get my fist MAC system for home, of course on a limited budget. What would be the minimum set-up (hardware + OS) to allow say 2 users to simultaneusly use Corel painter while the 3rd surfs the web. Also would like the capability to dual boot to Windows.
View 1 RepliesFor class evaluation purposes, I would like that one user could only establish one SSH connection o a OS X 10.4 server.
It linux I could mess with the /etc/security/limits.conf, but it does not seem available in OS X.
Also, in sysctl I could not see any suitable variable to set.
Info:
Xserve, Mac OS X (10.4.11)
The Airport Extreme is supposed to operate simultaneous 2.4GHz and 5GHz bands. I take that to mean they can both be run at the same time. If so, how do I set them up to operate simultaneously?
View 5 Replies View RelatedHOW MANY SIMULTANEOUS CONNECTION can I use from a Windows client (like xp/Seven) to a Mac server (Lion Server) using the VNC service? There is a limit? We have some developers that work for IOS and we would try to buy a Server Pro for all the users and our developers can use the server from remote.
Info:
Lion Server
I have tested the WAN to LAN speed and WAN to WiFi speed on Apple's latest Airport Extreme out of curiosity.
The test is done with two Unibody MacBook Pro; one connected to the WAN port, the other to LAN. The test was done over FTP with one of them set as server. A 85MB file was transferred
WiFi connection was draft-n, 5Ghz, Wide Channels.
I have the newest AirPort Extreme that transmits simultaneously in 2.4GHz and 5GHz. It's been great. My speeds have jumped 2-3x what they were before I upgraded to this router. Now, I'm getting 28-30MB per second download speeds. Before this I was getting 8-10MB per second.
But, I have a problem. My MBP connects great to the AirPort Extreme (802.11n at 2.4GHz or 5GHz). One PC desktop works great with the AirPort Extreme (via Ethernet). And, I have another PC laptop connecting at good speeds (802.11g). But, I have one other PC that sees and connects to the Airport Extreme signal (802.11g) but nothing happens. It's like a garden hose with very little to no water. The signal strength is very strong and, again, the computer DOES recognize the signal. It's an XP desktop (4 or 5 years old) with an 802.11g card inside.
Any thoughts as to why I have this problem with this one computer? It connected fine with my prior wireless router. It's a new problem.
By the way, the Airport Extreme is setup with all of the normal defaults and "automatic" settings, WPA2, etc. My cable provider is Comcast and the router gets it signal from a new modem. There are no other
Anyone have the new Airport Extreme? I have a question about the new features.
I'm interesting in picking one up because I've been looking for a good 802.11n router for awhile, and the simultaneous dual-band radios plus the guest networking feature are the real sellers for me. Both those features exist in part on other routers, but I'd have to put in a lot of work in a DD-WRT compatible router to get them both to work properly.
My question, though, is can both the dual-band radios and the guest networking feature be run simultaneously? It seems that from a hardware perspective, the easiest way to get a second network and SSID running would be to use the second radio, which precludes the dual-band feature. Does anyone have the new Airport Extreme yet? Can you run both at the same time?
Today when we started trying to add users to our server (we use it only for afp access at this time), we noticed that new users belonging to a group "storage" were unable to login from client machines via afp (clients both 10.7.2 and 10.6.8).
When we tried editing the users accounts to change which groups they belonged to, it would appear in workgroup (and server preferences) that the changes would take but there was still no access.
As a test case, we modified an existing user who had no issues logging in to belong to a diffenent group and have different sharepoint access. The changes looked good in workgroup and server prefs, but when the user logged in, he was only able to acces his old sharepoint and not the new one (and since his permissions to the old were removed, he shouldn't have access to that sharepoint).
Also, for some reason users cannot be deleted within workgroup manager any more. The login used was the diradmin account.
Info:
Mac mini, Mac OS X (10.6.8)
I am currently am MBA student and must create projects using power point/ keynote, very often. Many of the power points/ keynotes created by students are informative but lack the ability to hold an audience’s attention (boring). Since I have this wonderful Macbook pro, I would like to create a dynamic keynote presentation which would include clips of audio and video files (I already know about converting keynote to power point). The only problem is, the videos I want to use in the keynote presentation are not able to be manipulated in iMovie (due to their format), and if they where able to be manipulated in iMovie, I’m not sure that PC users would be able to properly view them.
