I want to record something on 'Quest' tonight (Freeview channel 38) but, although it's there on my TV and Humax, it's not showing on EyeTV. I've tried both a full rescan and the exhaustive scan, but still nothing. It's plugged in via a y-connector from the main wall socket (the other side going to my Humax/TV) and signal quality is 100% with signal strength being 97.5%. why it's not showing up?
View 3 Replies
I need help in being able to have my EyeTV communicate with my ZephIR Infrared device so that the EyeTV can change channels and record TV shows by itself on my Cable Box. They're not communicating with each other at all.
View 6 Replies View RelatedI have Elgato EyeTV Digital TV Recorder Version 2.5.3 (3313) running under OSX version 10.4.11 and using a Miglia TVMini (TVM01) USB 2.0 DVB-T Digital Video Recorder device.
Recently, (after no software changes except maybe a osx/safari/itunes update, but I can't imagine why this would cause a problem), certain channels now display "No Signal", and when I check the preferences Signal info, these channels have a strength and quality of 0%. This seemed to happen all of a sudden, and I now cannot get the channels working again (despite trying a signal booster, re-scanning all channels) while other receivers (i.e. a TV) seem to work fine from the same input.
A full listing of the channel titles (and numbers) which are displayed as having 0% strength and quality are: Yesterday (12), 4music (18), Film4 (15), Viva (21), Ideal World (22), ITV4 (24), Dave ja vu (35), Big Deal (32), Virgin+1 (35), Create & Craft (36), Rocks & Co (40), Lottery Xtra (45) Russia Today (85), smileTV2 (94), Babestation (96), Babestation2 (99).
how to get these channels back working again?
does anyone know how to get comcast hd and hbo channels to show up in eyeTV if i'm subscribed to them?
View 3 Replies View RelatedThis should really be directed at Elgato but I reckon I'll get a quicker answer from you guys I'm thinking about picking up an EyeTV Hybrid, which can receive digital terrestrial channels. Here in NZ, Freeview HD uses MPEG-4 and AAC, and I can't find any information about whether EyeTV supports these formats. Does anyone know?
View 6 Replies View RelatedI was thinking about picking up an EyeTV 250 (not plus) or EyeTV Hybrid on eBay. I wanted to use it not for TV on my computer, but to digitize VHS tapes. Would the EyeTV Hybrid be capable of this or would the EyeTV 250 be higher quality?
View 4 Replies View RelatedIs there anyway to watch TV channels like NBC, E!, CNN and CNBC on QuickTime?
View 6 Replies View RelatedI knows this sounds like an irrational connection, but after upgrading to Snow Leopard, eyeTV has a MUCH worse channel reception here. Nothing else in the setting changed and it's for many days now so that a temporary reception change because of weather etc. can't be the problem. It's that bad that most of the channels don't even get enough signal anymore to create a picture. (But, as described, it's not a total failout which would be much easier to hunt down, I guess.) I also tried the new eyeTV beta (and de- and reinstalled the program again), but nothing changed. It seems as if I am the only person in the whole wide world who experiences this DRAMATIC change in signal reception just because of Snow Leopard or is anybody else out there?
View 16 Replies View RelatedI currently have cable TV via Cox. I have an HD DVR Converter box which enables me to see high def and non high def programs. I don't have any premium movie channels. I would like to buy the EyeTV for my Macbook but am unclear on something. I have tried researching this on their forums without luck. If I connect the EyeTV250 directly to the coax cable, completely bypassing my existing converter box, will I be able to receive all of the stations I currently receive when viewing TV normally. Specifically, will I be able to view the HD channels?
View 3 Replies View RelatedI have a huge number of Radio channels that Apple iTunes (v 10.6.1) comes with by default (as you know if you've ever looked at the Radio listings).
How can I delete most of them so I don't have to scroll through them?
Info:27" iMac, Mac OS X (10.6.8), 32" secondary monitor
Is there a way to do that in snow leopard? I'm trying to get sound from a game, lets say, from my built in speakers, and quicktime movie sound from the tv that my mbp is plugged into (from the headphone jack basically) is there a way to do it at the same time?
View 1 Replies View RelatedAfter lots and lots of reading I went for flashed Sapphire 4870 512 off eBay for my Mac Pro 1,1 running SL 10.6.2, with two Viewsonic VP2030b. The guy selling the card had sold flashed cards before and had 100% feedback, said the card worked with dual monitors and supported SL. Got the card, installed it without a problem, but could not get it to work with both monitors.
Second monitor said no signal on both DVI channels. Checked all the wires, reinstalled, rebooted, no luck. Plugged both into my 7300GT, no issues at all. At one point, I got the left monitor to boot as the extended desktop, showing the dock but not showing the HDD or icons (which should be on the right screen), but the right screen still showed no signal and was black. Used the gather windows botton in the display preferences to see if adjusting settings helped, still nothing. Detect displays button was no help either. Is this a compatibility problem on my end or a flashing problem on his? Contacted him and he said he had no issues with his MP 1,1 and two 20" Apple displays.
