My hard drive crashed and corrupted some of my iMovie MOVs. When launching iMovie, I get a series of alerts (attached image). I'm trying to find what is making iMovie look for these files so I can clear out the reference. I tried searching for the file name and nothing comes up. I already know the file is missing, I'd just like iMove to stop looking for it.
View 2 RepliesI recently lost access to my Seagate eSATA HD after my Mac froze up and I had to do a hard shut down of both the Mac and my eSATA drive. When plugged in, OSX says I must initialize the disk before use (Windows says the same thing, but uses the word "format"). I figured out the drive is now in RAW format. I found a nifty little program called Recover My Files, (which cost a cool $69.95, far less than professional data recovery services) and ran a scan on my drive. It found what appears to be all of my files, but it doesn't look quite like what it did on the drive. Several top level directories are gone, and their content folders and files just spread out in the list.
All of this is OK by me, but when I try to save the files to another location, the software says my selected files take up 2.43 TB of space to save! The eSATA drive itself was only a 500 GB hard drive, so I don't know how it could find 2.43 TB to save. And I had only used around 350 GB of space on the drive. I did go through and found it had several duplicates for many of the files, that looked like maybe older versions or temp versions (with a ~ in font of the file name). I'm not sure how all these files could fit on that drive, but maybe I am misunderstanding something. Anyhow, I want just to save the correct files. A) I don't have space for all that stuff, my max to copy to is 500 GB (minus used space), and B) I don't want to have to sort through all of those files to get the one's I need (assuming there are tons of dupes in there).
My computer had frozen up so I had to restart it by holding down the power button. After I had done this, I kept getting a recurring kernel panic error. I had taken my MacBook the Apple Store and the tech who looked at it said that my hard drive was no longer good and that I would either have to replace it or purchase a new laptop. Regardless of whether I replace my hard drive or just purchase a new laptop, would there be any way to get my data that I lost off my old hard drive. I have some stuff backed up, but not recent data.
Info:
MacBook
My trusty 6 year old mac book crashed. Took it to apple, they couldn't recover. Purchased new 15 mac book pro with 1TB. drive. Removed my HD from the old mac book and trying to transfer files via sata cable to USB directly to my new mac. Been successful with lots of files. Problem is, new mac shows old file icons from Applications, library, users, etc. but not contents. I tried copying entire hard drive... Wont work.
Then went into users, from my main folder with most of my saved stuff. The largest two folders I want to recover is the Documents folder and the Images folder. I cant open and see the files inside because for over 24 hours now it has been showing "Preparing to copy files". When I went to the images folder after about 6 hours it went from preparing, to copying with estimated time of 6 days to complete. If I could see the contents in the folders, I could simply just transfer the main Items needed?
Info:
MacBook Pro
My friends iBook hard drive has crashed and I'm in the process of replacing it. However, he had a lot of important data on that hard drive that he needs recovered. Is there any software that you can recommend (for Windows or OS X) that will recover data from corrupt/bad hard drives? I have software for NTFS/FAT32 but don't know of any good ones for HFS.
View 14 Replies View RelatedDisk Utility Crashed whilst creating a Partition, and I now have ~100GB missing, which was the amount I had allocated to the new partition.
The new partition didn't get created, and I now have 100GB missing from the Hard drive. I have a 1TB hard drive, and when I go to Disk Utility, it says: Capacity : 999.35 GB (999,345,127,424 Bytes)Available : 586.1 GB (586,103,844,864 Bytes)Used : 310.52 GB (310,524,317,696 Bytes)
Which adds up to about ~900GB.
I tried Repairing Disk in Disk Utility, booting into Recovery Mode and Repairing Disk there, but neither made a difference.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.3)
My hard drive crashed and could not be recovered without spending about $1500. (according to the guys at the local Apple certified store) We had quite a bit of music on it but not enough to justify spending that kind of money. Is there a record of the music we purchased and some way to re-download that music to our new hard drive without re-buying all of it?
View 1 Replies View Relatedis it possible to recover data from a crashed Mac hard disk on a windows platform.
View 5 Replies View RelatedSo unfortunately, the hard drive on my 2005 G5 crashed, atleast that's my guess. All it does is click when I attempt to turn it on. I'm fairly good with computers, but when it comes to fixing one - I hand it off to someone with a little more knowledge.
I have two hard drives in the computer - one that's got the OS installed (factory 150GB), and another I use for saving videos, pictures, music, etc (750GB). Now, I'm assuming that because the computer doesn't boot up, that the hard drive with the OS is the one that crashed? Is that a safe assumption?
