I have an imac 10.4 that i would like to put in my kids room. It is not airport compatible, nor hard lined. How can i get wireless to that imac. I have the airport extreme and express.
View 4 Replies
AirPort Extreme 802.11n Wi-Fi wireless networking;2 IEEE 802.11a/b/g compatible
Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology
To make a long story short, I moved to my girlfriend's place yesterday and I plugged in my iMac (20" 2.16 Ghz Intel C2D, 2GB RAM, ATI Radeon X1600/256MB VRAM) and I've been trying to connect to the Internet. Now, I couldn't have my iMac plugged directly were the router is located. Back at home, I never had any problems since I had my ethernet cable plugged into my iMac.
So this was my first time trying to connect via wireless or Airport (if that's even the same thing). Basically, I choose the network to log in and typed in the WEP key. I didn't get an error message so I assumed the key was fine. Also, it says that I'm connected to the network I'm on. However, when I try to get on Safari or MSN or something says I'm not connected to the Internet.
just converted and purchased a 21.5" iMac this weekend, he took advantage of that rebate offer on printers and picked up the black HP wi-fi printer. Anyhow he does not have an airport extreme or any type of wireless router since his iMac is right next to his modem, so he is using Ethernet.
So I tried setting up a wireless network using his internal airport card in his iMac and this worked out great i enabled internet sharing and printer sharing. For some reason when i try to connect his printer with his network it says that the network is not within reach even though the printer is right next to the iMac. Am I doing something wrong? is there something I'm missing? I know the wi-fi network is working properly because he is able to connect with his iphone and I was able to connect with my MBP.
I have had my iMac for roughly a year and a half. I currently do not use a router, i know i need to change that, especially for security reasons. Anyway, the airport/wireless has always worked but recently for maybe the past month it has failed to connect, i am wandering if there is a way i can check to see what's gone wrong? or any instructions/tips to help me figure this out.
I have been using my airport card in my iMac to share internet wirelessly with my iBook. However, I am unable to share the internet wirelessly with a friend's windows laptop. Her computer sees the network but does not ask for a password and fails to connect.
View 1 Replies View RelatedI recently moved and am connecting my iMac (2006 Intel) via the internal Airport card to a high-speed cable network here at home.
For some reason, my connection started off fine but after a few hours (sometime minutes) of browsing the web, the connection will slow to a crawl or just stop completly.
I've tried changing the DNS settings, turning Airport off/on, re-booting the wireless router (it's a Netgear) all to no avail.
The connection will seem to be okay and then...back to the molasses slow or no connection at all. At my previous residence, I was connecting the same way without any issues.
As an aside, there are 2 iPads, 2 iPhones and a MacBook Air all connecting to the same network without any issues whatsoever.
Info:
iMac, Mac OS X (10.6.8)
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies View RelatedI have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
View 5 Replies View RelatedWhen I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
View 4 Replies View RelatedI want to fully convert to the apple eco-system but can't afford the new airport extreme right now. Model number of the used airport is EbM8799LL/A
View 8 Replies View RelatedI don't understand something very basic about the internet...
I have been using a 2WIRE wireless box plugged into my phone line/DSL for four years. I knocked it over and it doesn't seem like it is broadcasting a wireless signal anymore, so I bought an Airport Extreme Base Station, 2007 square model used.
I don't understand how to set it up... Can't I just throw away the 2WIRE thing now? When I try to use the Airport Extreme thing, it does not recognize the internet DSL signal or something.
I just want to use the Airport Extreme as a dsl wireless router alone.
I don't want the 2WIRE thing. The 2WIRE thing is usable when I plug my ethernet cord into it, but it is no longer broadcasing a wireless signal.
How do I set up the Airport Extreme with my DSL for wireless?
Sorry this is so stupid. I just don't understand what to do at all.
I just bought an Airport Express (Version: 6.3) And i tried installing it via the airport utility with no success. After several tries i got the Airport Express to install successfully but the blinking light on the Airport Express was flashing yellow. I know it was working because i was able to stream music via itunes to my Sound System. Everything was working fine, even though light was still blinking. I restarted my system and now it wont read my Airport Express?I also have a Airport Extreme Station (for wireless HD purposes) which i installed myself and have had no problems with, so i know im doing this right...But i just cant get this express station to work
View 1 Replies View RelatedWe've just moved house and signed-up to O2 Broadband. They've supplied a Thomson wireless box that plugs into the phone socket. This box, however, doesn't work with my Apple TV or Airport Extreme/Airport Disk. I've tried to make my Extreme 'extend the network' but it says the network cannot be extended.
How can I ditch this O2 wireless box and get back to my Apple-based network (considering the broadband enters my house through a phone socket rather than a Cat-5 ethernet cable that the Extreme can accept)? I want my AppleTV/Airport disk back as I had in my old house!!
Can an airport express be used to add wireless to a PC with the ethernet cable? I have an existing wireless network and I want to use the airport express rather than a usb adapter to add wireless to my PC to join the network, is this possible?