I'm placing images in both Quark and InDesign. When we go to preview image they appear with there alpha masks activated. Images have to be .tifs and we have to use alpha channels.
View 1 Replies View RelatedQuestion:
At the moment I've got a DualBand Airport Extreme with two Airport Expresses bridging on either the 2,4 or the 5 Ghz channel.
Can I replace them with one Airport Extreme which bridges both channels?
As in:
One Extreme transmits both 2,4 and 5Ghz networks, and the other one connects and extends both channels?
Is there a plugin that allows you to make HSL adjustments to individual RGB channels in FCPX, much as you can in Lightroom and (now discontinued) Aperture?
View 3 Replies View RelatedSomeone edited a sequence for me in Premiere. The audio was recorded 4 channel on a external recorder (four mics were used). At times, he used the wrong channel in the timeline. I believe what he did was take all the channel one audio and put it on the timeline and deleted the other 3 channels. Hence In many cases, using the wrong mic.IS there a way to swap channels in the timeline? I would almost need to do a reconnect, but swap channels at the same time. I use FCP and will convert this to a FCP sequence using 7toX.
View 2 Replies View RelatedI'm looking to buy one of these, but I can't seem to figure out what the actual differences are?Is the 250+ basically just a 'Hybrid', but with more features?
And if so, what features?
Just curious as if the eyetv can pick up all of the channels from comcast say up to 600+ channels? I have the NBA league pass and I wanted to watch multiple games on the mac.
View 5 Replies View RelatedWirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5) I have 2009 Unibody Mac book pro 15", 2.53 ghz, 4 GB Ram. I have a new EyeTV with my HD TV roof top antenna. When I watch on TV the football on Fox channel which is The video is chopping from time to time. Why is that? My Mac Book Pro is more than suffice as it require to meet with EYeTV.
View 6 Replies View RelatedDoes anyone know if the picture quality would be higher on the EyeTV Hybrid vs. the Hardware Encoding limitations of the EyeTV 250? Like... I have a really fast computer, can I encode at top notch quality on the Hybrid, that way I get the maximum picture clarity? Basically what I'm asking is is the computer encoding superior to the hardware encoding in some way?
View 24 Replies View RelatedI just bought an EyeTV 250 Plus, and I was wondering if there is any way I can capture HD 720p and HD 1080i video on my MacBook?
I ask because when you record a file and export it, it gives you the option to export the recording in HDV 720p or HDV 1080i .. doesn't this mean that you should be able to record in HD?
This unit doesn't come with Component outlets, it only lets you plug on the Red, White, and Yellow Composite cables and an S-Video cable, but you need either an HDMI port or an Component to capture 720p or 1080i, correct?
Am I missing something here or can you not record in HD? If not, then what's the point of those HD export settings?
So I bought the newest EyeTV Hybrid under the assumption it would (with little tweaking) operate in windows as well.
Which it doesn't.
The device is recogniezd as EyeTV Hybrid in windows, VID=0FD9 PID=0018.
I'm trying to install the Hauppauge software (4.6b) to use it.
So, I edited on of the .inf's so that my gf's comp now thinks the device is a HVR-980. And am installing as I write this. The hardware search/driver install bounced befor I edited the infs, but now says it got the 980 installed, requiring reboot... -> So, off to reboot.
I will report back to you.
So i've read a few threads on here mentioning the ZephIR and their website claims it can be controlled by EyeTV.
It looks great, but does anyone have any experience with it?
I'm definitely thinking of getting an EyeTV and an IR controller would be perfect!
I have had an EyeTV 250 for a few years now and have upgraded to digital TV for obvious purposes. I got a set top box because it was much cheaper than a new EyeTV. However, there is no option to make the set top box an option? Any type of plugin. I am using version 2 of Eyetv software. Do I have to update to version 3?
View 2 Replies View RelatedI just change a old MBA 1.6 GHz (OSX 10.6.1) for MBA 2.13 GHz (also OSX 10.6.1) and haven problem with EyeTV (3.2.1 version) via Pinacle Hibrid Stick 330e. Soft start excellent - I can see video for few minutes (3,4-5) and than video stops - audio is going (but only for next 2-3 minutes). To see something I have to restart soft or unplug an plug stick to USB port (I do not use HUB, I only use extension of USB cable - MBA have not so much space to plug directly Pinacle Stick). I have to say that on old MBA everything works fine, same OSX version, same USB extension cable, etc.). I try to see if soft and stick works on another computer - I use MacBook Black version (last black configuration) and results: no problems. Video do not stops! I try to find solution on macs forums but I did not find anybody who have this problem.
View 4 Replies View RelatedMy friend has the 24" white, 2.16Ghz iMac - spec http://www.everymac.com/systems/appl...nch-specs.htmlHe is currently running a fully updated install of Tiger, and running EyeTV v2.5.3 and VLC (unknown version). Here are the problems being exhibited:1/ When EyeTV is running, it will sporadically, and unpredictably, crash without explanation.2/ Many times, the iMac will not even boot - it gets so far @ the grey screen, and then the "Please restart your computer" screen pops up:3/ Also, when using either VLC or EyeTV, sometimes there are patterns of green *horizontal* lines, spanning the area of the video playback window (NOT the entire iMac screen) - this happens a LOT.I have booted in safe mode, verified the volume in Disk Utility, repaired permissions, and it still exhibits these same issues. Also, EyeTV will freeze when displaying video, quite often.
