OS X :: Convert NTFS To FAT32?
Jan 4, 2008
I'm intending on buying an iMac in a few days, just waiting for Macworld to come and go.
My question is this. I currently have 3 external Hard Drives on my PC. 2 x 360GB and 1 x 500GB. These contain MP3's, Photos/Videos, FLAC (Uncompressed Audio) respectively. Each disc is probably around 2 thirds full. They are all in formatted to NTFS.
Is there anyway that I can convert them to FAT32 without losing the Data so that the iMac can Read and Write to them when I swap them over to the Mac? (and is this even a good idea as I understand that FAT32 is extremely inefficient with volumes of this size)
The only alternative I can think off is to copy everything from the disks to the internal mac drive, reformat the USB drive for the mac and then copy everything back..
View 3 Replies
ADVERTISEMENT
Apr 11, 2009
I have a fall 2008 model macbook, 2.4 GHz 4GB ram, etc. I run windows XP SP3 on bootcamp, with a fat32 partition. I believe the external harddrive I run games from is also fat32 formatted.
I've had enough problems with transferring files over 4GB that i've decided to attempt to convert from fat32 to ntfs. I'd like to do it while on my windows partition, with the CONVERT C: /FS:NTFS in the command prompt. What precautions should I take before I attempt this? How difficult will it be to also convert my external drive to ntfs? Will anything be deleted in the process? Will I still be able to use parallels?
View 7 Replies
View Related
Jul 1, 2009
im running windows 7 allongside osx but the problem is natively osx has no ntfs write driver only read so there are 3rd party drivers but im getting tiered of them being slow and/or corrupting data and on the windows side i use macdrive has issues aswell so i want to convert the ntfs drive to fat32 i heard there were ways to get vista to run on fat32 even though it wouldnt install so im hoping this is the same
anyone know how i could achieve converting the driver from ntfs to fat without loosing data?
View 4 Replies
View Related
Jun 9, 2012
How to convert NTFS external hard drive to FAT32 without loosing data?
Info:
MacBook Pro, Mac OS X (10.5.8), Seagate Agent GoFlex 1.5TB
View 4 Replies
View Related
Nov 15, 2009
i am trying to install Windows on my Mac. i created the partition (+/- 20gigs) and ive inserted the Windows disc. the installation works fine although i noticed that i don't get the page that gives me the option to choose between ntfs or fat32... yet it continues, and says windows is installed... but when it reboots, it goes directly to my mac-osx
im not too good with computers but i've managed to find a lot of threads that were talking about my problem but none of them could really correct the problem.
some people said that it might be the version of windows that could be the source of the problem.
i have Windows Xp Corporate version. might that be the problem?
View 3 Replies
View Related
Oct 27, 2007
I was using my external hard drive with my mac and its formatted in the MAC HF(something like that) file system. I would like to format that external hard drive such that the file system is either NTFS or FAT32 so that I can use it on my windows partition running on boot camp. I am asking this question since I am planning to get a new HD for my mac and use the old one with windows.
View 10 Replies
View Related
Aug 6, 2010
Simply looking for an application, preferably free, that will allow me to write to my NTFS external HD. I had this external as FAT32 before which was not problematic until I started downloading 720 and 1080 .mkv movies that were larger than 4gb. So I reformatted to NTFS which will accept files larger than 4gb but realized that OSX don't be got the ability to write to NTFS.
View 6 Replies
View Related
Mar 27, 2012
I receive my new iMac (27', 16GB Ram, 3.4Ghz i7, 2GB Graphic card). Time machine restore was perfect. Then I ran Bootcamp Partition. Then I have launched win 7 DVD install, Quick Format in NTFS and restore from win7 backup. Well Win 7 run well (with bootcamp 4.0). I can restart under Mac OS X Lion. And there the BootCamp Volume appears empty as a FAT32 Volume. I have tried to unmount it, then try a mount_ntfs (i/o error message in terminal). So annoying with that because I can't browse my NTFS Vootcamp and can't launch my BootCamp Win 7 through Vmware fusion (4)!
