I shut the computer off like i normally do. It was fine and well. Went to turn it on, and saw a bar. Whats it for? Its been moving, but very slowly. It never does this. Is there malware or something causing it? I had a movie on the DVD slot, it that caused it. It wasn't spinning though.
View 8 Replies
IT does this every time, but when I do command and r or other such keyboard commands, it goes I the recovery pahe with no problem. Whenever I tried erasing the iMac to reset it, it said the disk was locked.
Info:
iMac, OS X Mountain Lion (10.8.5), April 2008 model
I've checked disk permissions, run SMART check. the disk seems fine but the problem persists. It began a few days ago.
Info:
MacBook Pro (17-inch Early 2009), OS X Mountain Lion
I forgot to switch on the power socket at the wall so when I came back it had powered off. When I switched it back on it showed the last screen visible before sleep mode kicked in and then showed the apple logo with a progress bar underneath. The progress bar starts to move slowly but after about a minute starts again. It slowly starts to move again but stops after about two minutes and the macbook powers off.
Info:
MacBook Pro, snow leopard
I just bought a new 27" iMac and when I start it up I get a white progress bar under the apple logo. When it does come up, iTunes will not play and sometimes the computer will not recognize the magic mouse or my WiFi. Everything works fine after I re-start.
Info:
iMac, Mac OS X (10.7.4)
My 24 inch iMac is not getting pass the apple logo. It acts like it's loading, but then the little progress spinner (not sure of the name) stops spinning after 2-3 minutes. It never wants to get pass that. I'm running the latest version of Lion.
Here's the specs:
3.06GHZ
4GB
500GB
NVIDIA GeForce 8800 GS
So far I've tried using disc utility on my snow leopard disc....it doesn't load. I've tried to start in safe mode...it loads about half way and stops. Oddly enough windows xp works in bootcamp. It runs okay besides when I try to move windows. I'm guessing it's the graphics card. No idea really. Here is a video I made to show you what I mean: [URL]. I've also tried installing a new 1TB HD and it still won't boot from a disc for some reason. I tried install snow leopard through the internal superdrive and with an external superdrive. No dice.
Info:
iMac, Mac OS X (10.1.x)
During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?
Info:
iPad 2, iOS 7.0.3, 64 Ghz. 3G
Today just woke up and turned on my iMac. It started with apple logo then I saw a cancel logo which shocked me..
View 10 Replies View RelatedI own a 17" iMac Core 2 Duo. It has been crashing more and more lately. Now when I turn it on, it sits at the apple logo. The spinner does not appear. I tried new sticks of ram, and same thing. I can boot off a windows or Linux cd with the c key, but they freeze halfway through bootup. I ran a hard disk check also.
my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around
Info:
iMac, iOS 4.3
I have Time Capsule and everything is backed up on there. My data is on a separate USB HD + Drobo, but for now I need my iMac to boot but it won't. It won't even get into the Desktop. all the guides online says double click the Install Icon this and that...I would if I can get into the Desktop !
It is just stuck on the Apple Logo screen with the spinny thing, that stops spinning!
when i start my imac it shows the apple logo, then the circle starts spinning and after a couple minutes it just shuts off. BTW i have windows on it as well so when i hold option it lets me open windows but not os
View 8 Replies View RelatedI was working in my iMac - OSX 10.5.8 and i believe i did something wrong. I started seeing 2 restart / shutdown/ force quit links on the apple menu.
View 4 Replies View RelatedHoping someone can help - my imac (approx 15-18 months old , intel) won't start.
Last night on shutting down DPP (canon Digital image software) was hanging and system asked me if I wanted to force quit it...sadly I had switched off my bluetooth mouse and , as usually once mouse turned off switching it back on it never re connects - why did I buy the bletooth mouse and keyboard ?, so I could not confirm yes force quit - is there no way of selecting with keyboard like there is in windows ?
So I switched off at power switch. Tried to re switch on - grey screen came up, apple logo, the little timer circle but after a while timer circle stopped and nothing further happened.
have tried several more times and now don't even get timer.
Upon starting My Intel iMac, it stops at the Apple logo. I have restarted it several times and tried to hold down the "r" key while starting to enter the restore mode...nothing but the Apple logo. OSX 10.7.5
View 8 Replies View RelatedI am fixing this 2007 iMac for free for an autistic child. Apparently, changing computers for someone that is autistic isn't ideal. I don't have the history with this iMac, just that it isn't working. They supposedly did have the hard drive replaced? It sounds like a dvd is inside it when it starts up, could be the installation dvd?Either way, I have not seen it before where the Apple logo refuses to show on the start up screen. It just stays gray. Â
1. I've tried zapping the PRAM. Didn't have any changes.Â
2. I tried starting up in safe mode, but getting passed the apple logo is required for thatÂ
3. I tried single user mode, but getting passed the apple logo is required for thatÂ
4. I tried holding the c key to start up off of the dvd, nothing happensÂ
5. I tried holding the mouse button (and cmd, opt, f, o) to manually eject the dvd during start-up.Â
Info:
iMac, Mac OS X (10.6.8)
I had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").
I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.
I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!
Came home from work the other day and my iMac (20" iMac from '07 / Snow Leopard) was frozen, did a hard restart and it booted up fine without much of a problem. Everything was running very sluggish so I began to verify the disc through utilities at which point it froze again, now whenever I restart I get stuck at a white screen with apple logo and something spinning underneath it. The longest I've let it sit at that screen is about an hour or so, it gets extremely hot though so I'm hesitant to leave it any longer.
