MacBook Pro :: Itunes Not Working Fine - IR Sensors Stops Working
Nov 14, 2009
I've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
F3 and my right shift key have suddenly become play/pause keys in addition to their original functions. My F8 doesn't really do anything anymore and does not even light up in Keyboard View. I've tried to use Sizzling Keys, and reset Keyboard Shortcuts but the problem still persists. It seems to affect most music playing programs (iTunes and Vox. I have a Macbook Model 5,2 and Mac OS X 10.5.8
My Late 09 MacBook Air has been working a treat, not a spot of bother. All of a sudden, about 5 minutes ago, I've gone to go online to download some research papers (I'm *trying* to write an essay) and it won't load anything. Not even my Twitter app. It is connected to the right network, which is working absolutely fine on every other device in the house (windows computers, iphone etc). I've turned it off and on twice, the way that us clueless folk do.. now I don't know what to do.
I'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time...Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
So today I opened up my MBP to clean it out and stuff (it had a ton of dust... A wall of it had built up where the fans blow out)All is fine and dandy now except for one thing. Since I don't want to open my case up for the second time today (right fan wasn't plugged in all the way first time I started it up... oops x( ) I'm asking here since everything else seems to be fine.
What I did: Opened everything up all the way down to the heatsink.Applied correct amount of Thermal paste.plugged everything back in (right fan wasn't perfect at first, but fixed and stupidly didn't double check everything else while I was in there)
And now both fans are running at 6k (full) constantly. I tried resetting PRAM and SMC with no luck. I'm about to grab my disk 1 and run the diagnosis to see if that turns up anything.Are there any plugs that I might have accidentally not plugged in all the way or at all that would cause this? Also any other suggestions if everything is plugged in correctly?
MacBook Pro 2,2 15.4" late '06 10.6.3 C2D 2.33GHz 2GB Ram
Also, I have iStat Menu. No apps using all my CPU (Mostly <10% usage right now) and temp is mostly <40c right now. All temps have a temperature so I'm assuming all heat sensors are fine.On a great note: My computer is so much cooler now! Even before this at 6k rpm I'd get down to MAYBE 45c if I was lucky.I also have Fan Control installed and it's not having any effect
On a day-to-day basis I run: Adobe PS, INDD, and AI, Microsoft Entourage, Firefox and iTunes. Just recently, after an upgrade to Leopard, I added Things and Simplify Media to the list.The problem that happens before (on Tiger) and now (on Leopard) is command+tab switching stops functioning and Expose hot corners and shortcuts stop working.
I'm pretty sure this isn't a Finder crash because before, on Tiger, I could quit+restart Firefox and everything would be back to normal. Almost as if some shortcut had causes the system to act differently or there was some app dissonance?
But now, with Leopard, nothing I quit will cause these two features to act properly until I do a restart. Both features (command+tab switching and expose) are very necessary for my work flow. I have checked SysPref to make sure keyboard shortcuts are default and Univeral Access to make sure assisted devices is turned off.
I just got my macbook pro on monday and today when plugging in my keyboard and mouse into the 1st USB I notice it's not working. I plug them into the 2nd and it works fine.
Is this going to be a hardware issue? I'm sort of gutted, I thought I had a perfect one and now I find something isn't working as it should be.
So to preface my problem let me just say that ive got my own macbook which works on the same wireless network with no faults at all, so i assume its not an error with the networking hardware.
For xmas i bought my parents a macbook, recently (not sure how recently as theyve only just told me its happening) they can be browsing the web then all of a sudden the internet takes ages to load, it stalls on 'trying to connect' for a long time (40+ for each web page).
Ive tried using firefox and the same thing happens so it looks like its not safari specific, during this time i cannot ping [URL] through a terminal either or if i can the response time is unbelievably slow.
Now, ive tried disabling ipv6, ive set the dns servers to opendns and none of this has fixed it. if i click on the airport utility and turn it off and the back on it fixes the problem for a short period of time before it happens again.
basically my airport is not working under leopard, but works fine in boot camp xp.
