My recently coded app, is not opening in my iMac, the apps works fine in eclipse but when i try to open through desktop app it doesn't open. Since i'm new to iMac struggling a lot to resolve...
Info:
iMac, OS X Mavericks (10.9.4)
bought another (have one already) HP laserjet2100 with 600N network card exactly the same as an old one I had which works fine when connected to tiger macbook pro intel and old G4 with 9.2.2However when put new printer into ethernet network at first could not see printer but this was sorted using HP Direct and assigning IP adress on Intel mac. Howver when I print I get code on first page followed by masses of blank pages.To solve this I downloaded ghost and gimp printers and managed to get it to print.However quality is really poor when compared to old printes fonts are jagged etc. Any ideas to get it up to speed with exactly same machine?
View 6 Replies View RelatedI have a PPC iMac G4 running 10.5.8. Both in Safari and Firefox, some sites open right away (mail.yahoo.com, wellsfargo.com, apple.com). But others will not open or will take minutes to open (yahoo.com, mail.google.com, wunderground.com). Bizare for sure. Set up static IP address to find this mac on my network. No settings have changed since this system was set up a few years ago. Other PCs on my network work fiine. Also rebooted DSL modem, and router.
Info:
iMac, Mac OS X (10.5.8), Also HP Notebook Win 7 SP2
After updating to 10.7.3 I have noticed that Disk Utility no longer opens. It pops up into the utility bar for a few seconds, bobs up and down a couple of times, then disappears. The next time I click on Disk Utility I don't even get that much of a response. It just doesn't open. No error report, no pop ups saying that it can't be opened - Nada. I can't use disk utility AT ALL anymore. I've tried Zapping my PRAM, but that's about it.
The other thing I've noticed is that any time I put something into the Trash Bin it automatically tells me that it will delete the item - it doesn't sit in the trash bin like it used to until you manually delete it. The only time I can get it to behave normally is when I am using an external drive and I put something from the external drive into the trash bin.
Info:
MacBook Pro, Mac OS X (10.7.3)
I got a refurb 500gig Time Capsule for Christmas, and was able to set it up fine with my iMac, but when I tried to set it up with my Macbook Pro that I use through school it wouldn't show up/mount via wifi or USB. When I tried with my moms Macbook just to see, hers sees it fine.
I have a feeling its something to do with the image the school uses on the machines, but when I emailed IT, they said "Typically the images that are set up for each program are just a collaboration of programs required for you to complete course work in your specific program. There are no specific permissions turned on or off that would not allow you to connect to this device."
I had my dad play with the router, but its not the issue because the other two machines can access the Time Capsule with no issues. I can give the Time Capsule its own IP in Airport, and it shows it as connected but still won't show it when it scans to set it up with Time Machine. I can ping the Time Capsule from both the iMac and Macbook Pro. The software has been installed on both machines as well.
I'm using my old gaming mouse (Logitech MX518) and when I push one of the bottons above the thumb area (MOUSE 5 I believe) it does the minimization to where it shows all the pages open on the computer and all programs running.. I've gone in the mouse settings and I still cant fix it. Any help?
View 1 Replies View RelatedThis is an odd one, My imac can't seem to recognize my airport card.The airport utility can't recognize any device. The network diagnostics recognize the internet with the green lights but the airport lights are red... My browsers are connecting to the internet and I am receiving email. The airport icon in the menu is blank and when I open the menu it says "Airport:Not configured"
View 1 Replies View RelatedMy Apple computer version 10.7.4 isn't sync'd up with my new I-Phone 4S Which I purchased lover the ast week sometime! I had iChat connected on my MacOX computer (version 10.7.4 ) before I bought the iphone last week... Now, when people dial me on iChat ...it rings on my cell phone and not my computer... How do I get it to ring on my computer too.Or if I can only use one device...I want it to ring on my computer!
