Windows On Mac :: Run Windows Server 2003?
Sep 1, 2006if this will run on an Intel Mac? Is there any reason to think it wouldn't, assuming I installed all the right drivers, etc...?
View 9 Repliesif this will run on an Intel Mac? Is there any reason to think it wouldn't, assuming I installed all the right drivers, etc...?
View 9 RepliesI've tried typing some search terms for what I think I want to be able to do, but I'm getting nothing relevant- I figured I'd just spell out my problem on the forums and see if there are any solutions. I work for an EMS organization that has several windows workstations (running xp) that connect to a larger server, which hosts our shared drive ("U") as well as windows specific programs for generating reports. Specifically, one of our call logs is a microsoft access database that is linked via our network to generate a specific reference number for our calls.
Now, I'm moving up in the world and going to be directing human resources and pr for the agency, and while the windows workstations are nice, I am a damn fine mac user and would love to use my unibody 17" pro for the job. Here is where my questions come in. I'd like to use my mac running virtualbox, parallels, or whatever with an xp install to connect to the server and have a typical workstation desktop (the U drive, network attached programs) next to my osx desktop. I know macs can access shared drives on server 2003, but can I set up a virtual machine to emulate one of our workstations?
I have a Windows Server Standard 2003 that i use as a file sharing server. Simple Workgroup, not a domain environment. I have two Mac pros that have intermittent connection problems to the server.
View 1 Replies View RelatedAfter some searching, I've seen three tricks: disabling IPV6 on the Mac, doing the same on the PC (my Windows Server 2003 installation didn't have it installed), and adding a line to my /etc/smb.conf file. None seem to really give me full transfer speeds.
Are there any tricks specific to Windows Server 2003 or anything new to make this work like normal? It's simple file transfer over SMB, seems like at the 5th iteration of Mac OS X we'd have better speeds.
One day the users started to complain that the mac we have can't login to the domain so I sat down for 30-45minutes trying to figure out what had caused it - only to figure out that it was simply because the time was off by 5 minutes so the domain controller refused the connection. Is there a way to syncronize the time?
View 2 Replies View RelatedHow To Connect Mac Os X 10 5 5 To Windows Server 2003 Domain
View 2 Replies View RelatedEverything works great as long as I'm under 31 characters.
I'm running Mac OS X 10.6.8. Is there a default setting on either the server or the Mac to allow for this to happen?
Info:
Mac OS X (10.6.8)
I can successfully connect to my work server (Windows 2003 Small Business Server) using the built in VPN utility. That isn't an issue.
However, once connected I have no way to navigate the file system to be able to copy and paste files between our server and my MacBook Pro. I'm not sure why.
When I'm in the office and am connected to our network via ethernet cable and connect to the server via VPN, the different drives show up in the Shared section in Finder.
However, when I connect remotely from home those drives don't show up in Finder.
I am converting from a Windows system to a Mac. The mail client on the Windows box is Outlook 2003. The mail on the windows box had been previously stored in a number of PST files using POP3. The recommended procedure to convert to the Mac is to first in Outlook 2003 convert from POP3 to IMAP. While in the middle of this procedure I got a message that the PST file that Outlook 2003 creates for the local IMAP store is full. Further, it is 97-2002 format file rather than the new type used as the default in Outlook 2003. In any case, I need to get the rest of the mail converted. Another issue is that viewing specific folders in the IMAP store on the Windows box results in an initial display of items, followed by the window being cleared, and the folder size function showing that the folder is empty. However, attaching to the IMAP store on the server from the Mac Mail program still shows the contents, so I think this is an anomaly of the poor implementation of IMAP in Outlook 2003. What do I need to do to get the rest of the POP3 mail into IMAP?
