Applications :: Tuxera NTFS Vs NTFS 3G - Which Better For Normal User?
Aug 8, 2010
My Mac partition recently got corrupted to the point of needing a fresh install. I just starting installing my utilities again and downloaded the newest version of NTFS-3G. While doing this, I noticed that there was a "professional" version of NTFS-3G sold by Tuxera (who makes NTFS-3G). I tried to find information comparing the two, but can't; Even on their own website. Does anyone know what the major differences between them are? Is worth the $31 for a normal user (meaning someone who has a BootCamp partition, but doesn't always copy to and from it)?
View 21 Replies
ADVERTISEMENT
Oct 12, 2009
I need to recover some deleted pictures from my friends PC. Is there any program that will be able to read the NTFS formatted HDD?
View 4 Replies
View Related
Jun 11, 2010
This is a thread for anyone who is experiencing a large slowdown and/or intermittent 10-60 second freezes on Mac OSX Snow Leopard, where the freezes are completely unrelated to anything you're doing, any app you're using, or whether the system is under heavy or little use. I found the issue stems from the use of Mac Fuse (with NTFS-3G installed) and/or Paragon NTFS for Mac OSX, the combination of these 2 apps essentially doing the same job (NTFS write support), conflicts and causes the hard drive to be under constant (although very little) use, which can randomly cause 30-60 second freezes. If anyone is experiencing these same freezes, uninstall either one app or the other, or both, and that might help remedy the situation. EDIT: updated because I didn't specifically mention which macFUSE plugin I had installed....
View 5 Replies
View Related
Aug 8, 2009
I have 2 external HDDs that I am sharing with other PCs/Macs over the network. Interestingly, when I look up the info for each volume, only one shows as NTFS-3G whereas the other one shows as just NTFS. And this NTFS volume is causing so much trouble. It doesn't wake up after it goes to sleep, and when I power-cycle it, the data I have put in previously is gone! It doesn't seem to save the data properly. Perhaps because it's just NTFS, not NTFS-3G, I cannot run "Disk Repair" from the Disk Utility app. The button is disabled whereas for other volumes, the button is enabled.
At one time, I had to connect it to a PC to run the disk repair and was able to recover some of the lost data. What the heck is going on? Howcome it is showing as NTFS opposed to NTFS-3G? Both HDDs were formatted from PCs as NTFS. Only difference is that the NTFS is 750GB one, and NTFS-3G one is just 300GB. Does NTFS-3G has size limit?
View 3 Replies
View Related
Feb 6, 2009
I previously used NTFS-3G to write to my NTFS (Boot Camp) volume. Now, I would like to can it, and just use Apple's internal read-only NTFS stuff.. But the drive refuses to mount, if I disable or remove NTFS-3G.. If I try to mount it manually in Disk Utility, it just says "The disk could not be mounted. Try running First Aid".. I tried that, and it did not work (as expected). I have tried to create an empty file with TOUCH command in the root of my NTFS drive, called "ntfs-readonly". I have also tried to put that file in a directory called ".NTFS-3G" in the root. According to this site, it should tell NTFS-3G to mount that drive with Apples read-only driver. But this failed to work as well - getting the same error as above, when trying to mount it manually.
An interresting thing is, that when NTFS-3G is running, the format of the NTFS drive reads "Windows NT Filesystem (NTFS-3G)" - fine, that sounds logical. BUT.. When NTFS-3G is disabled, the format reads "MS-DOS (FAT32)".. Which, of course, is not true. Is Apples NTFS mounter broken on my system, maybe? If so, how can I fix that? I recall, that I removed NTFS-3G and Mac Fuse manually some time ago, using this site as guidance. That involved deleting the files it was using. I was very careful, but MAYBE I deleted one or more files, that Apples internal NTFS read-only driver needed... Can somebody perhaps assist me in some way? What can I try (apart from re-installing OS X using my Time Machine backup..)..?
View 1 Replies
View Related
Mar 16, 2010
Just started my forray into the whole Apple OSX life. Which app is better in your eyes?
View 10 Replies
View Related
Dec 17, 2010
We are having 20 nos of 3.06ghz intel core i3 imac with 10.6.4 mac os x and it is bind with Active directory, if the user move the folder inside the network shared drive smb(ntfs) it is prompting for macintosh administrator user id and password. sometimes it is moving without any issue.
View 1 Replies
View Related
Apr 14, 2009
Does anyone know a software to convert NTFS to HFS+? I had one but don't remember the name of it.
