i cant open idvd for some reason. it keeps freezing and i have to force quit it. what can i do? i was also wondering about just deleting it and downloading it again but where can i download it from?
i have tried opening it with an idvd project but it still freezes.
I recently went all out for this girl and ended up having to make a Dual Layer dvd. After it went through all the stages of burning up to mixing I was met with this prompt and the dvd ejected. I slid the dvd back in and it stopped making noises after a few seconds. I wait until the time ran down to "about one minute" and then it froze for about three minutes until I got fed up and hit cancel. I can't figure out why this isn't working but I am pretty certain the DVD's are now unusable. The movie is just under the size for a DLDVD (7.21) but yeah.
I had a similar issue with itunes when burning CDs only when I reinserted the CD I successfully burned the music. If the trick is a full reinstall then please advise on how to not loose any data (I use time machine). Well I gave it another Go with a different movie that had just 1 menu with a filled drop zone and custom music and got this error (below). So I am going to copy my pref files and then delete the originals to see if that turns out.
So I went to start up iDVD today, and it won't even launch. Nothing. I click it, it just says "iDVD quit unexpectedly" every single time.
View 10 Replies View RelatedI couldn't find what I was looking for in MRoogle.
The thing I hate about iDVD (besides it taking so long to burn video DVDs on Mac) is that the themes are more than I need and take up valuable disc space.
1. Are there any iDVD themes that are simply a menu...no music, no video clip previews, no sappy backgrounds, etc?
2. Is there a free (or cheap) alternative to iDVD excluding Toast?
3. I'd be using .mov or .mp4 as my source video.
4. I have iDVD 7.0.4 and am using Snow Leopard. I really don't want to pay for iLife 11 as I never use Garage Band or iPhoto. iMovie kinda sucks too.
I just got a new iMac pre loaded with Lion.I had iLife 08 on my old 2008 MacBook Pro. I did a custom install with the iLife disk and only installed iDVD. It placed it in the application folder but when i try to open it i get an error message saying I cant use this version on MAC OS X. Then it says i have version 7, which i thought was the latest version. Is it possible to have idvd on this iMac?
Info:iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I have just copied a DVD project from my G5 Powermac to G4 iBook over my Airport network. The project does not open on the iBook (I think because the project was made on iDVD v6.03, and the iBook runs, or at least ran an earlier version.) I am trying to upgrade to 6.03 but so far to no effect. Now the project will no longer open on the G5 as it puts up the following message - Project locked by other user. The project wotton is locked by the user alexrice (user ID 501): 2007-10-15 14:31:14 +0100.
The project can't be opened at this time. - I have quit iDVD on the iBook and shut it down. The user id 'alexrice' is the previous owner of the iBook. Due to pressure of work, and some useful software still on the iBook, I had not got around to reformatting the harddrive and giving it a new identity. How can I regain control of my project on the G5?
Just upgraded to leapard and My applications,(safari,idvd) wont open.They bounce but says safiri unexpectedly quit
View 10 Replies View Relatedhow do i open idvd movies i made with new iMac 10.7.2
View 10 Replies View Relatedcannot get version of IDVD or open preferences - menu isdimmed
Info:
iMac
After installing the latest update for iDVD- I can't open the program! I tried the "fix" posted on the Apple site- no luck. It worked fine before the latest update.
View 3 Replies View RelatedI have a brand new macbook pro that I bought about 4 months ago. I am running snow leopard and out of the blue one day my computer gave me the spinning wheel and it went on for so long I had to power off my notebook by holding down the power. When I turned it back on I was stuck on the apple screen and I couldn't get passed it. So, I did a clean install and just moved all of my personal files and folders that my computer backed up to their original location.
After doing all of this and being up and running again I noticed when I try to access a personal folder on my system that contains images (jpegs, pngs) and some videos and psd files that my computer starts freezing up again and spinning and I have to power it off to get it to stop. I have resorted my permissions and ran Onyx once a week since this has happened and the folder is still giving me issues. I need to access this folder asap.
I am not able to open the apps on my Macbook Pro OS X 10.9.4, they just bounce. Activity Monitor gets so frozen I cannot find out what the hold up is. Screen freezes in some of the system preferences as well - Users, Parent Controls Accessibility. I do not have a disk, no disk drive to reinstall.
Info:
MacBook Pro, OS X Mavericks (10.9.4), no disk drive
My mac is freezing all the time. I can't have more than three programs open at the same time, like forefox, word and spotify. If I do that, it crashes and have to turn it off with the power button. I have some big programs on it, like all the Adobe programs. The mac is just over a year old. It have a 2.5 GHz Intel Core i5 processor, and have 4 GB 1600 MHz DDR 3 memory, also running iOS 10.9.4. I have 388,82 GB available of 499,25 GB.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I just had a few questions for the people out there who do a little light gaming on their Air. Yes I know it's not a gaming laptop of course. My question is has any one experienced choking or freezing with light games such as Open Arena and Warsow. Both of these games can easily play on a old PIII with 128MB of RAM. They both play smooth as hell for about 15-20 minutes and then out of no where it's starts choking every minute. I've kept an eye on the heat and CPU usage which are both fine.