View 2 Replies View RelatedI would like to install an internal airport card in my Mac pro (2008) as I didn't order the wireless BTO option and the USB adapter I tried instead didn't satisfy me. When I asked for the card at an apple reseller they said to me that this upgrade would cost a lot of money because they haven't only to order the card but they have to install the antennas as well. I went home and checked the interiors of my machine and saw three antenna cables (labeled with 1,2,3) which seem ready to be connected to an airport card. So I don't know if I have to believe this antenna thing. Are the antennas already preinstalled in every Mac Pro or do I really have to bring the whole computer to the store?
View 13 Replies View RelatedI really like my wireless desktop but want to have access to either my self powered Toshiba HD or the Western Digital 500GB MyBook. I don't want to give up wireless printing but only have one USB port to work with. Can I use a powered USB hub to act as a port multiplier and access both my printer and HD?
View 3 Replies View RelatedI have a Time Capsule as my main wifi router and have extended it to my upstairs using an Express.
View 1 Replies View RelatedI have a linksys wireless system set up in my home right now, but am trying to extend my wireless range to a few more rooms. I have tried to set up my Airport Extreme Base Station as a remote and have the linksys as the main station, but it doesn't seem to be working. Does anyone know if this is possible (i.e. have the linksys as a main station and Airport Extreme Base Station as a remote)? One a similar note, even after resetting the Airport Extreme Base Station and connecting it directly to the DSL modem, I cannot connect to the internet. The computers connect fine to the wireless network, but the internet will not load.
View 1 Replies View RelatedMy powerBook has no problem connecting, but the Airport Admin utility for Windows XP can't "see" the base station.
Clicking "Start" then "connect to" and then "show all connections" and then the name for my Airport network, a "choose a wireless network" screen comes up, a strength meter (all bars on) displays, and a reminder that a network key is required. Clicking "connect" on this screen shows a "wireless network connection" thingy -- but it never actually connects.
Have a Belkin Wireless G Notebook Network Card in a Toshiba 2430:(URL)
I just got a 17" Powerbook G4 1.5 Ghz. My friend that sold it to me said that her wireless always had a really weak signal but in recent time, unless she was in the same room as the router it was really hard to get a decent connection. She said she took it to an Apple store but her Apple care was expired and they said they'd have to send it out for 5-7 days. Today I just tried it out at home, where I normally (as well as everyone else in the house) have full signal from our router, this computer gets a bar or two max.
I was adding in some more RAM to it so I figured I'd take it the rest of the way apart. So, in doing so carefully because I could not find a diagram at all that matched this computer, I found that there is not a Airport Extreme card in the computer at all. Is that right? Is the wireless built in now? (or maybe for that year). Is this a common problem that the signal fades?
I no longer have any wireless devices in my house and I'd prefer not to have wireless active. When I go to the AEBS admin utility, the best I can see to do is reduce the signal strength to 10%. Is there a way to shut of wireless altogehter?
View 12 Replies View RelatedI can't get my Airport Extreme to work w/ any of my PCs (via wireless). I have an Extreme N w/ gigabit and using WPA/WPA2 security. Latest firmware. My MBP works perfectly fine, so does my iPod Touch and even my printer which connects via WiFi also (hp Photosmart D7460).
However none of my PCs can connect, I already tried w/ 2 different Dell laptops a Toshiba laptop and a desktop. All are running XP and have all the updates etc. All connect and work fine to my Linksys WRT54G.
Is this a known issue with the mac pro or do i just have the wrong wires connected?
I've got Wire 1 connected to bluetooth and wires 2 and 3 connected to the airport card.
I have a MediaSmart Server due on Friday. I have an iMac, MBP, MB, and two PC's using an Apple Airport, how should I connect the MediaSmart Server EX485 to my airport, wired or wireless? Is there a performance difference between the two setups?
If wired offers best speed then I can easily do that as they will be near each other.
I am sorry, whats the difference?
View 1 Replies View RelatedRecently my Macbook OS X 10.5.6 has been making the wireless internet in my house stop working. It will happen randomly and I have to unplug my router and modem every time it happens. I know it has to do with the my mac because the other house desktop computers work fine when the mac isn't turned on and not connected to the internet. I've been finding a lot of people have been having the same kind of problem with airport.
View 7 Replies View RelatedI have a few questions about using a airport express as a wireless bridge to my tv room.
1. I want to use my airport express as a wireless bridge with my att 2wire router. Would there be any issues or would that work
2. I need to have 3 Ethernet ports but the airport has one would i be able to hook up the airport express to a switch to get the extra 2 ports.
3. Would I be able to do the wireless bridge and stream music at the same time.
The att 2wire is the modem the airport would be the bridge in the tv room and would be hooked up to a xbox 360, Slingbox Pro HD, and a directv HD DVR.
First post so bear with me. I use a 1Tb Time Capsule as my wireless router. On the other side of the room I have (wirelessly connected) my PS3, TV, Wii, and a Helios network media server. These are not all wireless N devices.
I also have a previous generation Airport Extreme.
Question. Can I wirelessly connect my Time Capsule to the Airport Extreme (on the same side of the room as the PS3, etc.) and then connect PS3, etc. to the Airport Extreme via the ethernet connections ?
If this is possible would I (as I hope) get better network throughput as the only wireless connection would be at N speeds ?
All of our Macs when first started begin Airport scanning. They log in to an unsecured network from a neighbors home instead of the network we have set as preferred. We then must select manually from the list of available networks which is quite a lot in our community. Why is this and what can we do to stop this?
View 1 Replies View Related
