OS X :: NTFS And NTFS 3G Volume - Doesn't Wake Up After Goes To Sleep
Aug 8, 2009
I have 2 external HDDs that I am sharing with other PCs/Macs over the network. Interestingly, when I look up the info for each volume, only one shows as NTFS-3G whereas the other one shows as just NTFS. And this NTFS volume is causing so much trouble. It doesn't wake up after it goes to sleep, and when I power-cycle it, the data I have put in previously is gone! It doesn't seem to save the data properly. Perhaps because it's just NTFS, not NTFS-3G, I cannot run "Disk Repair" from the Disk Utility app. The button is disabled whereas for other volumes, the button is enabled.
At one time, I had to connect it to a PC to run the disk repair and was able to recover some of the lost data. What the heck is going on? Howcome it is showing as NTFS opposed to NTFS-3G? Both HDDs were formatted from PCs as NTFS. Only difference is that the NTFS is 750GB one, and NTFS-3G one is just 300GB. Does NTFS-3G has size limit?
View 3 Replies
ADVERTISEMENT
Feb 6, 2009
I previously used NTFS-3G to write to my NTFS (Boot Camp) volume. Now, I would like to can it, and just use Apple's internal read-only NTFS stuff.. But the drive refuses to mount, if I disable or remove NTFS-3G.. If I try to mount it manually in Disk Utility, it just says "The disk could not be mounted. Try running First Aid".. I tried that, and it did not work (as expected). I have tried to create an empty file with TOUCH command in the root of my NTFS drive, called "ntfs-readonly". I have also tried to put that file in a directory called ".NTFS-3G" in the root. According to this site, it should tell NTFS-3G to mount that drive with Apples read-only driver. But this failed to work as well - getting the same error as above, when trying to mount it manually.
An interresting thing is, that when NTFS-3G is running, the format of the NTFS drive reads "Windows NT Filesystem (NTFS-3G)" - fine, that sounds logical. BUT.. When NTFS-3G is disabled, the format reads "MS-DOS (FAT32)".. Which, of course, is not true. Is Apples NTFS mounter broken on my system, maybe? If so, how can I fix that? I recall, that I removed NTFS-3G and Mac Fuse manually some time ago, using this site as guidance. That involved deleting the files it was using. I was very careful, but MAYBE I deleted one or more files, that Apples internal NTFS read-only driver needed... Can somebody perhaps assist me in some way? What can I try (apart from re-installing OS X using my Time Machine backup..)..?
View 1 Replies
View Related
Oct 12, 2009
I need to recover some deleted pictures from my friends PC. Is there any program that will be able to read the NTFS formatted HDD?
View 4 Replies
View Related
Jun 11, 2010
This is a thread for anyone who is experiencing a large slowdown and/or intermittent 10-60 second freezes on Mac OSX Snow Leopard, where the freezes are completely unrelated to anything you're doing, any app you're using, or whether the system is under heavy or little use. I found the issue stems from the use of Mac Fuse (with NTFS-3G installed) and/or Paragon NTFS for Mac OSX, the combination of these 2 apps essentially doing the same job (NTFS write support), conflicts and causes the hard drive to be under constant (although very little) use, which can randomly cause 30-60 second freezes. If anyone is experiencing these same freezes, uninstall either one app or the other, or both, and that might help remedy the situation. EDIT: updated because I didn't specifically mention which macFUSE plugin I had installed....
View 5 Replies
View Related
Aug 8, 2010
My Mac partition recently got corrupted to the point of needing a fresh install. I just starting installing my utilities again and downloaded the newest version of NTFS-3G. While doing this, I noticed that there was a "professional" version of NTFS-3G sold by Tuxera (who makes NTFS-3G). I tried to find information comparing the two, but can't; Even on their own website. Does anyone know what the major differences between them are? Is worth the $31 for a normal user (meaning someone who has a BootCamp partition, but doesn't always copy to and from it)?
View 21 Replies
View Related
Mar 16, 2010
Just started my forray into the whole Apple OSX life. Which app is better in your eyes?
View 10 Replies
View Related
Nov 8, 2009
I got an external drive (NTFS). I want to use it for mac. Do I just partition it into 2 partitions? Or do I need to Erase it into one Mac Journalled volume first? I am erasing it now, it says its gonna take 12 hours. Or is erasing the first step. And then partitioning is the second step. Two distinct processes/operations, right? (I basically want two partitions on it, both OSX journalled. One for super super, and the other to maybe try sandbox or just storage or maybe time machine.