View 2 Replies View RelatedOffice equiped mixed computers , aslo Windows and Mac, Could we use MacMini server for both machines, working by windows apps and / or to save and work with windows files on MacMini server and with Mac as well?We woud use it for normal office work and get it by internet from other places as wellwindows apps: merchandising, invoice, word, excel, pictures editing, Outlook Express + the Mac apps
Info:
MacBook Pro, iOS 5.1
I have seen other posts and I'm concerned that I didn't have all the info that I need. I would like to install Windows Server 2003 R2 64-bit on my IMac at home using VirtualBox. VirtualBox is like Parallels or VMware and is free. Where is the best place to get a Windows Server install disk and is there anything that I should look out for when installing it on my IMac?
View 4 Replies View RelatedI've recently bought a macbook and I love it, but am trying to connect to my outlook server and having a few problems. Firstly I can't access OWA through Safari at all, every time I type it in it says 'Safari can't find the server' - it is sbs2003, and this works fine in IE Ideally I wanted to set up access through Mail or Entourage (2008) however I've read that it is not possible to connect to exchange through this. Frustrating as I have just bought this and have a free upgrade to 2011 but only home and student so apparently this won't have outlook on here either. I have been trying to connect for days and I just can't figure out the best way to get to my emails? if you could point me in the direction of a good walkthrough that would be great.
View 1 Replies View RelatedI've searched high and low and can't find any reports of running Server 2003 on a 2008 Mac Pro via Bootcamp, 32-bit or 64-bit. Has anyone done it? I found a few instances of people having trouble getting it running on MacBook Pros and other systems. I also found an article on a workaround to do it on a MacBook: [URL] Even the 32-bit version of Server 2003 can handle 32GB of RAM via PAE and I have several licenses for it.
View 5 Replies View RelatedI'm just posting for the archives my success with installing Windows Server 2003 R2 with SP2 Standard Edition on a Jan 2008 Mac Pro (8x2.8 GHz, 4 GB RAM). I've installed Server 2003 a Mac Mini (1.83 Ghz), MacBook (Late 2006) and an iMac (early 2008) and didn't find the information available online to be greatly helpful, so hopefully this post will help somebody like me sometime in the future. To set up Windows Windows Server 2003 R2 on a Jan 2008 Mac Pro:
Boot OS X and run Boot Camp Assistant as usual. Install Windows Server 2003 R2 SP2 as usual (comes as 2 discs, but only requires the second disk upon your first successful log in so this isn't a problem with bootcamp). Eject the Windows installation CD in the windows explorer by right clicking the D: drive and selecting Eject.........................
I'm trying to connect my Macbook pro to our Exchange Server 2003 via Entourage. Entourage is asking me for the "LDAP" information, and cannot complete setup without it. But our server doesn't use LDAP configuration.
View 2 Replies View RelatedOur work uses Small Business Server 2003 and I'm trying to figure out the right settings. Any guides on connecting to SBS 2003 using Snow Leopard? I only need to be able to access the Internet. I don't care about connecting to others computers.
View 1 Replies View RelatedI read this article which explains that Exchange Server 2003 is actually supposed to work: [URL]
Exchange Support
Apple has built in support for Microsoft's Exchange Server 2007. This is what, on a PC, pushes and synchronises all your email, contact info and calendar entries to Outlook and your phone. By doing this, OS X's Mail, iCal and Address Book apps sync up just like Outlook. Note that if your company is still running Exchange Server 2003 (ours is), you will still be able to sync Snow Leopard with your office server. We confirmed this with Microsoft, a spokesperson from which said, "Correct -- it will work with Exchange Server 2003 as well." Our IT boffins here at CBSi confirmed this too. I know it's still early, but has anyone had any luck getting this to work? I'm about 30 minutes away from installing the $29 SL on my laptop. And I'm really hoping to have the ability to eliminate having a PC desktop on at work strictly for the connection to our exchange server 2003.
If you can stream the Mac as a media server on your PS3 just like how it does on Windows for Windows Media Player....
View 11 Replies View RelatedI have a Snow leopard server with a folder shared Via SMB for the 2 PC's we have, all the macs can read and write to this folder OK. About once a week the 2 pc's take 10 mins to start and then cannot connect to the share. Web/email and sharing betwen them still works. I can ping the server from both. I've turned off the smb and restarted it. Also tried restarting the Xserve. This still has no effect. All internal firewalls are off. I've tried guest access.
