I'm trying to make a dvd. I have the videos on my computer and i want to put them on dvd to watch on the television. However, when i put one video on it a takes up the whole volume of the dvd...so there is no point to create a dvd if I can't add more then 1 video on it.
View 4 Replies
I couldn't find what I was looking for in MRoogle.
The thing I hate about iDVD (besides it taking so long to burn video DVDs on Mac) is that the themes are more than I need and take up valuable disc space.
1. Are there any iDVD themes that are simply a menu...no music, no video clip previews, no sappy backgrounds, etc?
2. Is there a free (or cheap) alternative to iDVD excluding Toast?
3. I'd be using .mov or .mp4 as my source video.
4. I have iDVD 7.0.4 and am using Snow Leopard. I really don't want to pay for iLife 11 as I never use Garage Band or iPhoto. iMovie kinda sucks too.
I need to burn a DVD to play home videos in a DVD player. Since Apple killed off iDVD, I've wasted over 2 hours trying to figure out how I can create such a DVD-video. Someone suggested "Burn" but Burn only handles .avi or .mpeg files and iMovie only exports .m4v files. So any software, for movie in iMovie, exported it successfully, converted it from .m4v to .avi or .mpeghas successfully burned it to a DVD-Video, played it in a DVD-video player, to achieve this?
View 4 Replies View RelatedI follow a lot of podcasts, many about the similar think. Is there a way to group the podcasts in the podcast page of iTunes?
View 1 Replies View RelatedI've only recently added release years to all my albums and now I sort by album by year, which is great. However, I'd like to make some smart playlists based on decades, and this is a problem for anything on some sort of anthology or greatest hits collection. For example, the Barenaked Ladies greatest hits CD was released in 2001.
If I tag the whole album as 2001, it sorts correctly, but the individual tracks from the 90's won't show up in the 90's smart playlist. The other option I can think of is to tag each individual track with the correct year, but then the album stops appearing in the right place chronologically within the BNL albums, since iTunes no longer knows it was released in 2001.
So my question is this: is there some way to do a sort of "Sort Year" or "Album Year" similar to "Sort Artist" or "Album Year"?
And while I'm at it, I'm sure there's no way, but it seems like it'd be cool to somehow tie a track to two different albums. Previously, if I had a greatest hits and some original albums, I would erase any duplicates from the greatest hits and only keep them on the original album. However, since the release of iTunes 8 I use a more album-based approach to my music. I use grid view with shuffle off by default, and often just click "Play Album". But if I do that for a greatest hits comp, it of course won't play the tracks that I've deleted from it. So I have to keep two copies of the same recording for two different albums. It'd be cool if there was some way to tie one track to both albums to avoid dupes. But again, I'm pretty sure this'll never happen.
we have a macbook pro running Leopard. My wife and I have separate user accounts on the single laptop and keep the music in one central Public folder (both or our iTunes are pointed to this public folder). For some reason, my wife is unable to make any changes to song info (album art, change genre, etc.). However, she can play the music, update her Nano, import music, etc. The only thing she can't do is make changes to the song info. This isn't an issue with my account because I am the primary user account on the computer. We are both set up as Admin and I have assigned Read/Write privileges to all files. Does anyone have any idea what the issue could be? Tech support/program specialist has no idea.
View 7 Replies View RelatedI cant get the chapters that I made in iMovie 09 to transpose into iDvd.....should they?
View 6 Replies View RelatedAfter installing the latest update for iDVD- I can't open the program! I tried the "fix" posted on the Apple site- no luck. It worked fine before the latest update.
View 3 Replies View RelatedI've read numerous posts here saying that its possible to use AVI files in iDVD to make a DVD, but I can't figure out how to do it. I have a series of AVI files that I want to burn to a DVD that will work on any DVD player but iDVD won't even let me preview them (I just get a blank black screen)...
I have VisualHub, but I'm not sure what to do...
I've done a few (well a lot) of DVDs now with iDVD using avi files on my hard disk with a view to either giving as presents or watching with the family on TV.
We do not want to hover around my laptop to watch a movie In about 90% of these iDVD created DVDs I get an error message from iDVD that there was a problem during encoding and if we try to watch them throgh the TV/DVD player then the film just stops about 75% of the way through.
I have a project already started in iDVD. When I try to add a movie to it, it says that my iMovie project can not be used yet because it hasn't been prepared for sharing. It tells me to go to iMovie - Share - Media Browser. When I do that and try to click on Share, nothing is available to be used.
View 2 Replies View Relatedi cant open idvd for some reason. it keeps freezing and i have to force quit it. what can i do? i was also wondering about just deleting it and downloading it again but where can i download it from?
i have tried opening it with an idvd project but it still freezes.
I have iMovie 2.1.2 on a Mac G4 with a superdrive burner. I've captured video from my mini-dv camcorder and now I want to put it on DVD to be played on any DVD player.
I've tried a few of the "expert" settings to export it, but none do the trick as far as producing playable DVD's. I have toast titanium 5 and I don't have Quicktime Pro. I also do not have iDVD.
I have Final Cut Pro on this computer, but have no idea how to use it.
Is there a simple way to to export directly from iMovie onto a playable DVD, or do I need something else?
Is there any beneficial gain from one format over the other? Is one more well designed for widescreen?