Secondly, is it possible to recover the application files and other data that's been stored on the crashed drive? If so, how much should I expect to pay? Is it something a local 'work from the home' computer tech could do? The reason I ask is because craigslist is full of guys willing to work on the computer for a decent price.
I have been trying to add music to a movie in iMovie. However, when I click the music button, it just presses and releases, and no music list appears. It used to, but now it doesn't. So no way to add music.
Also, after doing the most basic things, such as creating one slide with just text, iMovie decides to crash, and the spinning colour wheel appears.
Both of these issues have only recently started happening. It is running on the latest 2.4GHz iMac with 3GB RAM, and only safari and messenger running in the background. It is very annoying, and I don't know how to resolve it.
I just had my first Hard Drive crash on me . When I turn it on it makes a clicking sound for a few and then nothing happens. Its a Western Digital 500gb HD. I was wondering two things. 1) How can I get my stuff off the HD and 2) What's the best HD to get that wont give me any problems. I want to get a 1tb or 2tb HD.
View 15 Replies View RelatedI recently bought a 160GB external hard drive, and decided to transfer my iTunes music to it. I followed the instructions in the Help section of the iTunes program. The first time, I mistakenly created an empty "iTunes" folder and put an "iTunes music" folder inside, where i proceeded to copy the files. I had already set the defult location of the library to my F: drive, my external hard drive. However, the original location of the files stayed in iTunes. Again, following the advice of the iTunes program, I deleted the original folders, and I dragged the new iTunes music folder into the window - at which point i had TWO copies of each file - the first one with an exclamation beside it (original file missing) and the second being my new copies.
View 1 Replies View RelatedI swapped out my stock 160GB HDD for a 500GB WD HDD a year ago and put the old HDD into an enclosure. I guess I didn't screw it in tight enough and after jostling around a move or two, I just plugged it in to clear the clicking sound of a crashed drive. I can't even mount it onto my computer, so I pretty sure it's gone. My question is: I was about to take it to Best Buy to put in their electronic recycling bin, when I wondered if whatever data that was on there is secure, and if there's another step I should be taking before disposing of it properly.
View 2 Replies View RelatedMy hard drive crashed.
Info:MacBookPro
I have been trying to move my old TimeMachine data to a new, larger hard drive. A very helpful member of another forum suggested I use the Disk Utility "Restore" utility, restoring my TimeMachine data from the old disk to a new disk. For some reason this will not work for me.
View 21 Replies View RelatedMy 500GB external hard drive (Hitachi DeskStar) crashed! The blue light comes on, and I can hear the hard drive spinning, then sounds like it's stuck, or clicking ...
Same thing happens to the internal HD on my iBook G4. Sometimes the internal HD works, sometimes not.
I desparately need to find someway to attempt to either fix the external 500GB HD, or recover the files. The 500GB was my main HD, and I have so much very important data that I need to recover (no backups!).
I have years of research (lots of family history), thousands of pictures (many very old), my personal journals that I've been keeping for years, personal information, letters, documents, family videos, and all of my e-mail.
Somebody was telling me that there is special software that will recognize the HD, and allow you to recover the files.
What would you recommend? At the present I have no money to do anything, but will save up for the recovery software. My uncle is getting me a new hard drive, so I'll have that to back up the files when I have the recovery software ...
Luckily, this is not my primary Aperture library, but another one that I started a few weeks ago as I thought my first was getting a bit large. I am unable to open Aperture at all, nor can I copy to or from the drive. Because the drive is (I believe) bad, I can't repair the library, plus, as I mentioned, I can't open Aperture anyways. I can pull the drive, but then how do I get Aperture to redirect itself so that it opens my original library, instead of trying to open this new one? Pulled the suspicious drive from my Mac Pro. On restarting, Aperture asked which Library I wanted, adding that one was no longer available. So, I'm back on the original library and things look to be running fine. Unfortunately, I hadn't vaulted yet, so the last month is probably gone. Luckily, I think I already exported the few keepers I had during that time.
View 2 Replies View RelatedI have a 2007/2008 MBP 2.4Ghz running 10.6.2. I was having repeated hard crashes
due, I think, to some stupid firefox mods I made a few days ago. Every 1-3 hours, the system would freeze, make that crackly thinking really hard noise, spin the beach ball, and wait for me to hard restart. This happens 3 or 4 times today, and on the last crash, the system hangs on restart. Grey screen, spinning grey circle of circles for 10 or so minutes. I can't wait any longer, so I hard restart again, and again the system hangs indefinitely. Now I start to get a bit worried. I boot from the Snow Leopard install disk and open disk utility. From there, I attempted to verify permissions, but the process hangs with one minute remaining for at least 20 minutes. A crash while trying to repair a crash. Great.
