Final Cut Pro X :: Camera Icon On Bottom Left Of Imported Clip (AVCHD)
Aug 27, 2014
I import clips from a flash memory drive (the one attached to Sony NX5U camera). The drive is connected with USB cable. All clips imported are fine except one. The problematic one is in the AVCHD category in the browser and has a little camera icon on the bottom left of it's thumbnail. I cannot share the project containing that clip (there is a message that says:''this Item cannot be shared while it is still referencing media on the camera''). What does that icon mean and how do I import the clip properly ? I tried importing the clip again and it does the same thing...
Info:
Final Cut Pro X, Mac OS X (10.7.5)
View 1 Replies
ADVERTISEMENT
Sep 7, 2014
I changed my mind on my workflow and want to link to external media rather than copying them to my libraries.That said...Is there a way to change the clip references?I went into the "Original Media" folder of the library, deleted the clip.
Then when I went back into the library, and went to "relink" the missing media. I navigated to the clip on the external source.However, it automatically created a copy again. I didn't see anywhere where I can opt to relink it as an external link rather than copy to library.
View 1 Replies
View Related
Aug 22, 2014
I'm doing a quick promo. I recorded a rough script VO, organised my clips and music.
I then had the professional voiceover artist record a revised script.
However, I can't simply replace my original script as we have added a couple of things. What I would have done under 7 is lock the background music and video clips in place, remove the VO timeline, and then replace each bit separately. However, I can't do that because the video clips have connected themselves to each other.
I also have shuffled a couple of things around so need to keep the video the same, but move the audio to a different part. I can move the video without moving the audio, but I can't move the audio without moving or deleting the video.
View 1 Replies
View Related
Aug 31, 2014
after color balancing a clip I get a flickering border on top and bottom of my clips, visible in timeline and also after rendering. It's easy to see in this clip (starts around 15 seconds in): URL....
If I remove the color balance it will go away. I wonder if it has to do with the source clip being in 1080i instead of p. The preceding clip is also color balanced but is in 1080p. It's less noticeable but sometimes still there when other color correction is invoked. I'm using a late 2013 Haswell 27 in iMac with 8gb ram.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
View 7 Replies
View Related
May 3, 2010
I cannot open HDs in my Mac as they have this bloody Lock Icon on it. I tried all sorts of gimmicks aka change privileges , reinstall OS to no solution. PGP WAS installed..
OS 10.6.3
View 2 Replies
View Related
Nov 23, 2007
-Downloaded a movie from a torrent site (Dont shoot me, I rented it like 6 times)...
-After download was complete, i opened it up...
-it was an .mp4 file and it played in Quicktime and I could see it AND hear it, everythings' fine...
-I drag the file into iMovie HD...
-After the clip (or movie) was imported I played it and it doesn't show video, i can only hear it.
ive been wondering what it could be, i upgraded to quicktime pro to try and convert it to .mov and still, same thing happened...
View 2 Replies
View Related
Mar 10, 2010
I'm trying to use an AVCHD camera to stream to UStream as a webcam.
UStream doesn't detect the camera, even when change the Adobe Flash Player settings and the UStream capture device settings.
How can I get it to work using USB?
Is it also possible to use the HDMI port on the camera?
Is there such a cable that converts HDMI to Firewire 800?
View 1 Replies
View Related
Apr 5, 2012
how to download AVCHD from my Sony Handycam HDR camera - I can get the camera recognized on the desktop but am unable to find it in iMovie (11) to import it?
Info:
iMovie '11, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 27, 2010
Does anyone have experience using Final Cut Express (FCE) with AVCHD files on a Mac mini? Editing AVCHD is CPU intensive and Core 2 Duo instead of i5 on the mini is disappointing. But in practice, is the performance acceptable? I don't do large projects. The Mac Pro is out of my price range.
View 5 Replies
View Related
Dec 2, 2014
Well, till the upgrade to FCPX 10.1.3 i have problems with importing footage from my Sony VG30 ( .MTS AVCHD files). From the past, i just copy the file from the SD card on the computer and then import it in FCPX. When i do that, i can't import it, but there are audio bugs (parasite sounds).From the past, that method also work on FCPX 10.1.1 but now i'm on 10.1.3 i can't see the content of the SDCard, arriving to AVCHD folder, FCPX will no more import or recogniste it as video media.
