The computer was my friends old one, which she gave to me as a gift. I'm trying to set a lock/password on it but it won't let me set one without the old password, which she doesn't know.
Info:
iPod nano, Other OS
My father who is 91 purchased an iMac in January used it once. He is now just setting it up again after he has recently moved and this will be his only computer… finally getting rid of the PC world of Bill Gates and into a real computer. However, he has forgotten the login password at start-up which was set-up at the Apple Store. Can I reboot the machine with a CD (have one for Snow Leopard) and change administration details this way even though is running OS X Lion?
View 3 Replies View RelatedWhy would all my password saved sites keep losing my filled in name and password?
Info:
iMac, OS X Mavericks (10.9.3)
My imac takes my password and then the color wheel displays. The screen cycles quickly and then comes back to type password again. I have shut down and restarted the computer multiple times.
View 3 Replies View Relatedmy iMac is asking for a password at login and I have never set one up. How do I get past the login screen?
Info:
iMac (21.5-inch, Late 2013), iOS 7.1.1
I have an Intel IMAC, which is now out of warranty as I have had it for 16 months (and I was dumb enough not to get AppleCare). A few days back, my computer would not startup and everytime I hit the power button, I would hear some spinning noise but no chime from the iMAC. Yesterday, I tried it again and this time I heard the chime but the monitor did not start. I was then able to SSH into the MAC and see that it is indeed connected to the network and booted up, but the screen is still dead. Any ideas what I should do before the painful trip to the apple store ?
View 2 Replies View RelatedAfter connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
View 6 Replies View RelatedYes I plugged in the block heater.....
Tried to reset the SMC (apple's only advice)
Tried to kick it into boot menu... no luck
managed to boot to Leopard install disk. backed into Disk Utility.... Verify System Disk produces: "Invalid B-tree node size...Disk Verify / Repair fail".
too bad too sad... no more information.
I don't know enough to know whether this is a SW failure or a drive failure, and my searches has led me here.
Also, my very first post in a forum, I read the rules and I hope I have found the right forum for this query.
my new imac has recently been displaying a red screen for a split second on startup, does this indicate a problem or not. I'ts my first mac so I know very little about it being a regular pc user.
Info:
iMac, OS X Mavericks (10.9.3)
I have a 2010 iMac that won't start when I press the power button. No chime, no fan running, nothing. I tried unplugging it and plugging it into a different power source which made no difference. I made sure the power cord connections are good. We recently had an 8 hour power outage at my house and this is the first time I tried to power the iMac up since the power outage (it was working fine prior to the power outage). Of note, my husband's iMac started up fine after the power outage.
Info:
iMac
Can I make my iMac always start up in TGM mode for my Mac Pro? Such as keeping it in TGM mode all the time
View 4 Replies View RelatedI just got the new 24 inch intel iMac yesterday and it was working fine until tonight. I installed Skype and as I was using it, the computer froze and said I had to restart. So I did that. It happened again, but this time, it wouldn't restart. It went grey and kept making loud beeping noises. I looked up what could cause this and it said that if the RAM was upgraded improperly this could occur. The problem is, I never upgraded the RAM. Its been working fine for the past day until now. What should I do?
View 1 Replies View RelatedI am running into an issue that the screen resolution of my imac keeps resetting to scaled 1600*900. I can use system preferences to change this to 1080p but every time I restart the computer it is back to 1600*900.
I have tried clearing the PRAM, but it has not worked.
Info:
iMac, It is not OS specific
I turned my iMac on (2008 model) but after 10 minutes it went black and beeped 3 times loudly, repeating at 5 second cycles. Shut it down by pressing the ON button for 5 sec. Restarted and all worked for a hour before repeating the same problem...screen and keyboard and touchpad all locked out....shut down with the ON button. On restart it gave me the 3 beeps every 5 sec with an ALL BLACK screen...no hard disk whirring, either. I don't know how to do cardiac massage on an iMac. Is it dead? Is it the processor? Is it the video card? Is it the hard disc?
Info:
iMac, iOS 7.1.2
is there a way to clear the start up items for one user, ox 10.9.3, only oner user fails out of three on iMac
View 1 Replies View RelatedWhenever I start up my mac iTunes and Skype open automatically, how do I stop this?