Info:
iPhone 4S
Just as of 20 minutes ago, I was able to type, but then for no reason, my computer can't type. The strange thing is that when I use the control click, use the mouse, or use the f keys, it works just fine. I used onyx to clean my computer, which didn't work. I restarted my computer, which didn't work, and I tried to go into the Keyboard/Mouse panel, but then System Preferences quit for no reason.
View 6 Replies View RelatedAfter installing a recent java software update(Trojan horse) have not been able to open several bookmarked pages.
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
I have had my mac book 4 months, and it fell from my couch and cracked the case around charging port, computer works fine, just doesn't charge. Apple store says I need new logic board, how could such a short fall result in such a costly fix, couldn't it be the DC input board?
View 2 Replies View RelatedDoes anyone know of one that actually works? I've tried a couple and after pasting in the XML location of my calendar, they don't do anything.
View 1 Replies View RelatedWhenever I am trying to sign in Mac App Store, a message saying "connection failed" will show up. I have no problem signing in itunes with my Apple ID, so I know my details are correct. Internet connection works just fine over ethernet, with firewall turned off and there's no other third party app (little snitch) or antivirus program which may restrict the network access from Mac App Store. I restored the OS from internet few days back because of a kernel error. Now I need to sign in Mac App Store to download my iLife applications.
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm having a strange issue after upgrading to Leopard. When I try to open certain pages in Safari it instantly gives me the "Safari can?t find the server" message. When I try to open the same page in Firefox at the same time it opens normally. For many pages (like this one) Safari is working fine. My connection seems good and this is happening on reliable sites (currently Safari won't open apple.com).
View 24 Replies View RelatedThe Airport Card in my 2008 MBP 17" seems to work intermittently, sometimes when waking from sleep or restarting it shows up as "Airport Card not installed". Other times it will switch on fine. I phoned AppleCare (I have 3yr) and they made me reset the PRAM & SMC, which initially worked, but now it back to it's old tricks of not working. Not sure what to do, don't really want to send my MBP off for a week.
View 24 Replies View RelatedI have searched this forum and the internet. My number pad on the right side of my keyboard works with everything EXCEPT the calculator. What did I do? cannot find anything anywhere to address just that. The numbers work fine everywhere else.
I did all the jumps to make sure on the system pref and the mouse off, holding my tongue just right and jumping five times...hitting the option key five times, the fn button and the clear button. the number work everywhere but on the calculator.
I bought a MacBook Air in November 2011 so I haven't even had it a full year. It does fine when it is plugged in but it has just stopped charging.
Info:
MacBook Air
I'm running Lion on my 27 inch iMac, after rebooting everything runs good for a short while. Then for some reason when I try to open an application like iPhoto, or iTunes, or and external hard drive the system freezes up.I can still open up a browser such as Safari, or Firefox, but no applications not even the Finder. Yesterday, I ran a new Lion when rebooting my system but that didn't help. From the utilities I repaired the Mac drive.
View 4 Replies View RelatedI don't get this. My mom's white MacBook (Intel IGP model) showed an X across the battery like it doesn't work, so I bought her a new battery for it. However, I installed the new battery and it still shows an X but it actually does work. I figured it out by accident. I thought maybe I bought a bad battery. I tripped over the magsafe and the MB stayed on... confused, I am now here. Not finding much about this.
What causes OS X to display an X across the battery icon? Doesn't this usually mean the battery is ruined? When pushing the button on the bottom of the battery, it shows five LEDs as it's fully charged and working. I unplugged it several times, and the MB stays on.
It also reduces the screen brightness and seems to go into battery power saving settings when unplugged. So how do I get OS X to see the battery? It must be charging properly as it's not hot or bulging or anything at all.
The problem is simply that it's not showing the battery information at all as though there were no battery plugged into the MacBook. But it works as though it's plugged in and all is normal?
I found this iBook in my dad's attic at his business. He said he had bought when they released and planned on using it for financial stuff, but figured his Windows laptop would do better. It was in its box BTW, not collecting dust.
