I've got an iMac 233 and I'd like to reinstall OS 9. My only problem is that I don't have an install disc. Can I make one i.e. with the system folder or something? Also, the optical drive is a bit flaky so could I install from a flash drive or external HDD?
View 2 RepliesI have older OSX versions that are on disc in addition to some older software. I want to have these files stored for when I need to make another boot disc or an install. I want to have them as .dmg files. I guess that is the default that you can open on OSX, add the serial number and install?
Can I use the OSX operating system to make these? I also have toast 11. Can I do the same thing?
Info:
iOS 7.0.6
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedI would like to clean out my HD and reinstall OS X 10.5.8 Leopard, but I do not have the original install discs. My plan is to buy the Mac OS X 10.5 Leopard universal retail disc from an outside dealer (going for $200+) and also buy additional memory (2GB 533MHz DDR2 SDRAM (PC2-4200)) to help with space.
I am worried about not being able to run QuarkXPress 6.0, Extensis Suitcase X1, Microsoft Office 2008, and Adobe Creative Suite CS3 once I reformat. I do not want to upgrade to Lion because most of these programs do not work or in the case of CS3 very glitchy on Lion.
is this the best route to go? I do not want to buy leopard and the ram, until I know for sure this is the right way of proceeding.
Info:
iMac, Mac OS X (10.5.8), 512 MB
I just bought the new 24" iMac and I looked at the backup discs and they said it could install OSX Tiger. I also have an old iBook G4 I got my moms friend who moved. I know the iBook could handle 10.4 as it has 10.3.9 now but what I was wondering was. If I could install the OS on the iBook from the iMac backup discs. I but the disc in the iBook and it wanted me to restart to begin the installation of OSX but I quickly backed out. Do you guys think If I proceed with the installation it will install smoothly or, should I just forget about it.
View 2 Replies View RelatedI'm purchasing a new MacBook Pro in a couple of weeks and the install discs will be Snow Leopard.
At home I have a 2009 Intel iMac. Will I be able to use the MacBooks install discs to upgrade the iMac or do I need to buy iMac Snow Leopard separately?
I came home for vacation and decided to reformat my imac g5 to get a fresh start. I backed up all my files, took out my leopard retail box, and was ready to go when I opened up the box, and noticed no disc. I have no idea where it went.I have the install discs from the computer when i got it, but it only has 10.4, so id rather not use them. I have the install discs from my macbook pro with 10.5, but I am pretty sure it will not work.So does anyone have any suggestions? Should I just go ahead and install 10.4 until and then just install 10.5 when i find it? (i really hate doing this, I hate having more than one version of an os installed)
View 2 Replies View RelatedI have an old G4 system with Pro Tools recording software and related Plug-Ins installed and running flawlessly. Bad news is that the drive is about 9 yrs old and I want to make a backup before selling it to someone so they can have a bootable backup drive instead of having to re-install the whole system if the internal drive craps out.
The OS is 9.2.2. It is not classic and has no version of OS X on it t all.
How do I make a bootable clone of the whole system discs, apps an all, to an external firewire drive?
I just purchased a mac pro about 4 months ago and I love it, I have never had a problem with it until today, I went to install a new program on it and it did not even read it, it made a hi pitched sound for a short time then stopped, waited about 10 seconds did the same thing. After a couple times of doing this it would eject the disc, so I figured I would try another disc, I have tried many different discs such as games, cds, programs and nothing has worked.
View 7 Replies View RelatedI am traveling and I forgot to get my Mac OS X install discs with me. I have a Early 08 MBP 15 inches, 2.5 GHz. Will the install discs that came with a white MB be the same for the MBP?
If not, where can I get new install discs?
I have a Macbook that was bought new earlier this year and an older Macbook Pro (original Core Duo) running older OS (10.4.11) with iLife '08. Can I use the MB's install disc to update my MBP OS+iLife? I'd like to buy Aperture for my MBP, but now need to update my OS first... guess should have bought Ap 2.0 last year.
View 1 Replies View RelatedI have bought a used Macbook Intel 2.2Ghz 250Gb with 2GB RAM running Snow Leopard. It didn't come with system discs. I have a similar Macbook with a 160Gb HD running 10.5,8 and I have swapped the HDs over. Both machines are running fine. I now wish to reinstall 10.5 on the 160GB HD but when I use my original 10.5.6 system discs it says that OSX cannot be run on this machine.
View 2 Replies View RelatedI've got an aging powerpc iBookG4 that came with OSX Panther (10.3)... time's taken it's toll on the old thing and it needs a refresh. Problem is I can't find the install discs, would I be able to use the install discs that came with my intel MacBook? I think buying a copy of Leopard would be too much for it.
View 6 Replies View RelatedI wanted to install 10.5 on my Mac Mini G4, the only copy of 10.5 I have is for my Macbook, would I be able to install it using those discs or even using the new remote install app?
View 5 Replies View RelatedJust bought a Power Mac where the drives were wiped and may not have an OS X disc with it. Can I use the 2 discs that came with my Macbook Pro? They are OS X.
View 3 Replies View RelatedI have 13" MBP Mid - 2009 bought July '09. My computer started with a ? folder flashing the other day, and I can't get Leopard or Snow Leopard to reinstall. My computer has crashed before, and I ended up somehow getting Leopard to install. I have time machine backups of my data. I tried erasing and reinstalling both Leopard and Snow Leopard; I've tried re partitioning and reinstalling both Leopard and Snow Leopard; I've tried Zeroing out the data then installing and no go either. Any Ideas?