View 2 Replies View RelatedMy Imac 17" doesn't Start, it holds on loading drivers. i have bought it from Second Hand
Info:
iMac
My imac is around 4 years old and has been running both windows bootcamp and os x snow leopard for at least 3 years without any problems. My default operating system is mac and when I tried to turn it on this morning it gets stuck on the white screen with the grey apple icon and the loading icon spinning. Also a bar appears below this that I have never seen before. I have tried opening the mac in recovery mode but it does not respond and goes to the same logo screen.
I have tried holding the 'D' key down while the mac comes on and doing the apple hardware test but once the window pops up it does not complete the probing and appears to freeze just before its completion. I have also tried booting in safemode but the script stops at these commands:
-launch tl: Please convert the following to launchd: etc/mach_init.d/dashboardadvisory.plist
-launch_msg(): socket is not connected
However, the windows bootcamp is working fine and I can access my mac files from there.Also worth mentioning is that it is not a grey screen that appears on start up it is just the normal apple icon screen.
Info:
iMac (21.5-inch Mid 2010)
I have an Imac (late 2009) and I am connected to the internet through a provider and I have my own network which nobody else has the password to. I use WPA protection and it is a strong password. Nobody else uses my computer.
I use Kaspersky Internet Security and I started a quick scan and some how there are password protected archives that I have no access to.
How do I log in after a shut down when I forgot the password
Info:
iMac, iOS 6
I bought a pre-owned iMac, late 2011 running Lion, took it to the Apple store to have the hard drive wiped and Lion re-installed. Then I brought it home and migrated files via Time Machine over from my Mac Book Pro , early 2009, running Mavericks. Now my log-on password no longer works. What happened?
View 2 Replies View RelatedI am running OS X Mavericks, and when I want to, let's say, install a Sims 3 game, it asks for my administrator password. Now since someone else owns the computer (and they don't want me to know their password but I can install the games with their permission) I don't know the admin password, and I want to know, is there a way to bypass that admin password without having to reset it to a pass I know? Or do I just have to deal with the fact that I have to ask?
View 3 Replies View RelatedThe Apple Mac computer is setup with rEFIt and boots into Windows XP.I would like to boot into the Mac, however the username and password don't work. I have tried rebooting and pressing Ctrl+S, but the command line interface didn't open? URL.... apart from a full installation.I don't know if I can access the retail DVD.
Info:
Mac 10.6.8, Mac OS X (10.6.8)
My parents recently bought an iMac. Yesterday my mom was playing a game when the computer froze. Neither force quit or holding the power button was doing anything so in her frustration she unplugged the system. Today, after plugging in the system again, it won't turn on.
I press the power button on the side of the wireless keyboard and the green light on the keyboard turns on for about 3 sec and then starts flashing. No fans start up and the screen does nothing.
Information:
iMac and Macbook Pro
Mac OS X (10.6.3)
Running mid-2009 iMac with latest Mavericks 10.9.4.
DVD Player has been performing perfectly in Snow Leopard until this update to Mavericks.
I've tried resetting SMC/NVRAM. Reinstalled Mavericks 3 times. Tried dumping the plist too. That did nothing. I've re-set SMC/NVRAM...done the Permissions using Disc Utility.
I can get a DVD to load selecting the Recovery Mode StartUp disk. Then I reboot and the DVD plays fine using the DVD controls. But ejecting and trying it again - it won't play.
Info:
iMac, Mac OS X (10.6.8)
iMac start up... Why my imac start with question mark sign on gray screen
View 1 Replies View RelatedMy Mac does not start, the mouse freezes in the left corner of my screen and displays a block break?
Info:
iMac, OS X Mavericks (10.9.1)
My screen will flash pink with a yellow apple icon just after the spinning gears has stopped when I start up.
Info:
iMac, OS X Mavericks (10.9.3)
I am running OSX 10.9.2 on a 2011 iMac. For as long as I can remember it has relentlessly prompted me to enter my password for this keychain and that keychain. How to do I disable this annoying feature?
View 3 Replies View RelatedI want to reset my screen password
View 1 Replies View Related