Info:
iMac, Other OS, Windows 2008 R2
View 3 Replies
View Related
Feb 27, 2009
I'm going to buy my first Macbook this weekend and I'm trying to get myself ready so that I don't have to waste precious playing time on stuff like this I have an external hard drive filled with music, videos and files. I would like to keep using my drive on my mac to access my files and save backups etc. The hard drive is in NTFS format and from what I understand the mac will be able to read but not write to it - which isn't what I want. Ideally I don't want to lose the content on the drive, but if I have to I could slowly copy it all onto dvds. If possible I also want the drive to be compatible with Windows so I can plug it into parents/friends/uni's computers and still be able to view/add content on rare occasions. What format should the drive be and how do I do that? (I think I can manage to do it once someone points me in the right direction)
View 1 Replies
View Related
Mar 19, 2010
i have a 500GB HDD which has two 250GB partitions, one which is working for time machine, and another one for storage, that one for storage is NTFS, so i can just read but not write files, which is very annoying.
Can i just reformat that partition without loosing my time machine files? I already copied the Storage files to my internal HDD, also which is the best format? I want to be able to read/write stuff both on PC and Mac
Is there a way to copy my Time Machine files to my computer, reformat that partition too to FAT32 and pass them back?
View 4 Replies
View Related
Feb 15, 2011
I have an external multimedia disk currently formated in NTFS microsoft format. I'd like to be able to copy content to it from my Mac and a PC so I thought to format it in FAT 32. can anyone tell me if there is a size limit to FAT32. what are the major limitations of FAT 32 vs NTFS
Information:
MACBOOK
Mac OS X (10.5.4)
View -1 Replies
View Related
Aug 21, 2010
Was just wondering that are there any backup apps similar to Carbon Copy Cloner and SuperDuper that support formats others than HFS+. I did search via MRoogle but couldn't find anything. I would just like to have an automated backup of my home folder that can be accessed with a PC as well
View 6 Replies
View Related
Apr 14, 2012
I have two external hard disks, one formatted as FAT32 and another formatted as NTFS .Both cannot be seen in Finder when plug in. Only another one formatted MAC OS extended can. how to dispay my drive in the Finder (I don't want to reformat it as I have lot of contents and need to be read in my window computer.)Im running Mac OS 10.7.3 on my iMAC
Info:iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 16, 2009
I am in need of a data recovery app that can recover data off a Fat32 drive and save the recovered data to a NTFS drive (I use NTFS-3G). I have PhotoRec but can't seem to navigate to my NTFS external to save the data (the only drive big enough to save the data too is my girlfriend's 500GB external and it is NTFS).
Any tips to getting photorec to navigate to the drive (I am pulling from one external to another). Photorec sees the one I want to save too I just can't get it to select it. Also if there are any other programs yall recommend, I will give them a shot.
View 4 Replies
View Related
Apr 14, 2009
Does anyone know a software to convert NTFS to HFS+? I had one but don't remember the name of it.
Edit: NM, I got it. It's TransMac.
View 1 Replies
View Related
Nov 8, 2009
I got an external drive (NTFS). I want to use it for mac. Do I just partition it into 2 partitions? Or do I need to Erase it into one Mac Journalled volume first? I am erasing it now, it says its gonna take 12 hours. Or is erasing the first step. And then partitioning is the second step. Two distinct processes/operations, right? (I basically want two partitions on it, both OSX journalled. One for super super, and the other to maybe try sandbox or just storage or maybe time machine.
View 2 Replies
View Related
Oct 12, 2009
I need to recover some deleted pictures from my friends PC. Is there any program that will be able to read the NTFS formatted HDD?
View 4 Replies
View Related
Jun 11, 2010
This is a thread for anyone who is experiencing a large slowdown and/or intermittent 10-60 second freezes on Mac OSX Snow Leopard, where the freezes are completely unrelated to anything you're doing, any app you're using, or whether the system is under heavy or little use. I found the issue stems from the use of Mac Fuse (with NTFS-3G installed) and/or Paragon NTFS for Mac OSX, the combination of these 2 apps essentially doing the same job (NTFS write support), conflicts and causes the hard drive to be under constant (although very little) use, which can randomly cause 30-60 second freezes. If anyone is experiencing these same freezes, uninstall either one app or the other, or both, and that might help remedy the situation. EDIT: updated because I didn't specifically mention which macFUSE plugin I had installed....