When my computer crashed before, I thought it was because of faulty snow leopard upgrade installation (installed then crashed a month later). I called Apple and they sent me a new Snow Leopard Disc. Before the disc arrived, I finally got Leopard to install. I waited till I got an external hard drive to back up my stuff before I installed snow leopard with new disc. Well, I installed snow leopard the week after christmas, and now a month later it did this again. I tried all that I told you in the above paragraph. What is wrong with my computer? I really need it cause its the only mac I have and I have papers I need to turn in that are on my backups!
I recently decided to reinstall my xp on my boot camp, however, my superdrive in my MBP is not functioning at all, so I browse around and find that it is possible to boot windows setup via USB Then I partitioned my Mac drive to split a 70gb space for bootcamp After a lot of works, i finally finished partitioning the drive and got to the stage where I need to install XP from my USB flash drive
I downloaded refit so I can boot from my usb, but the thing is, when everytime I boot from the usb, it says "Non-system disk-press any key to continue" then I tried to format the usb using VMware following this instruction, [URL] When I tried 'list disk' ,my usb isnt seen as a disk, but a volume so I tried 'select volume 2' then 'clean' it just says 'No disk selected' so I am stuck on that stage. Then I tried using a software called 'WinToFlash' which apparently would automatically format the usb and make it bootable but it still has the same error. how to create a bootable USB flash drive to install Window XP, with instruction
I just sold my 15" PB and want to reformat it for the new owner. I lost the original install discs, but I have a legit retail version of Tiger just for this machine. Can I do the hold down 'C' thing, or is there something special about the original install discs?
View 2 Replies View RelatedI would like to install worldbook 2004, which came with my eMac on my Daughters mac mini.
The eMac died a death a few years ago, but I still have all the discs.
Obviously I cannot restore the software,(its Panther),but I guess I should be allowed to use it as I bought it bundled with the eMac.
I still have the world Book disc too, but it wont install from there, It says it needs to be installed from the eMac Software Install DVD's
Can anyone tell me how I can extract it ? Or a reason my I should not be allowed ?
My mother bought a MacBook with Leopard and iLife '09 recently. Can I install Leopard and iLife '09 from the discs that came with that on my iMac?
I had assumed not, but the guy at the store said I can.
how to get replacement install discs for an older imac? I have a 20-inch 2.0Ghz 1GB ram, 250GB imac (vintage 2007) that I have misplaced the original install disks and I need to wipe it clean and re-image the whole system.
Info:
MacBook Air, Mac OS X (10.5.8)
I have a 24" iMac (A1225). I can boot to non-Apple discs (utilities, Windows) and I can even install Windows without any problems. I can't boot to any OS X Install disc however. I have the original 10.5 discs, they don't boot. I have a 10.7 disc that does the same. It starts to boot and makes encouraging noises for a bit but eventually both discs spin down with the Apple logo and the spinning circle which stops.
Just for shiggles I tried to boot a couple of custom OSx86 discs (10.6.3 and 10.6.6). They both booted to the installer. 10.6.3 started installing (crashed half-way) but started to boot from the HDD after I restarted it (it didn't go anywhere of course, just the Apple logo). 10.6.6 finished installing but wouldn't boot after it restarted.
It seems like there's a hardware issue but the fact that I can boot non-Apple discs and even install Windows without issue makes me doubt that. I have also cleared the PRAM (Option-Command-PR) and ran a quick test in AHT (D) without issues.
Info:
iMac, Mac OS X (10.5.8)
I found that I need to re install everything on my computer, and I'm buying the final cut studio 3 upgrade version, but my main install disc for FCS 2 is damaged. Do I have to install FCS2 first to install the upgrade? Or can I use the upgrade discs for a clean install? I haven't used an upgrade kit before.
View 3 Replies View Relatedwhere i can get the Original install Discs for my 2.16GHz macbook? I don't know where to start looking, so can anyone lend a hand?
View 7 Replies View RelatedI have a Mac mini running OSX 10.4.11 that I purchased second-hand. It did not come with the original install discs. I want to give it to my grandson now that I have a new i-Mac, but cannot figure out how to remove myself from the Admin position and substitute him.
View 1 Replies View RelatedHowever, I don't have the iBook's system discs because my mother lost them (she was using the iBook until I gave her my MacBook).
I called Apple to get new system discs, and they sent me an OSX 10.5.6 Retail Install DVD to install on the iBook, but this doesn't include iLife.
Obviously it's not the end of the world if I don't include iLife (even if it is iLife 05), but I think it would help me sell the iBook if iLife was included.
I just got off the phone with Apple support and I was told I should bring in my iMac to an apple store to get it checked out. However, I am EXTREMELY busy. So in the meantime I was wondering if anyone could help fix this issue: I have a brand new iMac literally purchased a month ago, 21.5", when I insert a disc it keeps it for about three seconds and pops it right out, the disc does not even register with my computer. Is there anyway to fix this without having to go all the way to the Apple store (I don't own a car).
View 11 Replies View RelatedI just bought a 21.5 iMac and am having a great time. However, the iMac will not take in any discs. When I try to put it in, the iMac doesn't automatically pull it in. I tried putting it as far as I can and waiting a long time. I've even had to use a credit card to get a stuck disc out after pushing it in too far.
View 2 Replies View Relateddoes a doublelayer disc work in an iMac G4/800 17" with the original built in superdrive? I want to burn a dl-disc with 7GB on my macbook and give it to a friend who owns that machine.
View 2 Replies View RelatedI was burning a few discs the other day and noticed that my iMac is leaving ~1cm curved scratch marks around the middle of the disc (ie, about equal distance between the hole in the middle and the edge). It won't do it every time, but I'd say about 50%. Anybody have any clue what's causing the scratches?
View 1 Replies View Related