Info:
iMac, OS X Yosemite (10.10)
View 1 Replies
View Related
Jul 1, 2014
Just updated to 10.1.2. My typical workflow is as follows:
1. Copy AVCHD folder (with all files and file structure) from a SD Card to ext HD
2. Import AVCHD folder (with all files and file structure) from ext HD to FCX
But all of a sudden, when I look to import new footage that I just copied to my ext HD, I no longer have an option to import an entire AVCHD folder (with the file in it). FCX doesn't even show the AVCHD folders on my ext HD.
HOWEVER - When I copy a newly created AVCHD file to my desktop, FCX sees those files (though I don't have the option to import and entire folder filled with the AVCHD files).
I have an entire ext HD full of archived AVCHD folders from SD cards. I thought this was a good way to have back up files (I also have these AVCHD folders on another back up cloud drive), but now it looks like I can't even access them with the new FCX update.
View 3 Replies
View Related
Jun 30, 2014
Our company just bought a Canon Vixia HF R52 camcorder so we can shoot instructional videos, edit, then upload to YouTube for our customers to access. This camcorder has dual recording in AVCHD and MP4. The guy doing the recording and the guy doing the editing live on opposite sides of the country, so the files will need to be uploaded to a website for sharing.
Question 1: Will the AVCHD files be too large to upload to a file sharing site or is it better to use MP4?
Question 2: Which version of Final Cut can handle AVCHD the best, Final Cut Pro 4.0.1 or Final Cut Pro X?
View 2 Replies
View Related
Jun 20, 2014
I messed up a library and lost a project, then I found a copy of it in the backup folder, now when I open the project it asked me to relink files, but a part of them are inside an avchd package. How to relink those files ?
View 4 Replies
View Related
Jul 25, 2010
I just got the new incase hardshell for my 13 MBP, but the bottom piece doesn't clip on properly. Has this happened to anyone else? I'm following the installation instructions, but am I doing it wrong?
View 3 Replies
View Related
Dec 16, 2007
I am desperate to get some HD AVCHD footage off my new(ish) camcorder on to my iMac.
Neither iMovie nor iMove 6HD can transcribe AVCHD so I recently bought Final Cut Express 4.0.
This package at least accesses the movies on the HDD on the camcorder, but when I use the Log and Transfer or Capture facilities Final Cut lets me select a clip but when it tries to transfer it the application just crashes.
View 4 Replies
View Related
Jul 1, 2014
After updating to 10.1.2 it seems that FCPX now uses a different file naming scheme on imported AVCHD files.
Previously on import, it would use a file naming scheme based on date ie. '2014-06-14 10_49_47 (id).mov' etc. which is great for me as I could see exactly what date & time that clip was created at a glance in the event viewer, also when a camera on a shoot had it's time out by an hour due to an incorrect daylight saving setting, I could use easily go through the clips tweaking the time in the file name & then they would show in the correct order in FCPX.
Now 10.1.2 just imports the clips using the useless file naming scheme of 'clip #1.mov' etc ...
Any way to get FCPX to import using the old naming scheme - or am I now boned if I have a camera set incorrectly ...
View 6 Replies
View Related
Apr 17, 2010
I had clips from my camera that I put into imovie and it's just fine, then later on out of nowhere when I start it it says something like "this imovie project is made for an older version of imovie, would you like to upgrade it and make it match your current version".
Strange thing is I never upgraded my IMovie or anything and now I open it and the videos are in the trash, but instead of the clips I have, it's dragonball z clips with the filename of my files which makes no logical sense. How can I get my clips back and why did this happen?
View 1 Replies
View Related
Dec 2, 2014
Clips are shot with 25p. Due to neon lights there is flicker in bright areas. How can I reduce that?
Info:
Final Cut Pro X
View 1 Replies
View Related
Aug 31, 2014
In compositing, I sometimes need to use snippets from previous episodes, e.g an audio grab from an older program, or a 5 sec preview.