View 2 Replies
View Related
Mar 30, 2010
I'm looking for a FREE data recovery app for os x to recover data from a NTFS hard drive. The hard has lost it's volume and will not mount and I've tried some other programs and I can see the files but I can't get them off because every program I've tried isn't free and won't let me copy them off. I've tried looking for one but I can't seem to find a good one. I just want to copy off the files and then I'll wipe the drive and fix the parition.
View 5 Replies
View Related
Dec 16, 2009
I have an Intel-based system that I have already repartitioned to give me 40GB for OSX. I am using a disk by the name of "iAKTOAS" or something like that. I have already gone through Disk Utility to try and format my unused partition, but it doesn't show up.
-How can I partition that "free" partition in Windows XP?
-What program should I use to do this, preferably free?
-How is the MBR going to work? How should I set the system up to allow me to choose from XP or OSX?
-What else do I need to know about OSX "Journaled", "Extended", or just "OSX"?
View 3 Replies
View Related
Aug 27, 2014
I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
Info:
MacBook Air, OS X Mavericks (10.9.4)
View 10 Replies
View Related
May 25, 2012
After I put the screen down, and the apple logo on MBP turns off, if I put it back up in like 5 seconds, it will recover from sleep, but anything after that, I put the screen back up, nothing happens. To make it work, I have to press the power button until the hard drive makes some kind of noise, and then it starts from boot (or from hibernation, like when battery goes out and you plug back in).Nothing is plugged in, same thing happens whether adapter is plugged in or not. Also, my MBP only shows 2gb ram instead of 4gb?? Some odd times, it shows 4gb, but most times, 2gb. It's a 13" 2010 C2D model. Same things happen when I boot into windows using bootcamp.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Dec 24, 2009
Why doesn't my MacBook Pro wake up from sleep sometimes ,I close the lid and when I come back and reopen it the screen doesn't turn back on.
View 4 Replies
View Related
Jul 25, 2010
My iMac goes to sleep and doesn't want to wake up. I have to restart the ugly white thing to continue using it.
View 9 Replies
View Related
Jun 26, 2012
It's been a while now that my mac pro 13" (july 2011 version with lion) either doesn't wake up from sleep (or appears so because the screen stays turned off) or it does but when asked to log back in, I type the password and press enter, and the colored wheel shows up and stops responding...not even gets to log in. I have to hard reset with the power button.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 4 Replies
View Related
Apr 6, 2009
I've heard that Macbook Pro's have this issue, but it seems like my white Macbook is exhibiting this sometimes. It's not a lot but I've encountered it about 3-5 times now. When I just close the lid, the little white light at the front should glow and unglow. It seems like the light stayed lit so when I open the lid the screen wouldn't turn on and there is no response and I would be forced to cold boot. My Macbook is up to date, with no problem in diagnostic.
View 3 Replies
View Related
Jul 1, 2012
My iMac becomes totally unresponsive after sleeping for any length of time. It will not wake from sleep, even if I connect a wired keyboard; and it will not shut down or restart until I reset the SMC by unplugging the comptuer from power for 15-30 seconds. I can restart the computer after resetting the SMC, but the same thing happens every time the computer goes to sleep.
I have also set the computer sleep slider to "never" and reset the PRAM. Although people have been complaining about this issue for months, Apple's Lion updates have not addressed this issue.
Info:
iMac, Mac OS X (10.7.4), 3.06MHz Core i3
View 2 Replies
View Related
Aug 24, 2014
I have brand new, mostly untouched, 13" rMBP running Mavericks (10.9.4) that crashes during sleep. If I close the lid and leave it for more than a few hours, I have to do a force shut down by holding the power button for a few seconds and turn it back on again.
I've already followed the advice of this article: OS X: When your Mac doesn't sleep or wake and have called Apple Support, who did nothing but read the article to me.
I have:
- reset the System Management Controller
- restored all defaults in Energy Saver preferences
- booted into Safe Mode to verify disk (unsure of whether or not this was effective at all)
In my Console, I am getting a line that says "com.apple.message.signature: Platform Failure"
According to this other thread - MB can't wake up from sleep anymore - it seems like it might be a hardware failure.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
May 24, 2010
I have a new mid 2010 Macbook Pro i7 only had it for 3 weeks, I used to be able to tap/swipe my trackpad to wake my computer from sleep but now its not responsive to it, though clicking it works and the other ways like pressing the keyboard works. Is the trackpad not meant to wake it up? i have also tried a SMC reset/PRAM reset and checking/unchecking trackpad settings no change.
