Power Mac G5 :: Recommendations Of External FW800 Hard Drive
Dec 7, 2007
Could anyone recommend an external (FireWire 800) Hard Drive that they're using without issues with a Power Mac G5 (mine is a Dual Processor 2.3)?? I bought a couple of WD My Book Studio Edition but have no end of problems on FW800, and looking around here so is everyone else. LaCies seem to have similar problems, plus my own experiences in selling these and seeing FW ports falling off the enclosure's board, etc., puts me off them. Maxtors seem to have different issues and the new brown and orange Seagates are too fugly to even consider. So, anyone recommend a solution (250-500GB) that works fine with FW800 on a dual PMG5??
View 9 Replies
ADVERTISEMENT
Nov 12, 2010
This is in regards to the 2010 mini. I have been reading up on SSD, Hybrids and FW800 with a 7200. What is the easiest AND most effective/cost effective solution? If I went he FW800 route, can I use the same drive as my data storage drive? Will there be enough headroom to run the OS over FW and use the drive to stream movies playing in another room on Apple TV2 simultaneously? Will this give me a performance increase over the internal 5400 if I use the external 7200 for everything over FW800?
That is where my thoughts about the hybrid come into play. I know I can stream the iTunes content over USB2, which I have at the moment for the big drive. I would need to go buy an enclosure with FW800 to run it as a boot drive. I could use that same money and go get a 500GB Hybrid drive and install myself and leave the USB2 as data only. If the install is painless but tedious, I might just do that. If the FW800 route would be robust enough to run the OS and stream data to other devices simultaneously (ie use it as I would the regular internal drive), I might just do that and wait for SSD prices to come tumbling down and do a bigger internal SSD in the future.
View 3 Replies
View Related
Sep 29, 2009
I have a late 2007 150 GB Macbook Black. I'd like to finally backup my data and also use it for games or other storage to play directly from, cause I'm almost out of room on my my Macbook. What kind of portable hard drive do you use, or recommend?
View 14 Replies
View Related
Dec 11, 2008
I have been using a MBP for a few months now and I am making a total conversion from PC user to Mac user in January when I buy a nice new 24" iMac but to go with it, I want to buy a couple of new external hard drives. I have currently got a Seagate FreeAgent 500GB USB Drive which is Windows Formatted and I will be keeping that to use with my work laptop (a Dell), and I have been really pleased with its reliability. Anyway, I have been looking around and there are some fab drives on the market but I have a couple of questions. If I get an iMac with a 500GB Internal Hard Drive, how big an External hard drive will I need to use Time Machine without having to delete backups all the time?
Also, I have been primarily looking at the new Seagate FreeAgent drives and the do a PC version (USB) and a Mac version (USB/FW400/FW800), but the 640GB USB version costs �76 whereas the 500GB FW version costs �100. Would you go for the bigger size or the added benefits of FW800? Will I notice much speed difference between USB and FW800?
View 6 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
May 16, 2010
I just bought a 640gig Samsung 2.5 inch / 5400rpm drive and threw it in a FW800 case from Other world computing. Running some test using the QuickBench 4 and AJA system test shows me that this little bugger is almost as quick as my internal drive on my MacBook Pro (Model number: WDC WD6400BEVT-00A0RT0). How can this be???? I did a varity of test with different file sizes and the Samsung get 70 MB/s vs about 84 MB/s for the internal drive.
My internal drive is pretty full vs this external drive that is currently empty. I do a lot of video work / large gigabyte files on the drive so perhaps I have a defrag problem? I really expected my internal drive to blow the FW800 connected Samsung out the water?
View 1 Replies
View Related
Jan 9, 2010
I bought a MacAlly GS350SUAB hard drive enclosure for the firewire 800 port. Before I made the purchase, I looked around for some FW800 drive xbench scores and found a few results:
[URL]
When I ran the xBench disk test on my drive, I was unimpressed. They weren't much better than when I plugged it in using the USB port.