Edit: NM, I got it. It's TransMac.
View 1 Replies
View Related
May 23, 2009
Is there any way or program to recover data from an external hdd with a ntfs-structure that has been deleted using ntfs for mac (paragon) on osx?
I have tried several windows apps but i'm only able to recover the files that have been deleted in windows, the files deleted using osx don't even show up in the applications.
View 3 Replies
View Related
Nov 15, 2009
i am trying to install Windows on my Mac. i created the partition (+/- 20gigs) and ive inserted the Windows disc. the installation works fine although i noticed that i don't get the page that gives me the option to choose between ntfs or fat32... yet it continues, and says windows is installed... but when it reboots, it goes directly to my mac-osx
im not too good with computers but i've managed to find a lot of threads that were talking about my problem but none of them could really correct the problem.
some people said that it might be the version of windows that could be the source of the problem.
i have Windows Xp Corporate version. might that be the problem?
View 3 Replies
View Related
Sep 24, 2008
I have a clients compy they reformated it and killed their data... if i usb their drive?
I tried researching but can't find my answer...
View 1 Replies
View Related
Apr 13, 2010
I have just acquired an external enclosure for my 160GB 2.5 HDD, and I have it formatted as NTFS on a MBR partition table. I use NTFS-3G on OSX, and it's, of course, natively supported by windows. Well, I am having problems with hidden files between them. In OSX, the .DS_Store files, .Trashes and ._*name* files are hidden, but I can see windows' hidden files (RECYCLER, RECYCLE BIN, and System Volume Information). In Windows, I can see .DS_Store, .Trashes and ._*name* files from OSX, but not Windows' hidden files. I am looking for a way to solve this, or not have the files created on the disks.
View 6 Replies
View Related
Jun 30, 2010
I may end up getting another external hard drive & would like to be able to stay with NTFS so I can use it with either PCs or macs, there is a PC in my home & I would like to be able to use it between the PC & my macbook pro. Does anybody know of good reliable software that does not hog resources that will enable me to read & write NTFS on my macbook pro?
View 1 Replies
View Related
Aug 21, 2010
Was just wondering that are there any backup apps similar to Carbon Copy Cloner and SuperDuper that support formats others than HFS+. I did search via MRoogle but couldn't find anything. I would just like to have an automated backup of my home folder that can be accessed with a PC as well
View 6 Replies
View Related
Mar 30, 2010
I'm looking for a FREE data recovery app for os x to recover data from a NTFS hard drive. The hard has lost it's volume and will not mount and I've tried some other programs and I can see the files but I can't get them off because every program I've tried isn't free and won't let me copy them off. I've tried looking for one but I can't seem to find a good one. I just want to copy off the files and then I'll wipe the drive and fix the parition.
View 5 Replies
View Related
Dec 16, 2009
I am in need of a data recovery app that can recover data off a Fat32 drive and save the recovered data to a NTFS drive (I use NTFS-3G). I have PhotoRec but can't seem to navigate to my NTFS external to save the data (the only drive big enough to save the data too is my girlfriend's 500GB external and it is NTFS).
Any tips to getting photorec to navigate to the drive (I am pulling from one external to another). Photorec sees the one I want to save too I just can't get it to select it. Also if there are any other programs yall recommend, I will give them a shot.
View 4 Replies
View Related
Aug 20, 2007
I want to do the copy of the files from the external NTFS drive to my new Mac.If anyone can confirm whether that is or is not possible?
View 24 Replies
View Related
Sep 14, 2010
What is the best way to read/write with NTFS partitions (internal and external drives)? I have MacFUSE already installed with virtual machine.
View 6 Replies
View Related
Nov 29, 2010
Most of my data is stored on a 1TB drive that is currently formatted as ntfs. Do I need to convert this to fat (or fat32?) in order to use it on both machines in the future.
View 2 Replies
View Related
Jan 4, 2008
I'm intending on buying an iMac in a few days, just waiting for Macworld to come and go.
My question is this. I currently have 3 external Hard Drives on my PC. 2 x 360GB and 1 x 500GB. These contain MP3's, Photos/Videos, FLAC (Uncompressed Audio) respectively. Each disc is probably around 2 thirds full. They are all in formatted to NTFS.
Is there anyway that I can convert them to FAT32 without losing the Data so that the iMac can Read and Write to them when I swap them over to the Mac? (and is this even a good idea as I understand that FAT32 is extremely inefficient with volumes of this size)
The only alternative I can think off is to copy everything from the disks to the internal mac drive, reformat the USB drive for the mac and then copy everything back..
