IMac :: Intel IMAC Wont Start - Monitor Blank?
Jun 11, 2009
I have an Intel IMAC, which is now out of warranty as I have had it for 16 months (and I was dumb enough not to get AppleCare). A few days back, my computer would not startup and everytime I hit the power button, I would hear some spinning noise but no chime from the iMAC. Yesterday, I tried it again and this time I heard the chime but the monitor did not start. I was then able to SSH into the MAC and see that it is indeed connected to the network and booted up, but the screen is still dead. Any ideas what I should do before the painful trip to the apple store ?
View 2 Replies
ADVERTISEMENT
Jan 4, 2010
Yes I plugged in the block heater.....
Tried to reset the SMC (apple's only advice)
Tried to kick it into boot menu... no luck
managed to boot to Leopard install disk. backed into Disk Utility.... Verify System Disk produces: "Invalid B-tree node size...Disk Verify / Repair fail".
too bad too sad... no more information.
I don't know enough to know whether this is a SW failure or a drive failure, and my searches has led me here.
Also, my very first post in a forum, I read the rules and I hope I have found the right forum for this query.
View 1 Replies
View Related
Nov 4, 2009
I did a pram reset but that did nothing (I heard the initial chime and the one after the reset....still the same problem.) I'm a bit worried because I don't hear the hard drive starting up.
Some more info... Intel Imac 17" (late 2006 model), 512 mb of RAM, running 10.4 (I think). I am not familiar troubleshooting macs but I am troubleshooting PCs.
View 7 Replies
View Related
Sep 10, 2014
My screen had black and white vertical lines pop up over the entire screen then went blank and now at a restart the password then loading spinning circle happens then I get a blank white screen.It's a 27 in Intel iMac that is about 2011/12 purchase
Info:
iMac (27-inch Mid 2011), OS X Mountain Lion
View 1 Replies
View Related
Sep 20, 2008
When I try inserting blank (brand-new) CD+ or CD- and DVD+ or DVD- discs, the slot-drive seems to accept the disc just fine. But then. I hear 2 short "whirrs", nothing for about 10 seconds, 2 short "whirrs", nothing for about 10 seconds, 2 short "whirrs", then the disc is ejected.I have experimented w/different discs & get the same results each time: drive accepts the disc for about 30 seconds, never mounts it on desktop, then ejects it.
View 5 Replies
View Related
Apr 2, 2012
I have an iMac 27-late 2009 (YD03003M5PE) I'm considering buying a macbook air for business travel, but when I'm home would like to use it through my monitor and keyboard. what's the best way to do that? should i connect it directly as a monitor? / keyboard? (hardware connection) can this be done through the video port? alternatively, should i use a remote screen/monitor access of some sort? (software connection)
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 11, 2014
Am I able to connect the cable to the iMAC monitor so I may watch TV?
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.5)
View 2 Replies
View Related
Jun 28, 2014
After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
View 6 Replies
View Related
Dec 5, 2014
I have an iMac 5K connected to a second monitor (HP ZR2740W) via mini DisplayPort to DVI adapter. In Displays prefs, I can only select resolutions of Best for Display or Scaled-1280x720 (which doesn't change anything.) I'd like to be able to change to a higher resolution.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Jun 3, 2014
my new imac has recently been displaying a red screen for a split second on startup, does this indicate a problem or not. I'ts my first mac so I know very little about it being a regular pc user.
Info:
iMac, OS X Mavericks (10.9.3)
View 1 Replies
View Related
Aug 25, 2014
The computer was my friends old one, which she gave to me as a gift. I'm trying to set a lock/password on it but it won't let me set one without the old password, which she doesn't know.
Info:
iPod nano, Other OS
View 1 Replies
View Related
Sep 12, 2014
I have a 2010 iMac that won't start when I press the power button. No chime, no fan running, nothing. I tried unplugging it and plugging it into a different power source which made no difference. I made sure the power cord connections are good. We recently had an 8 hour power outage at my house and this is the first time I tried to power the iMac up since the power outage (it was working fine prior to the power outage). Of note, my husband's iMac started up fine after the power outage.
Info:
iMac
View 3 Replies
View Related
Jun 24, 2014
Can I make my iMac always start up in TGM mode for my Mac Pro? Such as keeping it in TGM mode all the time
View 4 Replies
View Related
Aug 12, 2009
So My name is Lindsey and I have been an avid apple supporter. However in the last two weeks I've come extremely close to selling everything apple I own and going back to windows. I purchased a refurbished Intel Imac through the apple store about 4 months ago. Awesome computer, everything worked great. Well I recently decided to add an additional monitor so of course I started browsing the forums and did my due diligence. I read that there were some compatibility issues with some of the older imacs and the apple 24 in led display so naturally I called my nearest apple store to find out if I could use this display.
The sales associate listened as I explained that I had a 2008 intel Imac and assured my the display would work without an adapter. Of course you guys know this is totally wrong but I was unaware of this fact at the time. SO I drove a 6 hour round trip to Dallas and paid 970 in cash for my new monitory. Get it home and realize that something is obv wrong. I call the store back and the clerk tells me I need an adapter that can be bought at Best Buy. I drive 45 min to best buy. They are sold out. Next day I drive an hour and a half to the next closest Best Buy. They dont have it either..............................
View 12 Replies
View Related
Aug 27, 2014
I have a blurry spot in the middle of my imac screen. It is the shape of a kidney bean.
Info:
iMac, iOS 7.1.2
View 1 Replies
View Related
Jun 22, 2009
I just got the new 24 inch intel iMac yesterday and it was working fine until tonight. I installed Skype and as I was using it, the computer froze and said I had to restart. So I did that. It happened again, but this time, it wouldn't restart. It went grey and kept making loud beeping noises. I looked up what could cause this and it said that if the RAM was upgraded improperly this could occur. The problem is, I never upgraded the RAM. Its been working fine for the past day until now. What should I do?