Info:
Xserve, Mac OS X (10.6.8)
I have problem with a clients windows laptop. It used to be able to connect to their companies mac server. But since he got back from a trip the laptop doesn't connect anymore. I can ping the server. And when I try to redo the network drive I'm prompted to enter my credentials. But whatever I enter it doesn't work.I already tried to use SERVERNAMEuser.... and also check security policies.
Info:
Windows XP
has anyone been able to set up an exchange account in Outlook for Mac 2011 with Small Business Server SBS 2003? Microsoft claim that Exchange 2007 or later is required but I wondered if there was a work-around.
View 6 Replies View RelatedI manage a small network of 15 users, and they all currently have PC's running windows XP Pro SP2. There is 1 accounting server running server 2003 SBS, and a File Server for the Lab running SBS 2003 SP2. There is 1 user who uses RRAS setup via VPN to connect to the files and work from home on weekends etc.. the laptop he has is brand new, setup and managed all his settings so that the environment will be easily manageable. Now, the problem is, intermittenly he cannot connect to the shares, the network goes down, the server hickups, it needs rebooting, its setup properly, everything is ok, it runs good, I upgraded the ram, to 4GB.
this happens waaay to much, and I spend way to much time fixing these issues over and over, from possible firewall issues on his laptop, that have been corrected, to just no connection getting through from him, when clearly most of the time the thing works. The server has not been tampered with at all, neither has his laptop, both systems are 100% virus/spyware/bot free............
I will be setting up Mac Server to support Mac Users in our environment. We have the Windows DNS Server and I would like to know How could I setup my WIndoes DNS Server to support Mac Server that will run Open Directory.
View 1 Replies View RelatedI Have setuped Windows 2008 Server and Windows 2003 Server. On both is full working Active Directory. The clients can conect to it (win).I would lice to have some Mac clients and will setuped Lion server an in Open Directory I have set to connect to another server. Then in Directory Utility I will set the connection to AD Server over Connect in File menu and I have only error mesage "Can't connect to the server - Directory Services may not be installed on the remote server, they may be turned off, or the URL may have been entered incorrectly." and then I try the connection over Services - Active Directory and have error mesage "Authentication server could not be contacted." too.
View 14 Replies View RelatedI'm considering adding another Windows Server to our network (Windows 2008 Server); however, I like the fact that OS-X Server has Spotlight Server and a Wiki, but I heard that OS-X Server may have some serious problems and glitches especially with SMB or file-sharing for Windows. I'll be using this server for our graphics production department which is a mix of OS-X and Windows XP workstations, and I'll be adding to it a multi Terabyte rackmount Raid-drive.Can anyone who is in the advanced Server know-how share some advice to weather I should continue with Windows Server or switch to OS-X Server and why so?
View 8 Replies View RelatedI've looked high and low for the answer to this with no luck. I've mapped a lot of my windows network shares at work on my MacPro running leopard without problems. However, I'm extremely stuck trying to connect to the last one which is located on a special DMZ (demilitarized zone) server.On my windows machine I simply use the ip method and I'm prompted for login credentials. It's important to note that the login credentials for this DMZ network share are different than my usual work domain login (the Mac uses that same login with no issues).
View 5 Replies View RelatedIs it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies View RelatedAre there any tools to remote control mac os x with windows?
View 7 Replies View RelatedI am thinking about getting the mac mini server for my fathers business. Everyone uses a Windows machines in his business, so I was wondering if anyone has this setup (with the back end being the mini). I was hoping people could let me know how well it works, and how they use calendars emails without outlook etc.
View 15 Replies View RelatedI have a Mac OSX Server (10.4) connected to a switch with various Airport Express terminals around the place. Macs can connect to the network wirelessly (with 128 bit WEP) and WIRED totally fine... but when I try and connect a windows PC either using wireless or WIRED... an IP address isn't assigned. Windows just says "Limited or no connectivity"...
View 5 Replies View Related