View 3 Replies
View Related
Oct 13, 2009
I currently have a mac and a windows pc, and need to transfer files between these two computers.
My Harddisk was formatted to Mac OS Extended and can someone guide me how to format it to NTFS since Windows cant recognize my harddisk?
View 23 Replies
View Related
Mar 30, 2010
So I have several external Harddisk that I formatted with NTFS-3G via the Disk Utility App on my Mac. I worked with the HDDs for weeks on my Mac without a problem. And now I brought the Harddisks to a friend and none of them can be read by Windows XP?!
We tried on several Machines, none seem to be able to read the NTFS-3G formatted HDDs. They're also not broken since they still work the second I plug them back into my MacBook.
So did I do something wrong? I also can't find a NTFS-3G driver for Windows.
It would kinda defeat the purpose that Windows can't read NTFS-3G...
View 2 Replies
View Related
Apr 26, 2010
Alot of ppl uses third party software such as NTFS-3G and MacFuse but i also found some ppl who just tweak with the mac osx ( by entering some lines in Terminal) such as this guy in http://www.youtube.com/watch?v=9Q_BrBk5KsI
My question is do both methods have the same effects and which method is better?
Also, if i were to partition my hdd in mac( as i want to install win 7 on it ) will i get the mac HD AND the windows HD on the OSX desktop?
View 6 Replies
View Related
Apr 27, 2010
I sold my Sony Viao last week and copied all my important files on a 250 GB WD Mybook drive. Now the thing is formated in NTFS and I know that NTFS is a windows thing. I have some video/pictures/music and documents(excel/word) that I would like to move to my Macbook Pro which I will be buying next week. Whats the best way to do this? I think I have around 50-60 GBs that I need to move.
View 4 Replies
View Related
Jul 25, 2010
Is there a free software that I can download so that my Mac can write on my external NTFS drive? I've tried Tuxera NTFS but that has a 15 day trial. So what's my best option here?
View 2 Replies
View Related
Jun 7, 2012
I tried many times but used the trial version. Now I'm having a hard time transferring files to my external drive.
View 2 Replies
View Related
Oct 5, 2009
I am running a MAC pro with OSX 5.8 and I'm trying to read/write files that are on a NTFS windows share point. Th eshare point is on an IBM AS400 machine. My problem is this, I can connect to the share point via the "connect to server" apple-K command and I can see the files and folders on the share point.
Recently another windows user has created a folder on the share point with some excel files in it. From my Mac I can't see this folder, it doesn't appear in the finder. I have Parallels 3 (windows XP) installed on the mac as well and when I connect to the same share point I can see and use the new folder.
View 1 Replies
View Related
Nov 15, 2010
I am trying to Install Windows 7 on my macbook pro (mid-2009) and during the beginning of installation, it says that windows 7 cannot install on the boot camp partition because its not NTFS. So I had to cancel installation. Anyone know how to Make boot camp assistant partition in NTFS? or in any way so I can install windows 7?
View 4 Replies
View Related
Dec 27, 2010
I've had my MBP since August of this year, but only recently connected an NTFS drive via Firewire for the first time. I am primarily going to be moving the data from the NTFS drive onto an HFS drive. My only issue is that my MBP is only recognizing one out of two partitions on the NTFS drive (The "first" partition. If I connect back to my Windows PC, everything is recognized fine. I've since moved the data that I want to transfer from Partition 2 to Partition 1 and I'm able to access it correctly, however I'm confused as to why this is happening (still fairly new to Macs).
View 3 Replies
View Related
Jan 12, 2011
i have a 1tb lacie external hard drive with 2 partitions. 1 hfs+ and 1 ntfs with 33 gig. i wanted to put windows 7 on the ntfs disk and followed a guide and did
SELECT DISK 1, CLEAN, CREATE PARTITION PRIMARY, SELECT PARTITION 1,ACTIVE, FORMAT FS=NTFS, ASSIGN, EXIT
When it was done my whole hd was ntfs and my hfs partition was gone. i tried Testdisk and did a quick search and a deep search (took me 2 days), but no result. i also used Mac File Recovery to find a lose volume or lost files but no result. Now i'm using r-studio and performing a scan but i think it won't find my lost HFS+ partition.
Is there a way to save my HFS partition? My entire photo life is on it. should i bring it to a recovery specialist? or does someone has the answer? maybe reformat it as hfs?
View 3 Replies
View Related