View 13 Replies
View Related
Mar 3, 2012
Is it that there is just too much going on for the system, I have my HD encrypted.
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.3), HD encrypted
View 1 Replies
View Related
Aug 20, 2007
I want to do the copy of the files from the external NTFS drive to my new Mac.If anyone can confirm whether that is or is not possible?
View 24 Replies
View Related
Sep 14, 2010
What is the best way to read/write with NTFS partitions (internal and external drives)? I have MacFUSE already installed with virtual machine.
View 6 Replies
View Related
Nov 29, 2010
Most of my data is stored on a 1TB drive that is currently formatted as ntfs. Do I need to convert this to fat (or fat32?) in order to use it on both machines in the future.
View 2 Replies
View Related
Jan 4, 2008
I'm intending on buying an iMac in a few days, just waiting for Macworld to come and go.
My question is this. I currently have 3 external Hard Drives on my PC. 2 x 360GB and 1 x 500GB. These contain MP3's, Photos/Videos, FLAC (Uncompressed Audio) respectively. Each disc is probably around 2 thirds full. They are all in formatted to NTFS.
Is there anyway that I can convert them to FAT32 without losing the Data so that the iMac can Read and Write to them when I swap them over to the Mac? (and is this even a good idea as I understand that FAT32 is extremely inefficient with volumes of this size)
The only alternative I can think off is to copy everything from the disks to the internal mac drive, reformat the USB drive for the mac and then copy everything back..
View 3 Replies
View Related
Oct 13, 2009
I currently have a mac and a windows pc, and need to transfer files between these two computers.
My Harddisk was formatted to Mac OS Extended and can someone guide me how to format it to NTFS since Windows cant recognize my harddisk?
View 23 Replies
View Related
Mar 30, 2010
So I have several external Harddisk that I formatted with NTFS-3G via the Disk Utility App on my Mac. I worked with the HDDs for weeks on my Mac without a problem. And now I brought the Harddisks to a friend and none of them can be read by Windows XP?!
We tried on several Machines, none seem to be able to read the NTFS-3G formatted HDDs. They're also not broken since they still work the second I plug them back into my MacBook.
So did I do something wrong? I also can't find a NTFS-3G driver for Windows.
It would kinda defeat the purpose that Windows can't read NTFS-3G...
View 2 Replies
View Related
Apr 26, 2010
Alot of ppl uses third party software such as NTFS-3G and MacFuse but i also found some ppl who just tweak with the mac osx ( by entering some lines in Terminal) such as this guy in http://www.youtube.com/watch?v=9Q_BrBk5KsI
My question is do both methods have the same effects and which method is better?
Also, if i were to partition my hdd in mac( as i want to install win 7 on it ) will i get the mac HD AND the windows HD on the OSX desktop?
View 6 Replies
View Related
Apr 27, 2010
I sold my Sony Viao last week and copied all my important files on a 250 GB WD Mybook drive. Now the thing is formated in NTFS and I know that NTFS is a windows thing. I have some video/pictures/music and documents(excel/word) that I would like to move to my Macbook Pro which I will be buying next week. Whats the best way to do this? I think I have around 50-60 GBs that I need to move.
View 4 Replies
View Related
Jul 25, 2010
Is there a free software that I can download so that my Mac can write on my external NTFS drive? I've tried Tuxera NTFS but that has a 15 day trial. So what's my best option here?
View 2 Replies
View Related
Jun 7, 2012
I tried many times but used the trial version. Now I'm having a hard time transferring files to my external drive.
View 2 Replies
View Related
Oct 5, 2009
I am running a MAC pro with OSX 5.8 and I'm trying to read/write files that are on a NTFS windows share point. Th eshare point is on an IBM AS400 machine. My problem is this, I can connect to the share point via the "connect to server" apple-K command and I can see the files and folders on the share point.
Recently another windows user has created a folder on the share point with some excel files in it. From my Mac I can't see this folder, it doesn't appear in the finder. I have Parallels 3 (windows XP) installed on the mac as well and when I connect to the same share point I can see and use the new folder.
View 1 Replies
View Related
