I am brand new mac user, never used it before, I just got an older iMac and want to learn about it. I need help to know what's the newest system that can be installed on it.
its 500 MHZ power pc processor
30 GB Hard drive
512 Ram
I want the newest possible system so I can start on a newer system espicially since i am still a starter. Another question I have, do i have to purchase a cd to install a system or is it possible to download it from the internet?
I'm coming from a good 7-8 years with an old G4, so forgive the ignorance. On that one, I added a PCI audio card to connect with some Altec Lansing speakers with Sub-woofer & simulated Surround sound. It sounded great. hat's your suggestion? Get a similar card for the G5?Or get some new speakers that will sound as good?I don't know anything about digital audio out. Does that connect to speakers, or only tuners?
Could anyone recommend an external (FireWire 800) Hard Drive that they're using without issues with a Power Mac G5 (mine is a Dual Processor 2.3)?? I bought a couple of WD My Book Studio Edition but have no end of problems on FW800, and looking around here so is everyone else. LaCies seem to have similar problems, plus my own experiences in selling these and seeing FW ports falling off the enclosure's board, etc., puts me off them. Maxtors seem to have different issues and the new brown and orange Seagates are too fugly to even consider. So, anyone recommend a solution (250-500GB) that works fine with FW800 on a dual PMG5??
I put my i5 to sleep around midday, came home from work @ 4, and my iMac would not respond to keyboard, mouse, or power button mashing. My wife noted the power had gone out upon seeing the microwave clock. I checked the outlet (her Macbook was plugged into the other receptacle), and there's still power going to my machine.
I have this iMac for slightly over two years and when I forst got it I thought it would be a good idea to have it start up a 6:55am each weeday. After about a week I changed my mind and went back into Power Saver and turned off the settings. Since then, I can't tget the machine to quit auto-starting at 6:55, 7:55 and even sometime 8:55. I have called Apple, taken it in to an Apple store, they even claim to have replaced the computer
My IMac crashes sometimes very suddenly, like in a power failure. It doesn't force quit or shut down, it just goes like somebody pulled the plug. It's usually possible to start it up again after 30minutes or an hour. The plug and lead seem to be fine. I tested it on another mac. The obvious suspicion would be overheating, but how can that be caused so suddenly (and how can I fix it)? It's an IMac Intel core duo, 20", 2 ghz, 2gb ram from 2006. I'm running Mac OS X (10.4.11) 2006.
Just recently (this night,) whenever I would unplug my main USB hub, my iMac (Late 2006) would turn off (that is, instantly shut down as if the power had been disconnected). I don't know why this happened, but it turned on immediately afterward so I shrugged it off. The last time this happened, (the 4th time,) the iMac wouldn't turn back on at all.
It responds to power button presses, and you can hear the harddrive spinning up and the CD drive whirring and fans spinning. The sleep light in front stays on, but the display stays black, and it doesn't make the characteristic chime when it "turns on". In addition, it doesn't seem to be delivering power to USB devices, so there's no way that I can boot up from a startup disc or anything to see what's going on.
What do you guys think could be wrong with my computer? I doubt my non-existant applecare would cover anything of this sort, and I'm pretty sure that i'm SOL for hopes of a computer that just works. In addition, one other question. I was working on a VERY important school assignment at the time, (cliche, I know,) so is there any way I can connect another computer to my iMac so I can get my school assignment off of it?
Information: G5 Intel iMac (Late 2006) Mac OS X (10.6.4)
I just bought my Intel-based iMac last night and it took forever to turn on out of the box. I guess I made a mistake by doing a "soft" power down last night, because this morning it will NOT turn on. I've tried using the power button and waiting. I've tried unplugging and plugging it back in, and then using the power button, and waiting. Nothing works. I've been a PC user for 20 years and just bought this, my first Mac, last night. I think I've made a huge mistake! How the heck do you turn these things on????
Someone switched off the power to my iMac the other day. Since I've rebooted:a] System Profiler shows no awareness of FireWire ("Unable to list FireWire devices" in red) b] Every boot takes about five minutes, 3+ of which seems to be spent waiting for a response from the FireWire socket (the logs show a 3-minute gap followed by a line that goes something like this:"/usr/lib/exec/hidd: Timeout waiting for IOKit to be quiet") c] if it's idle long enough to go to sleep, it goes into a kernel panic (the last line in the log before the panic says"kernel[0]: IOPMSlotsMacRISC4::determineSleepSupport has canSleep true")b] looks connected to a], but I can't see any connection with c] (apart from the reference to IO).