View 5 Replies
View Related
Aug 8, 2009
I have 2 external HDDs that I am sharing with other PCs/Macs over the network. Interestingly, when I look up the info for each volume, only one shows as NTFS-3G whereas the other one shows as just NTFS. And this NTFS volume is causing so much trouble. It doesn't wake up after it goes to sleep, and when I power-cycle it, the data I have put in previously is gone! It doesn't seem to save the data properly. Perhaps because it's just NTFS, not NTFS-3G, I cannot run "Disk Repair" from the Disk Utility app. The button is disabled whereas for other volumes, the button is enabled.
At one time, I had to connect it to a PC to run the disk repair and was able to recover some of the lost data. What the heck is going on? Howcome it is showing as NTFS opposed to NTFS-3G? Both HDDs were formatted from PCs as NTFS. Only difference is that the NTFS is 750GB one, and NTFS-3G one is just 300GB. Does NTFS-3G has size limit?
View 3 Replies
View Related
Aug 8, 2010
My Mac partition recently got corrupted to the point of needing a fresh install. I just starting installing my utilities again and downloaded the newest version of NTFS-3G. While doing this, I noticed that there was a "professional" version of NTFS-3G sold by Tuxera (who makes NTFS-3G). I tried to find information comparing the two, but can't; Even on their own website. Does anyone know what the major differences between them are? Is worth the $31 for a normal user (meaning someone who has a BootCamp partition, but doesn't always copy to and from it)?
View 21 Replies
View Related
Feb 6, 2009
I previously used NTFS-3G to write to my NTFS (Boot Camp) volume. Now, I would like to can it, and just use Apple's internal read-only NTFS stuff.. But the drive refuses to mount, if I disable or remove NTFS-3G.. If I try to mount it manually in Disk Utility, it just says "The disk could not be mounted. Try running First Aid".. I tried that, and it did not work (as expected). I have tried to create an empty file with TOUCH command in the root of my NTFS drive, called "ntfs-readonly". I have also tried to put that file in a directory called ".NTFS-3G" in the root. According to this site, it should tell NTFS-3G to mount that drive with Apples read-only driver. But this failed to work as well - getting the same error as above, when trying to mount it manually.
An interresting thing is, that when NTFS-3G is running, the format of the NTFS drive reads "Windows NT Filesystem (NTFS-3G)" - fine, that sounds logical. BUT.. When NTFS-3G is disabled, the format reads "MS-DOS (FAT32)".. Which, of course, is not true. Is Apples NTFS mounter broken on my system, maybe? If so, how can I fix that? I recall, that I removed NTFS-3G and Mac Fuse manually some time ago, using this site as guidance. That involved deleting the files it was using. I was very careful, but MAYBE I deleted one or more files, that Apples internal NTFS read-only driver needed... Can somebody perhaps assist me in some way? What can I try (apart from re-installing OS X using my Time Machine backup..)..?
View 1 Replies
View Related
Mar 16, 2010
Just started my forray into the whole Apple OSX life. Which app is better in your eyes?
View 10 Replies
View Related
Jul 31, 2009
I am looking for an OSX app which will backup an external Fat32 drive to another external Fat32 using Leopard machine.
My machine is bootcamp-ed to switch between OSX and XP for work. I keep the working files on an external Fat32 drive for maximum compatibility.
I have searched for a Mac app which will support Fat32 backup, but have not had any luck. IE -- Time Machine / Superduper do seem to properly read / write to Fat32.
Also, is there an app which can backup files from an external Mac Journalled drive to Fat32? This backup is just to make copies of files (like .mp3 and .doc) -- not a bootable backup of the applications folder. I have bootable backups of my primary OSX drive using Time Machine and Superduper on Mac drives.
I would prefer a OSX app for this. I tried mounting the backup drive to XP, but it does not see the drive. Therefore, I would prefer to not rely on a Windows app solution.