View 7 Replies View RelatedI created a movie using IDVD, only I apparently don't have the kind of drive needed to burn dvds, so my questions (which is probably a stupid one) is how do I put it onto a dvd? I know there are external burners, but I rather not buy one. Are there any types of services that do that? I know there are ones for tapes to dvds, but this is already on my computer.. Can I save it and do it through a pc? Would I have to convert the file?
View 2 Replies View RelatedWhenever I try to write an .avi (or .mov) movie with iDVd onto DVD, it says: 'content reach maximum duration, pls remove some content' for movies over 700MB. That's without adding chapter markers etc...
I've tried using MPeg Streamclip and Prism to convert them to smaller sizes, but without any luck, they just come out bigger.
so i have some bike racing videos that im trying to burn using iDVD but the files are a little to large for single layer. the files are varying in size from 1.1-1.6 gig in AVI video format. when i just drag one of the files into a project its says its to large and when opening up project manger its been expanded to 6+ gigs and wont fit. so what can i do besides burning to dual layer dvd's, what program do i need or perhaps already have that can compress the video enough so that once dropped into iDVD it will fit on a single layer dvd. also am i going to be dropping the quality of the video so low that its not going to look good?
View 5 Replies View RelatedI'm creating a dvd of some of the motion graphics our studio has done. I have them set up to play automatically when the dvd is loaded and to play in a loop. But, if for some reason a client were to hit the menu button - how do I set it up with a button for them to be able to play the movies again?
View 3 Replies View RelatedI want my DVDs to auto start with the main menu when inserted into a DVD player.Do I do this by going to the "MAP" in iDVD, clicking on the MAIN MENU, doing a "CMD i", and ticking both "Intro" and "Outro" under the "Background" heading?
View 2 Replies View RelatedIm getting an error thats stopping the Burn process in iDVD ...
it says Error during rendering/encoding
I have several seasons of a TV show downloaded to my MacBook Pro and I'd like to burn the content onto a blank DVD. I'm still new to Mac so I didn't know what applications could be used to do this. I thought iDVD could do it, so I when I inserted the blank DVD, I (stupidly) made it my default to have iDVD open when I put a blank DVD in. I found that it didn't work in iDVD so I'd like to just do it with Finder... How do I change my default setting so I can do it with Finder instead?
View 3 Replies View RelatedI have a 2GB m4v file that I wanted to use iDVD to create a movie for. But even taking it off of Best Performance and instead using High Quality, the movie is too large to be burned. It's showing it as a 4.81 GB project.
I'll admit my ignorance here...what gives? How does a 2GB file grow that large when being encoded as a DVD?
Any movie that I play that was burned in iDVD starts playing the movie from the beginning. What do i have to do in iDVD to get the movie to start at the menu?
View 1 Replies View Relatedi have a bunch of WMV videos that i need to convert to use with iDVD, but i can't find a good converter that will keep quality the same without making the file much bigger. QT X made a HD movie go from 5 GB up to 8 GB
View 8 Replies View RelatedI'm wondering if anybody can give me a hand. I am missing all the iDVD 3,4, and Old themes in iDVD 5.
I found this support article: [URL]
I've been trying for a few days now to get iDVD to save a disk image to my computer hard drive (since my Superdrive isn't here yet), but every time it'll crash at some random part of the encoding. The last time I tried it crashed within a few seconds, but last time it had encoded one of the three videos in my project before it crashed. It just "unexpectedly quits".
I'm an oldie so not very computer savvy, and a newbie here, so forgive me if this is the wrong place to post, or the topic has been dealt with before......
I have a macbook with 2.4ghz intel duo processor, 2 gigs of ram and a 150gig hard drive ( 50 gigs free ).
I've been downloading some free movies for the kids and burning copies with idvd. Trouble is it take 3-4 hours to burn each disk. The original files are .avi and range around 700mb.
I use the magicidvd option in idvd, as it seems the most straight forward. I drag and drop the avi into the movie box, but usually get a message saying the project is too big and I have to change settings in project info. Not fully sure why this is but I find setting the quality to 'professional' ( I think.....disc burning at present so can't open the menu, ) allows me to continue.
My questions are - Am I causing idvd to take longer by the method I've outlined above?
Is there a way to speed up the burn time? I would prefer not to have to buy some other software but am open to suggestions. If I could reduce the burn time with idvd to a couple of hours that would be fine.
I edited a video in FCP and exported it as a quicktime. The resulting file is a little over an hour, about 13gb in size, and has 14 chapters. The quicktime movie plays perfectly. When I build the DVD in iDVD it works perfectly. However, once it's burned I lose the audio in the middle of the 13th chapter until the end. I've deleted preferences, re-exported the quicktime, created new DVD projects, used an older template (I'm now using a version 7 template).... I'm not sure what's going on!
View 2 Replies View RelatedI just finished an iDVD project and saved it with the default file extension of .dvdproj.
I want to send this to someone with a Windows PC for them to view, but I do not want to burn it onto a disc because I need to send it overseas and it would take a considerably long time.
Is there any way I can convert the iDVD project to another file extension so I can email it to this person? Or, if I go back into the project is there a way to just save it under a more common file extension?
I'm really hoping someone can bail me out here. I'm trying to add sound in the background of a iDVD 7 menu, and it's driving me crazy. I've tried dragging the audio file from the media pane to the dvd menu, to the inspector window and to the menu drop box several times (just like the manual instructs) and it won't work. It doesn't play back or burn with the sound in the menu.
View 5 Replies View Related