Is there a fast, direct way to regenerate that grab within my new movie so I don't need to save the entire source movie along with the back up of my new movie?
Info:
MacBook Pro, Mac OS X (10.6.8), Intel Core 2 Duo 2.53 GHz 8GB RAM
View 5 Replies
View Related
Jun 30, 2014
I am able to create a multicam clip, and when I double click it it drops to the timeline & appears in my Angles viewer. However, when I hover my mouse over the 3 different angles it doesn't change to the blade, nor does clicking the clips themselves seem to make any cuts. In short, I have a multicam clip that I can set up but cannot edit. Have the Pro Manuals & watched many how to videos but I cannot tell what I'm doing differently.
View 5 Replies
View Related
Jun 6, 2014
I have a long videoclip that i have spent hours keywording. The masterclip was first synched with audio from a external source, the keyworded into smaller sections. These sections cannot be stabilized... The stabilize function is not in the inspector for these clips.
Info:
Final Cut Pro X, iOS 7.1.1
View 1 Replies
View Related
Jul 1, 2014
Using FCP X 10.1.2.
After I create Compound Clip, I open the Inspector Window to see the location of where this clip is residing. But it just states (in the Inspector Window) under Location is (Multiple Files).
Is the CC just acting as a pointer to the files that I created the CC with ... or am I just not looking at the correct location / information?
View 2 Replies
View Related
Sep 8, 2014
I have a wav file that I've imported, which sounds completely fine on regular playback but becomes very poor quality when imported into the timeline. I know on FCP7 you had to convert to an AIFF but I've not had this issue before on X.
Info:
Final Cut Pro X, OS X Mountain Lion (10.8.2)
View 1 Replies
View Related
Feb 12, 2006
Is it possible to have more than 1 dock. I tried to search for an app to do this but could not find any. I want to have one dock on the bottom, and one on the left, both for different types of apps.
View 17 Replies
View Related
Mar 2, 2010
I recently cropped a clip but I still want it to take up the whole screen, the reason I cropped it was because I did not want the unnecessary space. Is there a way that I can enlarge the clip so that it takes up the whole screen again?
View 2 Replies
View Related
Jun 4, 2014
I am running Final Cut Pro 7 and I have a clip that already has RGB Balance filter and Key filter on it. I am adding Brightness Contrast or any of the other Gamma Correction type filters to the clip, It lets me adjust the filter but when I render it this filter is not included in the render. I have done some experimenting and it seems that the RGB balance is what is stopping this filter from being applied.
I have tried with all the possible filters that will let me adjust the levels on the image, I have tried taking the clip with the first two filters and nesting it then applying the new filter to the nested clip but nothing seems to work. This clip is too dark...
Info:
OS X Mavericks (10.9.3)
View 3 Replies
View Related
Nov 30, 2014
I have a Library containing 22 Events which are numbered instead of named. Each event contains Green Screen clips whose thumbnails all look the same. I found the set of (Piece to Camera) clips I want, using a keyword search of the Library - but now I want to create a Compound Clip in the relevant Event so that I can do a rough edit (discard unsuitable and duplicated narrative etc).
Next, I want to copy the remaining good clips from this Compound to a new Project - in a different Library. I don't want to copy the unwanted clips.My problem is, finding the Event these clips originated from. I can use the disclosure triangle on each Event in turn, but surely there's a better way to find the parent Event of a clip in the browser?
Info:
Final Cut Pro X, OS X Yosemite (10.10.1)
View 6 Replies
View Related
Sep 3, 2014
In FCP 7 I'd just hold down the Shift key when moving clips up or down (on tracks). What would be the keystroke to do that in FCP X? So I can move audio clips up and down, but not sideways?
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 19, 2014
how to reaconnect video and audio of a one clip, after you have detached it
View 1 Replies
View Related
Jun 29, 2014
I am importing for the first time with this Mac and this version of iTunes. The songs are in a Music folder as .aiff files, just as they always were. I select them to import, but I don't think anything is happening. I have searched for them by song title several different ways; they don't seem to be there.
View 1 Replies
View Related