Uncached Write34.81 MB/sec [4K blocks]
Uncached Write43.62 MB/sec [256K blocks]
Uncached Read18.11 MB/sec [4K blocks]
Uncached Read46.06 MB/sec [256K blocks]
I thought maybe xBench was sucking, so I timed how long it took to write a 831MB file to the drive using both USB and FW800, and it was actually faster (marginally) on USB. FW800 took 30 seconds, while USB took 28. Something doesn't seem right. Does anyone have any thoughts on why this could be? I do have a FW400 audio interface hooked up, but that is of course plugged in to the FW400 port and shouldn't make a difference. The hard drive I'm using came out of a Seagate FreeAgent. Is it possible it's just a really slow drive?
View 8 Replies
View Related
Oct 9, 2007
I am a photographer. I use 4 X 1TB LaCie external hard drives to store my digital images. 2 as masters for different business segments and 2 as their back-ups. They are daisy-chained using Firewire 800. Recently my G5 has stopped recognizing one of the drives. Is there any way to get my machine to re-recognize the missing drive? I have rewired the four drives to see if there was a problem with the cabling, but this does not appear to be the case. I am coming up to the 1 year warranty period on this drive and need to get it back to LaCie if there is no other solution.
View 6 Replies
View Related
Dec 31, 2009
I bought a brand new Seagate 400Gb hard drive for my PowerMac G4 MDD FW800. I installed it in the back bay, as a slave drive. When I power on the Mac, I get a blank grey screen. The original hard drive with OS 10.4.11 is set as the master, so I don't know why it won't boot properly. I've checked for bent pins, and I don't see any obvious ones, so I'm completely confuzzled.
View 1 Replies
View Related
Dec 23, 2010
so I am in search of a new 500GB-1TB External Drive for Time Machine, and it has to have FW800 as well as USB 2.
I was thinking of getting an external chassis and buying my own hard drive, has anyone purchased a good external chassis with both ports, or a all in one drive that is worth the money?
View 6 Replies
View Related
Aug 11, 2010
First I wanted to upgrade my new mac mini with a Momentus XT but now I'm thinking about getting a "real" ssd + a FW800 drive for storage to have the huge speed boost of the ssd drive. Does anybody have this combination in his mini? What I want to know: How is the performance like of the external drive connected to FW800? Is it comparable to a standard internal hard drive?
View 11 Replies
View Related
Mar 1, 2010
I have a PowerPC G4 running OSX 10.4.11 that contains a lot of media files. I want to transfer them to my external hard drive (1 tb) so that I can use them on my newer MacBook. I was unable to partition or erase anything on the external hard drive from the PowerPC, because I kept getting an input/output error. I followed the same process and was successful at establishing partitions on my MacBook. Now, I plugged my external into the PowerPC to copy the media files, but it isn't recognizing the partitions on the external harddrive! What did I do wrong?
View 2 Replies
View Related
Oct 6, 2010
I got two questions.
1) What would you guys say the best bang for your buck FireWire 800 is? I hear a lot of differing opinions on this one, so I'd like a couple suggestions, need over 500GB though. 750GB and up would probably be the best.
2) I've got 2 PATA hard-drives from my old Windows PC that crashed, what would you guys suggest doing about getting the data off of them? Most of the hard drive kits I found are for SATA, and the one I found for PATA was like $50 at Best Buy, I just want to get the data off these hard drives and junk 'em. I don't need bells and whistles and fancy enclosures.
View 2 Replies
View Related
Jan 8, 2010
I have a MacBook Pro 15 (2006) 2 ghz core duo, 2 gigs ram, & 100 gig 7200 RPM hard drive. I would like to change the the hard drive out to a larger one, but I'm seeing all kind of reviews & I'm not sure which ones to put more weight on. I have been looking at a 320 Gig or the 500 Gig. Looked at the Seagate, WD, & the Hitachi. I want to stay with the 7200 RPM. I also know there can be an issue with the, shock or drop sensor on the hard drives not being compatible with the laptops shock sensor, as well as heat & noise issues. I will state that this is my first Mac since the late 80s. But that I have a several very good friends that are long time Mac users and that have done this type of switch out, so while I know that the switch out is more complicated than some I have good tech support on that side of this switch out.