I've tried a few suggestions already, safe mode with no luck, disc target onto my macbook with no luck and I've tried "/sbin/fsck/ -fy" at the command prompt which returns something along the lines of Harddrive can not be repaired. The most important thing to me right now is being able to access some of the files on there if it is not a total loss. I've back up about 2 months ago, so it wont be a total loss, but like I said, would prefer to salvage anything I can.
iMac Intel G5 stuck at apple logo.
Info:
iMac, Mac OS X (10.6.8)
My 3-month old iMac was responding very slowly when I used the latest version of Safari. So I forced quit the program. From then on, whenever I turned on the iMac, it would get stuck at the Apple logo start up screen. I had to unplug the power since the machine is getting very hot after 15 mins.
View 3 Replies View Relatedi need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
This situation began when I put my Imac on sleep. After, the screen turned on in black whit the cursor but I couldn't do anything.
Then to rebooted the machine, the apple logo and sound began fine but the screen turned off, so moving the mouse the screen turned on in black with cursor.Â
I'd tried many ways, resetting the PRAM, SMC, repairing the disk and permission, analyzing hardware, repairing fsck files.
Suddenly, when I entered in Verbose mode, mi imac brought into user choose screen and worked fine, but when I shut down and tried to start my mac in the next day, it didn´t work again.Â
Info:
iMac, OS X Mavericks (10.9.3)
Upon start up my screen goes to normal gray w/apple logo and spinner then goes black. Cursor is visible and still is moveable but nothing else. I safe booted and bar came up also but then back to black screen.Â
Info:
iMac, Mavericks upgrade
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
Info:
iMac, Mac OS X (10.6.8)
I purchased a new late 2013 27 inch iMac 3.4Ghz i5. The only thing I did after pulling it out of the box was restore Time Machine from my previous iMac. On startup the machine boots as expected, but gets interrupted by the screen turning a dark blue, and the apple logo turning bright red, for about a second or so, then boots as normal, and opens Mavericks. I've spoken to Applecare - they suggested I re-install Mavericks, which I did. The problem is still there. I've done a hardware diagnostics test - no problems. Though I wonder if it could be a faulty graphics card? As far as I'm aware there are no other issues with the iMac. The machine is under warranty but would love to solve this if possible.
View 1 Replies View RelatedTime machine failed in progress as my hard drive failed. I have an "in progress" file on my external harddrive that is about 160 GB. I would like to try and load this back onto a new harddrive. Migration assistant is not responsive nor does Time Machine recognize the external drive when connected.
Info:
iMac, Mac OS X (10.6.8)
has anybody seen an application that adds a progress bar to Apple mail in Tiger? I really don't like just the spinning gear.
View 3 Replies View RelatedWent to the Apple store, explained my problem and they brought out a new iMac for me. Did a retail swap instead of going through the Genuis Bar. I'm so happy =) =) Got a brand new iMac. This time, I disk Disk Check right away, and it says hard drive appears to be OK. No grey progress bar anymore! The problem was probably b/c the hard drive was defective. It had nothing to do with the unsafe shutdown, or pressing shift, etc...
I have a iMac 27'.. Purchased it 2 weeks ago.
I think I did an unsafe shutdown.. Or I pressed "shift" while booting, or something.. Idk and I also have WinXP installed on BootCamp. However for some reason now every time I startup my Mac, it loads with the grey Apple horizontal progress bar with a little loading animation on top. It's so annoying. This didn't happen after no firmware upgrade or anything. And I don't have any extra hard drives attached. Nothing. Everything is fine. Everything used to work. Even with BootCamp before. I think this happened after an unsafe shutdown or something. And also, my Mac has over 500GB free space still, so that's not an issue.
The progress bar at startup Takes 5-6 min extra to boot up. After it, the Mac OS X loads and everything is fine but that's not what my problem is. My problem is why should I be getting the stupid progress bar EVERYTHING I load my Mac?
I tried booting with installation disk, then going to Disk Utility but NOTHING. I click repair, and after 5 mins some error pops up saying backup your files when you can then reformat the disk.
Oh btw, Anytime I click Repair Disk it goes, then says: Updating boot support partitions for the volume as required. And after that it says: "Disk Utility stopped repairing "MY DISK NAME HERE". Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backend-up files.
Maybe the hard drive is damaged or defective.
I am running an emac with OS X 10.4 installed (I think). Anyway, I've been searching all morning for a solution in the forums, but haven't really seen or been able to solve my problem.
The computer was shut down correctly over the weekend, there are no grinding noises, no error messages, the screen is just stuck on that grey screen with the apple and progress wheel and won't finish booting up all the way.
It's happened once before, but I just did a hard restart on it, and it has worked fine ever since. Never had any real problems until now, but nothing I have tried from searching on the forums has worked (apple X, option control, restarts, etc.). It won't boot up in any kind of safe mode, that I can figure out.
Is there something I am missing, or not trying, or am I just toast?
I have a 13 in. black MacBook (late 2006) and somehow have managed to break it. Last year I had trouble where the computer randomly messed up how it booted and I had to use live Linux cd's to recover my data. I had to completely wipe the drive that time. Things went blissfully on until yesterday when it froze, after waiting for at least a minute when I held the power button down to kill it. I tried to restart but it froze on the apple with the spinning progress indicator. I killed again, and started in single user mode, where I got a plethora of disk0 I/O errors. After waiting there a while the computer stopped doing anything so I killed again. Now, it doesn't even recognize the fact that the hard drive exists. I am able to boot a Linux cd but there is no hard drive anywhere. All help is great as I don't want to keep using this win7 computer.Â
Info:
MacBook, Mac OS X (10.6.8)