So I hard restart AGAIN, and open disk utility, this time selecting repair disk. The utility detects a few errors, supposedly corrects them, then hangs for about 2 minutes, finally culminating in the hard drive disappearing act. The bar looks complete, but the hard drive is gone from the list! GONE! I can't select it from the sidebar in Disk Utility. It doesn't show up in the Startup Disk menu. The only drive I can access is the dvd drive with the Leopard disk. I opened System Profiler and looked under Serial-ATA, and found the only entry was for an Intel ICH8-M ACHI. I don't remember that being there. It used to be a Matsushita drive. Can't find anything on google, and I want to do whatever I can before giving up hope on all my data. Haven't made a backup in a while.
My hard drive crashed and i ended up replacing it. I had downloaded LION OS from the app store and know i would like to re-install on my new hard drive.
Info:iMac (24-inch Mid 2007), LION OS
hard drive crashed after loading lion
Info:iMac
My hard drive crashed so before I sell the laptop, I heard I should do a "7 pass sweep". I'm not sure how to do this from the OS install disk though
View 5 Replies View RelatedJust want to know the proper type to replace it with. Is there a size (gigabyte, not physical!) limit I need to be concerned with?
View 5 Replies View RelatedBackground Info: Earlier today, I experienced a what I am 99.9% sure was a hard drive crash on my white MacBook (about 36 months old). Everything stopped responding, and I heard a clicking noise coming from where the the hard drive is located. I forced a shutdown by holding down the power button, and tried to reboot, only to be greeted by the little question mark folder and the clicking sound. Fortunately, I had just backed it up the previous night, so I knew I hadn't lost anything of value. Then, about an hour ago, a made another attempted to start it up again, and to my surprise, was greeted by no clicking and an logo.
Actual Questions:
I am guessing this is not a one time occurrence, and that the noise and another crash will be back, am I correct? If so, does anyone have any guess on how long until it does return, and ultimately, how long can I put off my trip to the genius bar?
I have an early 2008 Macbook pro 15" 2.4ghz (T8300). Now when it attempts to startup I get the white screen with the spinning circle but it stays stalled at this screen indefinitely. While the icon continues spinning theres also a constant clicking sound coming from the hard drive. I have the Snow Leopard Install disc, but unfortunately the disc drive malfunctions ever since the laptop was dropped several years ago. (This happened a good year before the hard drive began failing) So booting from the disc wont work.
I have an external usb drive that I thought I could boot from but would need to make a separate partition, thus losing over 2TB of music, movies, and documents. What I think I should do...?: Buy a small SSD to replace the failing hard drive. Using another mac, plug in the SSD via usb and install Snow leopard onto it. Then plug the SSD into the Macbook pro via usb and boot from it to make sure everything works. Then install the drive internally.
Info:
MacBook Pro, Mac OS X (10.7.4)
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
My 500GB external hard drive (Hitachi DeskStar) crashed! The blue light comes on, and I can hear the hard drive spinning, then sounds like it's stuck, or clicking ...
Same thing happens to the internal HD on my iBook G4. Sometimes the internal HD works, sometimes not.
I desparately need to find someway to attempt to either fix the external 500GB HD, or recover the files. The 500GB was my main HD, and I have so much very important data that I need to recover (no backups!).
I have years of research (lots of family history), thousands of pictures (many very old), my personal journals that I've been keeping for years, personal information, letters, documents, family videos, and all of my e-mail.
Somebody was telling me that there is special software that will recognize the HD, and allow you to recover the files.
What would you recommend? At the present I have no money to do anything, but will save up for the recovery software. My uncle is getting me a new hard drive, so I'll have that to back up the files when I have the recovery software ...
I had a fairly extensive music collection and recently i had to get a new hard drive. I didn't think it would be a big deal because i had always updated itunes Match. But iTunes match isn't showing me my library to download my music again.
Did i completely misunderstand iTunes Match? Do i have to start over?
All the music properly downloads on my iphone but not my mac.
I'm looking for a FREE data recovery app for os x to recover data from a NTFS hard drive. The hard has lost it's volume and will not mount and I've tried some other programs and I can see the files but I can't get them off because every program I've tried isn't free and won't let me copy them off. I've tried looking for one but I can't seem to find a good one. I just want to copy off the files and then I'll wipe the drive and fix the parition.
View 5 Replies View RelatedI have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.
Info:
MacBook Pro (13-inch Mid 2012)
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Was working on my emails and computer crashed. When I turned the computer back on everything came back except the email program and emails.
Instead it asks me to open new mail account. I can find the emails on my hard drive but when I click on them...goes to same window to open and asks to open new mail acct. How can I recover and have access to my mail account?
Info:
Mac Pro, Mac OS X (10.5.8)