I have a 20" intel-based dual core Mac which i have had for about since early 2006, i haven't had any big issues with it until a few days ago when it suddenly shut itself down and refused to power back up. I ran through the checklist that Apple Support provides, including resetting the SMC by unplugging everything and waiting 15 seconds or so but none of it worked. Eventually I just left the power cord unplugged overnight and in the morning I plugged it back in.
After having the power cord plugged in for a few hours and the machine turned off, i tried pressing the power button again and to my amazement it powered back on! Immediately i ran the TechTool Deluxe software that came with my extended protection plan (now expired) and everything was fine. Later that night however, I had left my computer on for a few hours before returning to it and realizing it had shut itself off again. Now I am back to where I started, going through the checklist provided by Apple and am really starting to get concerned. Does anyone know of anything else I can do, short of taking it in to an Apple store? Or is something needed to be replaced?
Information: IMAC-Intel (Early 2006) Mac OS X (10.4.11)
my iMac won't turn on. The day before yesterday happened the same thing, but after a few tries with the power button, it eventually turned on - and all ok yesterday. Both the day before yesterday and today, the general power was turned off for some minutes, but the iMac wasn't running. So now, I've tried to reset the SMC, removing everything attached, but nothing.
At least I can clearly hear the tic tic tic button, probably of the timer, because I set up a schedule to let it turn on at a certain hour. What can I do? It's a white iMac, never had a problem.
A friend of mine wants to buy a "vintage" iMac. He's an interior designer so going for the iconic look rather than specs and looking at the original G3 style or the "pod" style G4s.
Now this will be used primarliy for web browsing, email, iPhoto and iTunes (streaming his music collection to Apple TV - about 50GB of music). He'd like it to run OSX and preferably Leopard.
I'm guessing (from memory) that the original iMacs are out of the question but can anyone suggest a spec he might look for? Maybe somebody that's still using one of these machines could give an opinion? Also, what's the max spec (cpu, hard drive, RAM) that he could expect to pick up?
I replaced the 250G drive in my imac with a 1T (SATA) drive 2 years ago, but now the 1T drive is close to capacity. I was wondering if anyone had any internal hard drive recommendations for a 2T drive. I have been having some strange problems lately with my imac locking up with only the mouse responding that may or may not be hard drive related. I was using a Seagate drive but I would like to go with someone else.
Looking for a recommendation on temperature widget. This new i5 is too hot to the touch on the top. Well I could hold my hand there but it is not fun to do so. So I want a good widget/etc that will give me an idea of how hot it really is. On a side note. I cannot hear the drive or fans in my new i5. For wow players, all options (including full shadows but no full screen bloom), it bottoms out around 27fps in heavy effects environments or fast spin in busy Dalaran.
Peaks are beyond refresh (in fact I may want to cap that). After a three hour session the top portion of the aluminum enclosure was too hot to keep my hand pressed to it so I am looking for something to convince myself I am not going to end up with a cooked iMac in a few weeks. Since my desk is in the center of the room there is no problem with air flow but I don't want to have to run the ceiling fan.
I'm looking for some feedback as to what speakers to get for an iMac 24" (when we finally get our hands on it)
It must: Be great for positional audio for gaming Perform brilliantly at producing my high bitrate iTunes library. Meet points 1 & 2 baring in mind my room is longer than it is wide - 8 feet wide by 13 feet long It must not: Be a mess of wires - it's connecting to an iMac after all Exceed �200 (excl. P&P) 2.1 channel or 5.1 channel audio is fine, it's the quality I'm more concerned about.
i just got my new imac 2 days ago. I was wondering is there another to turn on the power without pressing the power from button? (cuz i remember u can power on from the keyboard b4)
Sometimes when I try to turn on my power mac G5 don't work. I have already changed the inside battery and also trying to reset the pmu. The only thing that works always is to disconnect the power cord from the back some minutes.
Information: G5 Mac OS X (10.5.1) PowerPC G5 (2.2)
I've kept a PPC with system 7.5.1 around for reference to prior financial records.Now chose to wipe it clean, along with 3 external HDs.