View 1 Replies
View Related
Dec 10, 2014
I am running into an issue that the screen resolution of my imac keeps resetting to scaled 1600*900. I can use system preferences to change this to 1080p but every time I restart the computer it is back to 1600*900.
I have tried clearing the PRAM, but it has not worked.
Info:
iMac, It is not OS specific
View 1 Replies
View Related
Sep 8, 2014
I turned my iMac on (2008 model) but after 10 minutes it went black and beeped 3 times loudly, repeating at 5 second cycles. Shut it down by pressing the ON button for 5 sec. Restarted and all worked for a hour before repeating the same problem...screen and keyboard and touchpad all locked out....shut down with the ON button. On restart it gave me the 3 beeps every 5 sec with an ALL BLACK screen...no hard disk whirring, either. I don't know how to do cardiac massage on an iMac. Is it dead? Is it the processor? Is it the video card? Is it the hard disc?
Info:
iMac, iOS 7.1.2
View 10 Replies
View Related
Jun 3, 2014
is there a way to clear the start up items for one user, ox 10.9.3, only oner user fails out of three on iMac
View 1 Replies
View Related
Apr 4, 2012
Is there anyway to connect my Dell Latitude laptop to my 27" iMac to use as a monitor.I have been told that it is only possible to connect mac to mac.
Info:
iMac, Mac OS X (10.7)
View 6 Replies
View Related
Aug 27, 2014
Connect a HP 2309m Monitor to iMac with Thunderbolt to Hdmi Adapter.
View 3 Replies
View Related
Aug 28, 2014
Whenever I start up my mac iTunes and Skype open automatically, how do I stop this?
View 2 Replies
View Related
Aug 20, 2014
My Imac 17" doesn't Start, it holds on loading drivers. i have bought it from Second Hand
Info:
iMac
View 1 Replies
View Related
Nov 30, 2014
My imac is around 4 years old and has been running both windows bootcamp and os x snow leopard for at least 3 years without any problems. My default operating system is mac and when I tried to turn it on this morning it gets stuck on the white screen with the grey apple icon and the loading icon spinning. Also a bar appears below this that I have never seen before. I have tried opening the mac in recovery mode but it does not respond and goes to the same logo screen.
I have tried holding the 'D' key down while the mac comes on and doing the apple hardware test but once the window pops up it does not complete the probing and appears to freeze just before its completion. I have also tried booting in safemode but the script stops at these commands:
-launch tl: Please convert the following to launchd: etc/mach_init.d/dashboardadvisory.plist
-launch_msg(): socket is not connected
However, the windows bootcamp is working fine and I can access my mac files from there.Also worth mentioning is that it is not a grey screen that appears on start up it is just the normal apple icon screen.
Info:
iMac (21.5-inch Mid 2010)
View 4 Replies
View Related
Nov 14, 2009
I have a 27" Imac and want to use an old 19" monitor as an external unit. I have it hooked up and turned on. Just the old wallpaper shows on it. There isn't an icon or anything diff on my iMac screen for it. How do I use the external? I realize this is pretty dumb, but I'm a newbie here and my Mac expert son is in NC....
View 9 Replies
View Related
Nov 16, 2008
I have a G5 iMac - 2.1 ghz, 20", 250gb hd and 3gb ram, but it has been having problems starting up and it is also going to sleep midway through a task or at random times totally unprompted.
It now almost never starts up first time (I keep the iMac mains power lead always connected and the mains electricity supply turned on at all times now)- sometimes I will get the 'Start-up Chime' and then the cooling fans start spinning very loudly and then after a few seconds the iMac stops the start-up routine, but often when I try to start-up I don't even get the 'Start-up Chime' and I have to leave it for some time before trying again.
I can also now only get the iMac to run as a Firewire Target Disc by starting up with the T key held down and then using an old G4 (400mhz) Powerbook Titanium as the screen/keyboard by using the iMac HD as the startup disc for the Powerbook but this is obviously just a temporary work around.
I have also tried backing up all my data, and reinstalling the Mac OS X onto the iMac but the iMac still will not start-up normal and I still have to use it just as a Firewire HD.
View 1 Replies
View Related
Jan 25, 2007
My parents recently bought an iMac. Yesterday my mom was playing a game when the computer froze. Neither force quit or holding the power button was doing anything so in her frustration she unplugged the system. Today, after plugging in the system again, it won't turn on.
I press the power button on the side of the wireless keyboard and the green light on the keyboard turns on for about 3 sec and then starts flashing. No fans start up and the screen does nothing.
Information:
iMac and Macbook Pro
Mac OS X (10.6.3)
View 14 Replies
View Related
Aug 26, 2014
Running mid-2009 iMac with latest Mavericks 10.9.4.
DVD Player has been performing perfectly in Snow Leopard until this update to Mavericks.
I've tried resetting SMC/NVRAM. Reinstalled Mavericks 3 times. Tried dumping the plist too. That did nothing. I've re-set SMC/NVRAM...done the Permissions using Disc Utility.
I can get a DVD to load selecting the Recovery Mode StartUp disk. Then I reboot and the DVD plays fine using the DVD controls. But ejecting and trying it again - it won't play.
Info:
iMac, Mac OS X (10.6.8)
View 3 Replies
View Related
Sep 1, 2014
iMac start up... Why my imac start with question mark sign on gray screen
View 1 Replies
View Related
Sep 4, 2014
My Mac does not start, the mouse freezes in the left corner of my screen and displays a block break?
Info:
iMac, OS X Mavericks (10.9.1)
View 3 Replies
View Related