View 1 Replies View RelatedI'm looking at buying a Mac Mini to replace my current Media Center, and will probably go for an EyeTV Diversity tuner - just wondering if I install Vista with Bootcamp will the tuner also work with Media Center?
It looks identical to Hauppauge's WinTV-NOVA-TD which works with Media Center and EyeTV, so I assume it probably does if you install the Hauppauge drivers -
I asked a previous question (don't know whether you can see the last ticket as it is now closed) when my imac suddenly crashed and wouldn't boot. The problem seemed to be resolved by typing /sbin/fsck/ -fy after pressing Apple + S after powering up. All seemed to be working fine except EyeTV wouldn't load/
I assumed it was the usb stick that caused it as the light wouldn't even appear and have purchased a new version. Receiving it i still seem to be having the same problem. Most times it crashes with only the icon bouncing in the dock then disappearing. Although i did manage to load it once and get through the eyetv setup stages with a live picture in the background although it then crashed after i closed the setup window and now can't get anywhere again
The report window comes up and gives this information, don't know if it means anything to you:
Process: EyeTV [195]
Path: /Applications/EyeTV.app/Contents/MacOS/EyeTV
Identifier: com.elgato.eyetv
Version: 3.0.1 (3545) (3.0.1 (3545))
Build Info: EyeTV-3545~3545
Code Type: PPC (Native)
Parent Process: launchd [72]
Date/Time: 2008-05-09 03:08:38.027 +0100
OS Version: Mac OS X 10.5.2 (9C7010)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000020000
Crashed Thread: 0
and then a long line of coding
Another point is that i can't seem to reset permissions in disk utility. It starts and comes up saying estimated time less than a minute but then freezes
Just wondered what i should do as it seems to be a fault with the imac now and i really haven't got a clue how to get it going (if it's even possible).
So I've owned Elgato's EyeTV Hybrid product for about 2 years (previously had the 250 model) and really enjoy recording sports games with it (plenty of Patriots, Celtics and Red Sox memories on my Mac now!).
But, all of a sudden, almost no channels are available. After a lengthy back and forth with Elgato's awful online email support, it turns out Comcast now requires a digital cable box for almost every basic cable channel except PBS and CSPAN. Who wants to record CSPAN? That essentially makes the EyeTV Hybrid a useless product for two reasons:1.) It forces you to get another digital cable box from Comcast for about $8/month2.) Prevents you from using the software or the EyeTV iPhone App to watch live TV, control recordings via guide, etc.
The only solution is to buy their new EyeTV HD product for $200 but you'll still need to pay Comcast for a dedicated box. I've asked Elgato's customer service repeatedly for a discount on the new product, since it's really my only option and because the product I purchased less than two years ago has been stripped to nothing. It's been 20 days and no response from them. I guess I'll just buy a Slingbox instead...recording ability or not.
I know a lot of us have the Elgato Eyetv Hybrid and would love to use it on our Macs in conjunction with Bootcamp & Windows. Well I finally figured out how to do it! All I had to do is slightly modify some Windows drivers.
The hardware being used is very similar to the Hauppauge USB Sticks.
Elgato made 2 versions of the hybrid; the older version without QAM and the newer version with QAM. (It has been brought to my attention they also have a new version out with radio capabilities).
I have only been able to test this on the hybrid WITH QAM.
I was able to slightly modify the Hauppauge drivers which allowed the Elgato Eyetv Hybrid to work under windows using both the Windows Media Center and the standalone player by Hauppauge.
So here is what you need to do:
Go to Device Manager
Vista users: Right click on Computer > Click Properties > Click Device Manager
Now you should see some devices under "Other devices" with a yellow question mark next to them. Both should be called "EyeTV Hybrid" There are two because the USB stick has both a digital and analog tuner.
Right click on either device > Click Properties > Click Details tab > Where it says Property, scroll down to Hardware IDs
If the bold numbers match, these drivers will work for you. (If they don't match please provide me with your numbers so I can try and make drivers that will work for you.)
USBVID_0FD9&PID_0008&REV_0005&MI_03
Now we can close the EyeTV Hybrid Properties windows which brings us back to Device Manager.
Download both the modified drivers (an attachment below) and the manufacturer software here:
[URL]
Unzip and open the manufacturer software, navigate to the Drivers folder, and replace: HCWemBda.inf and HCWemBda64.inf with the modified drives you downloaded from me. (You also have to unzip and open the folder you downloaded from me).
Now go back to your Device Manager window, Right click on one of the EyeTV Hybrid devices with the yellow question mark next to it and click Update Driver Software...
Click Browse my computer for driver software > Click browse and navigate to the drivers folder from the manufacturer's software > Click Ok.
Do the same for the other device in Device Manager.
Now go to the manufacturer's software you downloaded earlier and double click Setup.
Finish the install and you should be Done