What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users? If this is possible, can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files (including embedded audio) so that it can be viewed by both Lion and PC users? Preferably one that does not need access to the internet in order to convert the files ( I’m on the go allot and use an air card for internet access), but I will take it if this is the best option. If the app store does not have this type of application, is there a place that I can download a safe one?
Info:
MacBook Pro
I'm pretty sure this has been talked to death but I can't find the answer.
I'm looking for a bare minimum neoprene or otherwise sleeve for my 11.6 MBA.
No second pockets, no carry strap, It doesn't even need to close. I just want to slip it in and then put it in another bag that doesn't have a padded slot.
Ive got a friend that has a mac pro 2.66 quad core and it came stock with only 2gb of ram. He wants to order some today but is not sure how much to get. If getting it from OWC what would be the best bang for the buck? is there a point where more ram wont make that much difference?
oh and his has 4x512mb sticks, what are your opinions on not matching the sticks? (such as 1gb with 512mb)
With my new headphones (Sennheiser HD280-PRO) even the lowest volume is too high (even when using the extra levels using the option-key). It's just below the level where it'll be uncomfortable, but lower would still be preferred.
Does anyone know how I can get OS X to use a different scale? I have a MBP 4,1 with OS X 10.6.3.
I've got a 13" unibody MBP, 2.26 GHz Intel Core 2 Duo w/4 GB 1067 MHz DDR3 memory.
From a hardware standpoint, can I run FCP and not want to tear the room apart? I have an external monitor so that's not the issue...
I know that technically I could run the software, but would it be torturous? I'll be working with HD video.
Furthermore...best place ($$) to legitimately get a copy of the software? Also, if I need to upgrade my system what would you all reccomend? Again, money is obviously the issue here and I'm just starting to get my hands dirty with this aspect of production so I'm trying to ease into things.
I'm considering getting the new MacBook Air, and using it mainly as a Windows notebook. So I'm trying to figure out if I can get away with the lower-end 64GB configuration. What's the minimum size I need to give the Mac OSX partition, just so I can boot into it occasionally for bootcamp updates and other such housekeeping tasks?
View 21 Replies View RelatedSMCFanControl lets me set a higher minimum fan speed on my MacBook Pro (I like to keep it at about 3600rpm instead of 2000rpm minimum). Is there a way to do this with the MacBook Air? SMCFanControl doesn't seem to detect the MacBook Air properly. Essentially I want it to run at around 3600rpm and increase to 6200rpm as needed. It should never be running lower than 3600rpm.
View 4 Replies View RelatedI'm wondering if there is a way to reduce the minimum sound volume on osx. I have the feeling that the gap from mute (zero volume, not the "mute" key) to the first level is huge, like 0-25%, and then the 15 others increase only gradually, and I'd like to sorta "recalibrate" this...
If necessery, here are my machine's details :
MacBook Pro 15'' (Unibody)
Leopard up-to-date
I have a new mid-2009 iMac 24 inch 2.66GHz. I work in a quiet environment and most of the time the computer is idling along. iStat returns the following fan speeds:
CPU 1200
HDD 1600
ODD 800
Even when I drive the iMac a bit harder - 100% CPU for an hour and a half - the temps only rise as follows:
CPU 60 C
Northbridge 68 C
Power Supply 71 C
and the fan speeds do not increase.
I value silence, and it seems to be unnecessary for the fans to running at this speed when they are not needed most of the time - when the computer is not under any load. With the iMac everything is right in front of your face. I heard about iMac Fan Control and installed it, but there is no possibility to set lower-than-standard fan speeds, except for the HD which can be set to 1200 instead of 1600. However, the ODD minimum speed increases to 1000 from 800.
I had a problem recently which required me to stick my leopard disk in to fix permissions.
I'd like to have a usb stick available that I could use that to do this process instead so I thought of installing leopard on to the stick for this occasion, but is there a smarter way of doing this - short of dupeing (sp?) the OSX install dvd on to a stick?
So what is the minimum install size of a vanilla copy of OSX Snow leopard?
what are the minimum os requirements for macs?
Info:
MacBook Pro, Mac OS X (10.6.8)
In the future, I will be looking for a Media Server, namely a Mac. I want to use it to store all my iMovie projects - mainly iSight or DV format, very little HD, stream them to my Main Mac and also to a couple of Windows PCs (not mine), and maybe preview a smaller version (640*480 or 720*480). I am thinking that Mac OS X 10.3.9 or 10.4.11 will do. Especially as I use iMovie '06 and might use an older version of iTunes. I want to use an older PowerPC PowerMac to do this, can I get away with a G4 running at 400Mhz with 512 MB RAM, or do I need a faster G4/G5?