I tried to delete the network history, keychain info, reboot the system, re-enter the password, no good. now the airport has a self assigned IP address ... I restart to xp, it's fine, go back on os x, no internet i tho it's supposed to be the other way around.
The last few days my keyboard and mouse have stopped functioning at random times on my macbook. I am running snow leopard. I have to shut the lid to put it to sleep and wake it up to get it to respond.
Skype stops working after 20 minutes - the other person can hear me fine, but I cant understand a word the other person is saying (very digitalized). This doesn't happen on the PC so I'm wondering if it's an issue with the MAC. Does anyone have the same problem? Any ideas how to solve it?
This is the most obnoxious computer problem I've ever encountered. I'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time. Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
I have a macbook that is about 2 years old, maybe a little less, and recently it's been giving me trouble. Every time I go online (on firefox or safari), the internet stops working after about 20 minutes. It used to be about every hour but it's more frequent now. To fix it I have to restart. Once I restarted and the internet didn't even work. It's getting to be immensely frustrating since I have to save everything else I'm working on, restart, and then reopen everything. I don't know much about computers but I'm using a wireless that's shared with one other mac and one other pc in the house. Any ideas of what I should do?
After chatting on FaceTime on my MacBook pro for approximately 5-7 minutes, the other person cannot hear me. I went to Apple and they said it may be the actually mic/camera connection and would have to replace it. I can't lose a week without my MacBook!
At least a couple times a week my trackpad mouse click stops working (mouse movement ok) and I am usually browsing in Chrome ver 18.0.1025.165 I have MacBook Air 13" with Lion 10.7.3, anybody experiencing this problem or have resolved?
I noticed my sound wasn't working, so I did a restart. The "blip" sound when you adjust the volume using F11/F12 would play, but as soon as I tried to run something else (YouTube video, iTunes, etc.), that wouldn't play (just get stuck at whatever point I tried to start it). After that, the blip sound no longer worked either.
I have tried the following things already and none of them fixed the problem (all of them reset the "blip" sound, but it always went away again as soon as I tried to play anything):- running Apple Diagnostics (no problem detected)- resetting PRAM- resetting SMC
I've checked things as suggested in other message boards … there's no red light in my headphone jack, nor is the sound muted under System Preferences. The problem persists whether headphones are in or not.
10.9.4 mavericks macbook pro retina to TV via HDMI using an HDMI cable to watch movies on my laptop macbook pro retina. was working this morning, and watched a movie. then I go to work, and come back and now the exact setup is no longer working. it does not show any display in the preferences menus, and the TV is just blue without any input. cable is secure, nothing has changed. nothing.
edit: actually I did pull the HDMI cable out while the two were connected this morning.
tried restarting, reconnecting, nothing ... Why computers suddenly stop working for no reason whatsoever. maybe someone hacked my computer this afternoon while I was gone? it's just a random failure.
Info: MacBook Pro with Retina display, OS X Mountain Lion (10.8)
Macbook Pro 2.2. Is there a way to replace just the magnetic area. One of the electric pins inside is not springing out. The connector ends up getting warm and now it will not even charge. I am using girfriend's macbook magsafe. I dont want to have to buy a new magsafe when I could possibly just replace the connector.
So a couple days of ago, I noticed my MacBook Pro's monitor would cut in and out rapidly for a couple seconds when I adjusted it.Today, my hand grazed the top of the monitor, and it the colors became inverted momentarily. So I decided to touch the top of the monitor again, and my screen became inverted permanently until I tapped it again.
I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, I have tried shutting down and restarting while holding down the trackpad, as recommended on some forums but that has done nothing. It might be a huge coincidence but the drive was working fine before I installed lion?
This morning, the speakers on my MacBook Pro (Early '09) stopped working, but the machine transmits through the headphone jack just fine. I've done a PRAM reset, and that hasn't fixed it.
Info: MacBook Pro (17-inch Early 2009), Mac OS X (10.6.8)
Over the past few months, I have noticed that my MagSafe light will randomly stop working when I plug it into my MacBook. I just unplug it, and plug it back in and it works normally. It seems like the computer still charges though.