Anyways, it's out of warranty and it's specs are:
1.07 GHz PowerPC G4
768 MB DDR SDRAM
Combo drive
12" screen
30GB HD
The combo drive is not fun. It takes a good push, no shove, into the slot for it to go in. It reads it fine and all, and can burn CD's, but pulling it out is plain horrible. I can't just take it and pull it out, I have to have my dad hold the iBook, and I grab the CD and pull it out. The CD ends up having deep scratches and is unreadable from then on. What do I do? Replace it? Or is it repairable?
i have a problem with my bootcamp. I had installed all of the drivers and everything works fine excepts the wireless connection which is very slow. I had internet connection but it is very very slow and thats not right... i installed the 2.1 drivers from my Mac Disc. Any suggestions how to fix this ?
View 6 Replies View RelatedSo I have a macbook pro 2.66 ghz, purchased in august 2009, and recently i have been experiencing the trackpad missing a couple taps when i try to click on something. i sometimes restart it and uncheck and recheck the tap to click in settings, but it eventually does the same thing.
I found this update at apple.com: URL
Which perfectly describes what im experiencing. Unfortunately this install is not for my "computer".
Is there anyway I can override the notice?? and if anyone has experienced the same thing, what did u do to fix it? Since it happens every now and then, i feel like if i were to take it to the genius bar they would just laugh at me...
I've got a G5. After a short while I turn on the computer, the computer will freeze.If I boot in Safe mode the computer is working fine. I removed few items from the start up,I used disk utilities to verify and repair permissions, but no it keeps freezing when I start up normally.
View 2 Replies View RelatedAfter restarting, Safari suddenly doesn't load any webpages. It shows all the top sites in the favorites area and actually updates some to the most recent versions, but when you try to get to the site it shows the loading bar to about an 1/8th of the way and then just pin wheels. Firefox works fine. I have used the reset to no avail. Have the current version and have been running it for a while with no problems.
Info:
Mac mini, Mac OS X (10.6.8)
I have got a macbook pro and an iPhone5 .. my macbook and my iPhone connected to the same WiFi but for some reason the airplay don't work .. so I tried to use a (cable) goes from the router to the macbook .. and i turned on (sharing internet) so my macbook can become a WiFi .. from that my iPhone is connected to the WiFi (macbook pro WiFi) and the airplay was working fine .. the thing is i don't like the cable idea because my router on the first floor and my macbook on the second floor.. so any one have any tips for me .. by the way i need the airplay because i was streaming using (Reflector)
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
wondering why the remote works fine and then stops when I connect a projector?
View 2 Replies View RelatedMy imac is around 4 years old and has been running both windows bootcamp and os x snow leopard for at least 3 years without any problems. My default operating system is mac and when I tried to turn it on this morning it gets stuck on the white screen with the grey apple icon and the loading icon spinning. Also a bar appears below this that I have never seen before. I have tried opening the mac in recovery mode but it does not respond and goes to the same logo screen.
I have tried holding the 'D' key down while the mac comes on and doing the apple hardware test but once the window pops up it does not complete the probing and appears to freeze just before its completion. I have also tried booting in safemode but the script stops at these commands:
-launch tl: Please convert the following to launchd: etc/mach_init.d/dashboardadvisory.plist
-launch_msg(): socket is not connected
However, the windows bootcamp is working fine and I can access my mac files from there.Also worth mentioning is that it is not a grey screen that appears on start up it is just the normal apple icon screen.
Info:
iMac (21.5-inch Mid 2010)
My wi fi iPad works fine on wireless home network but the Mac will not connect to internet even through airport diagnostics shows connectivity ok, how can I resolve?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1.1
I am attempting to acces a website that uses the Java application. I am running the latest version of Java on FireFox and certain fields within the Java application cannot be typed into.
Info:
Java
I keep getting a pop up about a java update but not sure whicj I am to use.
Info:
iMac (24-inch Early 2009), OS X Mountain Lion
