remove a chunk of video from the timeline, The audio attached to it will also be removed and everything stays sync'ed after the cut i made.
I tried Detaching the Audio from the Main Timeline. I then get the Audio but still in a "multi cam" bundle. When i select that and look in the Inspector, i see all the Roles but i can't Export like i want to.
Info:
OS X Mavericks (10.9.4), Final Cut Pro X (10.1.3)
I’ve got the locked edit in FCPX. 90+ min, 8000 clips.Timeline is set at 23.98, clips on the timeline are some 23.98, but mostly the BMCC 24p. No prob for FCPX. It plays with whatever you throw at it. The problem comes in when I’m trying to export OUT, because the other programs don’t like it. Like I’ve got to get my audio post engineer this AAF for ProTools out with X2Pro. X2Pro doesn’t support this "retiming" that FCPX does and spits out warnings for non-conformance. What to do? Change all the clips to 23.98 or change all the clips to 24p, or is there some other better/easier way to get that audio (with syncing video) out to ProTools?
Info:
Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM
I have a major problem with FCP 10. I cannot for the life of me figure out how to do a simple audio level adjustment using the keyframe editor. I have a audio-video clip that is using dual channel mono audio. I have a shotgun mic on one channel and a handheld mic on the other.
I've gotten as far as getting both incoming channels to playback on both outgoing channels. What I need to do is to shut off one channel or the other, periodically, in order to preserve the quality of the audio. FCP won't let me use keyframes and the range editor wasn't work either. It should be simple but it seems that it isn't. What do I have to do to cause FCP to do this very simple operation?
I can't make the left/right audio edge command working. I set it up in my custom way but any command I set for it, it doesn't work here (if I type the command the audio clip is simply deselected).
Info:
Final Cut Pro X, OS X Mavericks (10.9.2), 10.1
Someone edited a sequence for me in Premiere. The audio was recorded 4 channel on a external recorder (four mics were used). At times, he used the wrong channel in the timeline. I believe what he did was take all the channel one audio and put it on the timeline and deleted the other 3 channels. Hence In many cases, using the wrong mic.IS there a way to swap channels in the timeline? I would almost need to do a reconnect, but swap channels at the same time. I use FCP and will convert this to a FCP sequence using 7toX.
View 2 Replies View RelatedThe audio and video are out of sync after importing to FCP 10.1 from my mini DV tape source. The audio and video are in sync coming out of the tape deck but they are out of sync by over a second in FCP. How to correct this?
View 2 Replies View RelatedIm working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound.
View 4 Replies View RelatedI need to strip the audio off of a few ProRes files with the end product being ProRes files; easy enough to do but don't want to degrade the quality of the original video (via any compression etc). If I just hit File/Share/Master File with the video-without-audio on the timeline, otherwise untouched, will it create an original-quality ProRes file essentially the original video without the audio?
View 2 Replies View Related