View 1 Replies
View Related
Nov 28, 2010
I replaced the 250G drive in my imac with a 1T (SATA) drive 2 years ago, but now the 1T drive is close to capacity. I was wondering if anyone had any internal hard drive recommendations for a 2T drive. I have been having some strange problems lately with my imac locking up with only the mouse responding that may or may not be hard drive related. I was using a Seagate drive but I would like to go with someone else.
View 1 Replies
View Related
Dec 19, 2007
My Maxtor 500 external hard drive has suddenly stopped appearing on my desktop. My other external drives appear. I've tried hooking the drive to my MacBook Pro with the same results. The drive however, seems 'active'. The light on the front of the drive does its usual flashing routine when plugged into a new machine. I've never had a crashed drive before. Does it sound like this is what has happened, or does anyone have a clue as to what I should do?
Information:
G5
Mac OS X (10.5.1)
MacBook Pro
View 6 Replies
View Related
May 2, 2012
I am trying to back-up my computer to my external hard drive and a box is popping up saying "You can't open the application WD Backup.app because PowerPC applications are no longer supported."Â What does this mean? I have updated my system to Lion since my last back-up. What do I need to do?
Info:
Mac OS X (10.5.6)
View 2 Replies
View Related
Jun 2, 2012
I wasn't sure if it wouls be a bad idea if I wiped the interal hard drive while I'm booting from a recovery disk, then made a RAID 0 with the internal drive and my FW800 external drive. I'm nearing my max for the internal drive. I have a second FW400 drive backing up with Time Machine. I was hoping to just wipe, make the raid volume, and then restore from the Time Machine backup.Â
I guess even before that, my FW800 is not working in Lion. I reformatted while connected by USB, reset power management, and reset PRAM, but the firewire bus panics and takes out the Time Machine on FW400 as well. Is there a fix for this somewhere that I'm missing? I bought the FW800 drive for the above reason, only to run into a wall trying to make it work. I really don't want to do a RAID 0 with a USB connection.Â
I'm not going to try setting up the RAID 0 until I get the FW800 drive working reliably, but I was hoping to kill two birds with one stone.Â
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
View 2 Replies
View Related
Sep 7, 2009
I'm looking at buying a 500gb external hard drive, and the actual drive itself can only be Western Digital (I won't touch any others, not even Seagate).I can get a 500gb Western Digital Passport for $119.99 CAD in black with the enclosure of course: click hereMy other option is to buy the drive separately, the Western Digital Scorpio 500gb for $99.99 CAD: click here and a cool case of my liking off eBay for about $13 CAD: click hereNow, my question is this; does it matter which case I use in order to make sure the drive is able to be powered with only 1 USB port? I've heard some notebooks dont give enough juice to certain usb ports and would require a y-splitter to use two usb cables in order to power it (im guessing netbooks would probably suffer from this). I remember trying to use a 2.5" lacie external with the orange rubber padding around it, connected it to the front port of a Powermac G5 1.8ghz and it wouldnt mount, unless it was connected to one of the usb ports on the back of the machine.
View 7 Replies
View Related
Aug 6, 2009
So the time has come that I bought a 5D Mark II and have begun editing a lot of HD footage, and my Mac Pro's current hard drive setup will not suffice. My current setup: Bay 1 = WD Raptor X 150GB 10,000RPM (OS, Final Cut Studio 2, Adobe CS3, etc) Bay 2 = Apple-supplied WD 320GB 7200RPM (Music/iPhoto libraries, small Windows partition) Bay 3 = Samsung Spinpoint 500GB 7200RPM (Media dump/scratch disk for editing, as well as my spillover Applications folder, etc) Bay 4 = Empty I'm looking to revamp this setup, as I'm struggling in many ways. First off, my main boot drive being the Raptor 10,000RPM was a dumb idea. Yes, it is faster, but I can't install the full OS X, FCS2, CS3 packages and my regular cornucopia of apps without leaving ~1-5GB free. I feel that this kills any speed gain because the drive is full to the brim, and for such a minimal speed increase I'm working with a very very low ceiling of free space. I'm considering ditching this and going with a bigger 7200rpm drive so I don't have to worry about running with a filled up drive again. Here's my idea. I was thinking of getting a 1 or 1.5TB 7200RPM drive to run the OS on and also store my footage, keep all my applications, downloads, etc. Then I could move my 150GB Raptor X out to bay 4 and make that my project scratch disk for video editing(not sure it'd be big enough for larger projects). And then if I had any money left, I would axe the 320 and put another 1TB in its place. Or I could save money and get that new nVidia card for the Mac Pro (I still have the stock HD2600).