View 2 Replies View RelatedAs I was passing around a shop where they sold MBP's of all sizes, I tried them out. Amazingly, every single one of them seemed to freeze when I opened iPhoto, for not a short time. Am I not understanding something about it or is it just freezing?
View 5 Replies View RelatedI have a macbook air and everything was working fine until all of a sudden my computer froze. I then rebooted my computer by holding down the power key because it would not allow me to open or close any programs. After i rebooted whenever i open safari, itunes, or ichat the computer freezes. i don't know what is going on because firefox and other programs seem to be working fine but certrain programs i open freezes up the computer. the dock stops working and the clock does not even run. i am able to move the mouse around but i can not click and open or close anything.
Info:
MacBook Air, Mac OS X (10.6.8)
I have some problems for my Imac. I don't know why when I open my browsers and some program keep crashing and freezing up.
Info:
iMac, Mac OS X (10.7.3)
I've read numerous posts here saying that its possible to use AVI files in iDVD to make a DVD, but I can't figure out how to do it. I have a series of AVI files that I want to burn to a DVD that will work on any DVD player but iDVD won't even let me preview them (I just get a blank black screen)...
I have VisualHub, but I'm not sure what to do...
I've done a few (well a lot) of DVDs now with iDVD using avi files on my hard disk with a view to either giving as presents or watching with the family on TV.
We do not want to hover around my laptop to watch a movie In about 90% of these iDVD created DVDs I get an error message from iDVD that there was a problem during encoding and if we try to watch them throgh the TV/DVD player then the film just stops about 75% of the way through.
I have a project already started in iDVD. When I try to add a movie to it, it says that my iMovie project can not be used yet because it hasn't been prepared for sharing. It tells me to go to iMovie - Share - Media Browser. When I do that and try to click on Share, nothing is available to be used.
View 2 Replies View RelatedI have iMovie 2.1.2 on a Mac G4 with a superdrive burner. I've captured video from my mini-dv camcorder and now I want to put it on DVD to be played on any DVD player.
I've tried a few of the "expert" settings to export it, but none do the trick as far as producing playable DVD's. I have toast titanium 5 and I don't have Quicktime Pro. I also do not have iDVD.
I have Final Cut Pro on this computer, but have no idea how to use it.
Is there a simple way to to export directly from iMovie onto a playable DVD, or do I need something else?
Is there any beneficial gain from one format over the other? Is one more well designed for widescreen?
View 7 Replies View RelatedI created a movie using IDVD, only I apparently don't have the kind of drive needed to burn dvds, so my questions (which is probably a stupid one) is how do I put it onto a dvd? I know there are external burners, but I rather not buy one. Are there any types of services that do that? I know there are ones for tapes to dvds, but this is already on my computer.. Can I save it and do it through a pc? Would I have to convert the file?
View 2 Replies View RelatedWhenever I try to write an .avi (or .mov) movie with iDVd onto DVD, it says: 'content reach maximum duration, pls remove some content' for movies over 700MB. That's without adding chapter markers etc...
I've tried using MPeg Streamclip and Prism to convert them to smaller sizes, but without any luck, they just come out bigger.
so i have some bike racing videos that im trying to burn using iDVD but the files are a little to large for single layer. the files are varying in size from 1.1-1.6 gig in AVI video format. when i just drag one of the files into a project its says its to large and when opening up project manger its been expanded to 6+ gigs and wont fit. so what can i do besides burning to dual layer dvd's, what program do i need or perhaps already have that can compress the video enough so that once dropped into iDVD it will fit on a single layer dvd. also am i going to be dropping the quality of the video so low that its not going to look good?
View 5 Replies View RelatedI'm creating a dvd of some of the motion graphics our studio has done. I have them set up to play automatically when the dvd is loaded and to play in a loop. But, if for some reason a client were to hit the menu button - how do I set it up with a button for them to be able to play the movies again?
View 3 Replies View RelatedI want my DVDs to auto start with the main menu when inserted into a DVD player.Do I do this by going to the "MAP" in iDVD, clicking on the MAIN MENU, doing a "CMD i", and ticking both "Intro" and "Outro" under the "Background" heading?
View 2 Replies View RelatedIm getting an error thats stopping the Burn process in iDVD ...
it says Error during rendering/encoding
I have several seasons of a TV show downloaded to my MacBook Pro and I'd like to burn the content onto a blank DVD. I'm still new to Mac so I didn't know what applications could be used to do this. I thought iDVD could do it, so I when I inserted the blank DVD, I (stupidly) made it my default to have iDVD open when I put a blank DVD in. I found that it didn't work in iDVD so I'd like to just do it with Finder... How do I change my default setting so I can do it with Finder instead?
View 3 Replies View RelatedI'm trying to make a dvd. I have the videos on my computer and i want to put them on dvd to watch on the television. However, when i put one video on it a takes up the whole volume of the dvd...so there is no point to create a dvd if I can't add more then 1 video on it.
View 4 Replies View Related