Erased internal disc, then erased three external discs.
Maybe that is enough, but I recall that if financial and personal data is on a drive, the only way to insure it is not accessible is to overwrite the drive.
How can that be done with 7.5.1???
What I did do is use Silver Lining to also erase the HD and THEN set a password to both start and open the drives. Will that suffice? or what??
I have a PowerMac G5 dual 2.3 ghz w/ 1gb ram and a G4 Quicksilver with 2 internal ATA drives Internal drive specs : 2 IBM 180GB IDE/ATA-5 Deskstar 8MB 180GXP 7200 rpm There is also an ATA card that was installed to be able to run these drives in the G4 - don't have specs available right now. Is it physically possible to transfer these drives to the G5? Will I have to transfer the card also? Is it likely to cause any problems -compatibility , speed, etc? The drives are currently full of media - how risky is it to move them from one system to another?
Over the last few months I've noticed a trend with my dual 2GHz G5 at home, it often locks up and the fans go full-throttle. It sometimes happens when I'm using it and often when I leave it idling for a while. I've noticed that the CPU A and CPU B temperatures start around 120 degrees F when the machine is first powered up and steadily climbs to around 150. Is that normal? The dual 1.8GHz G5 I have at the office doesn't run hotter than 110 degrees. The fans haven't failed. Is there a coolant link? Is there anything I can do to diagnose this, or do I simply need to call AppleCare?
I have a G5 Dual 2.5 and the power light on the front (white) is lit but nothing happens when I press the power button. I was trying to reset the PRAM manually by pulling the battery and inplugging the unit because my startup shortcut keys were not working. I had seen it recommended to reset it by pulling the battery and reinstalling in other threads. I put the battery back after about 15 sec and plugged in back in. Now it wont start up.
Will a 600W power supply from a June 2004 dual 1.8 G5 be compatible with a dual 2.3 early 2005 system (450W)? Are the connectors any different? Will a bigger power supply overload the system? I know that the 600W June 04 power supply can be used with a dual 2.7 early 05 machine (600W) despite a rubber grommet that the 04 doesn't have.
The other day my friend gave me his old macbook saying that it was broken and would only turn on sometimes. I have had this computer for 2 days and it has never turned on yet. He kept the hard drive so the machine does not currently have one. He also could not find the Mac OSX install CD, so I don't have one either. The battery is fully charged (the lights on the bottom of it are all on) and the light on the adapter is green. When I push the power button, nothing happens. No lights, no noise, nothing. I called apple and they told me that without a hard drive, the only way to test it would be to boot off of the Mac OSX disk by holding "c" when the computer is booting. The problem is, 1, I don't have a disk, and 2, how am I supposed to hold the c key while the computer is booting if it will not turn on? I have tried everything it says on the apple website and have tried it with different ram, with and a usb hard drive plugged in.
I am considering getting a used MB Pro for editing home movies. OK, its not Final Cut Pro stuff, but this will be the most demanding thing I use the computer for. In the past I have used iMovieHD and iDVD to make movies on my 12" PB G4 with a 1.25 GHz processor and 1.5 GB of RAM and ATI Mobility Radeon 9700 with 64 MB or 128 MB (not sure which). This has worked fine, but I can tell its a little slow. I certainly can't plan on doing anything else at the same time.
But, now the previous generation MB Pros are going for $1000 (used or refurb) on eBay and I am considering getting something like a 2.4 GHz / 2 - 4 GB with a 256 or 512 MB Nvidia 8600 graphics card.
ppc desktop using OS 10.5.8. purchased ilife '08 to get latest imovie, iphoto etc. package. system requirements on disk says 10.4.9 and up is required. when imovie is double clicked to open, dialog says imovie will not work on this system. iphoto, i dvd etc work ok. only imovie is a problem...
I want to get a battery backup for my PowerMac G5 dual 1.8ghz PPC, but the numbers confuse me. the UPS selector tool on APC's website suggests I can get away with one that runs at 800VA.i dont need it to last long, I'm really just looking for something that will protect from surges, condition the power, and give me enough time to shut down in case of a power outage. I wouldnt need more than a few minutes, and I dont expect more than a few minutes power supply.
I've lost all my panes after clicking on System Preferences under the apple menu (and also 'open date & Time'). It flashes as though wanting to do something but no pane.