I boot windows and play games, but rarely. Would this upgraded video card help with video editing or rendering effects significantly enough to justify the ~$400 pricetag? Or should I save my money and buy camera equipment? More importantly, any recommendations for the quickest/most reliable 1-1.5TB drive out there? or should I avoid them? I don't want to spend a ton of money so I'm not looking to do expensive RAID setups or anything, i'm not editing uncompressed.
View 10 Replies
View Related
Mar 3, 2009
I want to partition my external hard drive for my g4 power based mac running Leopard.I will have one partition for Time Machine and the other for Carbon Copy Cloner.Here are my questions:1. Which partition scheme should I choose for Time machine?2. Does Carbon Copy Cloner work the same way for non-intel macs as it does for intel? Do I need to click on the OS 9 check box to make my version of CCC bootable (I want a bootable clone)? Which partition scheme should I choose for Time machine?
View 1 Replies
View Related
Feb 11, 2009
Need some recommendations to doing full image backups of my entire hard drive.I currently use Acronis TrueImage 11 for my PC's but since i have a Macbook, i need to be able to backup both my HFSJ partition (OS X) and my NTFS boot camp partition (Vista).Acronis TI does not read HFSJ partitons and will only backup my NTFS partition.Simply put. I want to have backup images of my entire drive in the event my drive takes a dump.
View 7 Replies
View Related
Mar 15, 2012
Transfer information from one hard drive to another hard drive
Info:
PowerMac, Mac OS X (10.5.8), G5 dual 2.0 processors
View 4 Replies
View Related
May 31, 2010
I am brand new mac user, never used it before, I just got an older iMac and want to learn about it. I need help to know what's the newest system that can be installed on it.
its 500 MHZ power pc processor
30 GB Hard drive
512 Ram
I want the newest possible system so I can start on a newer system espicially since i am still a starter. Another question I have, do i have to purchase a cd to install a system or is it possible to download it from the internet?
View 4 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Apr 18, 2010
To get my Multimedia-Data off my MBP i5 SSD I am looking for a small, 1 2,5" hdd enclosure that is FW-800 powered. I was unable to find anything in the forums nor in the buyers guide about this. Any recommendations or tests?
I am looking for something well designed if possible (imho like the LaCie Little Big Disk Quadra, which has two hds (double the power comsumption) and is too big).
View 3 Replies
View Related
Dec 7, 2009
I may soon buy one of the newer generation iMacs that drop the FW400, includes 800 only. On my current Mac, I have a FW800 drive and a FW 400 drive. I use the 400 for time machine as speed is less important. My current iMac has a 400 & 800 connector. I have tested connecting the 400 to the 800 drive via daisy chaining, so everything is pulling off the 800 connector, so this assures me I can do this with the new iMac. However, Does it slow down your 800 drive when it has a 400 chained off of it? Or, if the 800 is the first drive connected to your iMac, do you maintain full speed?
View 5 Replies
View Related
Dec 9, 2007
I'm coming from a good 7-8 years with an old G4, so forgive the ignorance. On that one, I added a PCI audio card to connect with some Altec Lansing speakers with Sub-woofer & simulated Surround sound. It sounded great. hat's your suggestion? Get a similar card for the G5?Or get some new speakers that will sound as good?I don't know anything about digital audio out. Does that connect to speakers, or only tuners?
Information:
G5 tower
Mac OS X (10.5.1)
View 2 Replies
View Related