View 7 Replies View RelatedI'm in the process of setting up a new backup system at home, and I'm feeling rather annoyed right now. The setup I wanted was thus: 1TB drive connected to my Airport Extreme Base Station with three partitions: One for my desktop boot drive Time Machine backup, one for my laptop boot drive Time Machine backup, and one for a server data backup.
Now, since these backups don't need to be "deep"--it's basically catastrophic failure insurance more than "Uh oh, I deleted that last year" insurance--I figured maybe 10% more than the volume size of each would be plenty, since they're also nowhere near full.......................
Just downloaded and installed this app, been using it for a few hours, I am a fan. Just a quick question, it won't seem to let me set the minimum fan speed below 2000rpm (the standard level for the app), is this normal, I thought I remembered the apple default being lower?
15inch UNI MBP, 2.4 ghz, 2g ram, 250hd by the way
How to calculate the regular MacBook power consumption if it is left on lowest screen brightness for about 12 hours, plugged in, with just a browser running Gmail? The following is the System Profiler->Power Information that pertains to this topic:
Battery Information:
Model Information:
Serial Number:DP-xxxxxxx-xxxx-xxxx
Manufacturer:DP
Device name:xxxxxxx
Pack Lot Code:0002
PCB Lot Code:0000
Firmware Version:0110
Hardware Revision:0500
Cell Revision:0102
Charge Information:
Charge remaining (mAh):4831
Fully charged:Yes
Charging:No
Full charge capacity (mAh):4831
Health Information:
Cycle count:188
Condition:Good
Battery Installed:Yes
Amperage (mA):147
Voltage (mV):12604
System Power Settings:
AC Power:
System Sleep Timer (Minutes):0
Disk Sleep Timer (Minutes):10
Display Sleep Timer (Minutes):20
Automatic Restart On Power Loss:No
Wake On AC Change:No
Wake On Clamshell Open:Yes
Wake On LAN:Yes
Display Sleep Uses Dim:Yes
Battery Power:
System Sleep Timer (Minutes):5
Disk Sleep Timer (Minutes):10
Display Sleep Timer (Minutes):1
Wake On AC Change:No
Wake On Clamshell Open:Yes
Display Sleep Uses Dim:Yes
Reduce Brightness:Yes
Hardware Configuration:
UPS Installed:No
AC Charger Information:
Connected:Yes
Charging:No
What's up with this in the newest version of SMC that just came out today? The min now goes below the original 2500 RPM that the Apple engineer's decided on??
View 12 Replies View RelatedI want to defragment my hard drive because it's two years old, and I create and delete VERY large files every day.
What is an application that can effectively do this with minimum risk?
Is it possible to change the minimum amount of space we want TM to leave available on the backup disk? I assume no but couldn't see any recent answers to see if this has changed (or if there is some hidden setting change). What's the default space or percentage free TM will make sure is available?
I backup some macs directly to the TM volume (network via CCC) and want to make sure a minimum of 20GB or so remains available for those backups at any given time. The drive is 1TB and TM has filled up about 700GB of that with ongoing backups so far. TM runs hourly so pruning should happen before the need arises (the CCC backups are 2x/day). But I'd like to make sure there's a minimum available at all times.
Info:
Mac mini, Mac OS X (10.6.7)
I am trying to work in an image based website. The message I recieve when I try to get into the site: This image flow resource requires one of the following miminum browser versions: Internet explorer 6.0. The browser you are currently using is Apple-Mac Safari Version 5.0.
Info:
Mac Pro, Mac OS X (10.7.4)
I get this error on opening aperture 2:
So, How can I bypass this error?
(It will run on my PB G4 but it is too slow, This is my Hackintosh with GMA x4500mhd)
what is minimum internet speed required for viewing iTunes movies thru OSX 10.4.11 to a TV thru the apple TV device.? Is it viewed as streaming or from a hard disk in the apple TV device?
Info:
iMac, Mac OS X (10.4.11), from computer thru apple TV device
I have a MBP 13.3" w/ 4GB of RAM and an Intel G2 160GB SSD. I will need to install Windows 7 and one third-party application (not very large).
So I'm wondering, assuming I only need the OS install and the third-party application takes up minimal space, and I will not be installing anything other than whatever comes with the truckload of windows updates, what is the suggested partition size for Win7 (x64)?
Also, is there anything special I need to do (TRIM?) regarding my SSD?