I noticed my trackpad started acting funky last night. It won't happen right away when I turn my MBP on, but usually after some time (depends). First thing that happens: it responds slowly; it will move the pointer less than it would normally and it will judder along. Pressing harder doesn't help and sometimes two-finger scrolling won't work one way, or sometimes using my other finger will work better. After some more time, it will stop responding entirely or get unusably slow. I noticed restarting fixes it (temporarily; once again, it depends). Just before posting this, it happened until it didn't want to work at all, and I let it sit for a few minutes, came back, and it worked fine. Ten or so minutes later, its still working (no restart). It's troubling and I'll probably take it to an Apple Store to have it checked out, but I won't have time to do that for some time, so I'd like to see if this is possibly something well-known or fixable.
I thought it might be dirty, but I cleaned it, well, a few times, and still nothing. My hands are clean, too. I thought it might be something I "spilled" onto my keyboard a few days earlier; it wasn't anything watery, it was a rather thick consistency. I hope that isn't it, as I cleaned it quick and well, and it wasn't on the trackpad, and the keyboard works perfectly. The only thing I was doing when it first happened was video chatting via MSN (MSN gets my Mac hot, and I was worried it was the heat that did something, but IDK for sure). I only started using MSN about a week ago, and it gets my Mac really heated each time I use it. I did some searching on Google about this, but nothing quite like my situation. I haven't looked at everything, but, nothing yet.
Recently, my MBP's single-tap-to-select stops working, usually after I wake it up from sleep. This happens almost every other day, for the past 2-3 weeks (since 10.7.3 I'm guessing). Double-tap-to-right-click works fine, and keyboard commands all work, but single-tap just doesn't work till I reboot the machine. It's driving me mad. Even plugging in a mouse doesn't help, so it's not a trackpad / hardware issue at all.
I was in the middle of migrating my data from my pc to my mac (refurbished) and it stopped at about 3/4ths of the way. I want to know if any of the data was actually put on the mac or if it's an all or nothing transfer.
Here's a bit of a strange one, noticed over the last couple of days that the start up chime was getting quieter, then today no sound what so ever when turning it on.
Now from my understanding of it, the chime is a bit like a POST beep on a PC? Hear it once and every thing's fine? Otherwise the MBP is booting up fine, dual booting it and have sound in OS X and Win 7?!
Suspect I may have a HDD issue, as had to run chkdsk /f /r the other day and had to stop it after 12 hours as it was still on stage 4 of 5 @ 18%, and it seems to be running slower, also the HDD is becoming more vocal.
I'm going to run a full AHT on the unit, was just wondering if anyone else has come across something like this before?
I seem to have a problem with my ethernet port not working after a specific location change...I have three locations I used frequently. Let's call them:
1) HomeWireless
2) WorkWireless (used when I'm in meetings)
3) WorkEthernet (used when I'm at my desk)
My general practice is to change locations just before putting my MacBook Pro to sleep, and then it is happily ready for the desired network when it is awoken.I'm not sure what this change in behavior coincided with, but as of ~1 month ago, I am finding that going from WorkWireless to WorkEthernet, my ethernet port appears to be completely dead and I have to reboot the computer to reactivate it (yes, I've checked the cable itself and the wall port at they're OK). I've tried a couple ways of disabling & re-enabling it in software, but I don't get the impression anything actually resets this interface - suggestions are welcome as perhaps I just didn't try the right thing. I couldn't find anything quite the same as "networksetup -setairportpower" for the ethernet port.Oddly, this is not an issue with going from HomeWireless to WorkEthernet. Both HomeWirelss and WorkWireless have the ethernet interface deactivated in the Network pref pane, and perhaps the only notable difference between HomeWirelss and WorkWireless is that I use a static IP on the former and dynamic on the latter.
I'm having trouble with my new macbook pro where in some applications after scrolling down and stopping, I sometimes am unable to resume scrolling. I have tried shutting down the application, rebooting but nothing seems to work. Whenever this occurs I am still able to scroll fine in pages and safari but the preview app and xcode have been problematic for me.
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