If it helps -- the backup drive (a 1TB WD MyBook) has four partitions: three Fat32 drives and one Mac Journalled (for a bootable Superduper backup). The working drive I want to back up is a 320G WD Passport. The 1TB runs through a Firewire 800 port and the 320G runs through a USB 2.0 port. Hope these items do not matter.
View 3 Replies
View Related
Dec 6, 2009
I formated a new 1.5TB WD hard drive, using the eSATA cable - in the FAT32 format so I can use it on my PC as well. (It was formatted on the MAC)
I was working on the Hard Drive via eSATA and the express card. Then the Hard Drive was accidentally unplugged. Subsequently, my MacBook Pro didn't like that and gave the warning message to properly eject ... too late! I restarted the MAC and it still won't recognize it - I've tried eSATA, USB, firewire- and nothing. The hard drive was all 3 connections. So, I tested the HD on a friend's MacBook Pro and the hard drive is recognized without any hesitation and it works fine. So, there is nothing wrong with the Hard Drive - its my MacBook that won't recognize it.
The HD won't even show up in disk utility of my MAC. I've restarted many many times and I've tried every port available.
View 3 Replies
View Related
Oct 2, 2007
Its a big 'ol drive that I've filled up with allot of important stuff and now its acting up. So none of my mac dick utilities will work on it. Should I try and use a disk utility from Virtual PC? Does any one know if that will work or if it will cause me more problems in the future?
Information:
Dual 2Ghz G5 and a 30gig video ipod
Mac OS X (10.4.10)
300GB WD, 80GB Lacie, DSL
View 2 Replies
View Related
Dec 25, 2008
I am using this guide to get a new HD into my PS3: [URL:...] It says that the HD I back my PS3 up to needs to be formatted to FAT32. I have an external HD that I use with my mac, its partitioned into 4 parts. I have one partition which I don't use which I want to back my PS3 onto. In Disk Utility I select that partition and I only get 4 option under the Erase tab, 4 different Mac OS Extended options.
View 2 Replies
View Related
Jun 20, 2009
What is the best way to make a FAT32 partition on a MacBook's internal hard drive? (I plan to use it to share files between OS X and Windows.) I did some research on this, and some people say to use Disk Utility, however, the only disk format available for me is "Mac OS Extended (Journaled)" and there are no FAT32 or FAT or MS-DOS options. Perhaps those options were taken out since then(?). One other person said to create the partition using Windows, which I think would work, but I'm a little worried about that because I've read that editing partitions outside of OS X can prevent Boot Camp from seeing the partitions.
I'm thinking that my best bet would be using Windows to shrink its own partition, then turning the resulting unformatted space into a FAT32 partition. Since I'm not touching the OS X partition I'm hoping there wouldn't be any problems. I just wanted to confirm whether or not that would work and/or what a better method would be.
View 2 Replies
View Related
Jun 24, 2009
i'm looking into buying a 500GB WD My Passport Studio Edition for my 17" MacBook Pro...
I've been reading online that people are having issues with the FAT32 Formatted Passports not being recognized with the FireWire but work fine via USB 2.0...
is there truth to this problem with the FireWire and is anyone else having such issues? I've been all over and see the problem, but no solution or results.
View 3 Replies
View Related
Nov 14, 2009
For some reason, my USB stick is no longer read on Windows machines. They say it must be formatted. It is formatted as FAT32 and my Mac can read and write to it fine. I seem to recall this happening around when Snow Leopard was released - instead of deleting all the data, I'd usually just re-format it. Is Snow Leopard's partitioning and formatting for FAT32 changed? This is really irritating as it pretty much renders my USB drive useless. As I said, works fine on my Mac (haven't been able to try any other Macs).
View 5 Replies
View Related
Jul 2, 2010
I have a macbook pro with an external harddrive formatted to MS-DOS FAT32 and want it to accept files bigger then 4gb (ie. HD Movies). Is there a way to change the individual movie files to be accepted by the Harddrive or do I have to reformat the harddrive completely?
If I do have to reformat my harddrive what format should i do so?
I want my external harddrive to be able to work on Windows and MacOS as well as accept files of any size (ie. over 4gb at least)
View 9 Replies
View Related
