Windows On Mac :: Need To Run AutoCAD Choose Bootcamp. It Didnt Let Me Install It?
Oct 27, 2009
This is retarted. According to Apple when I got my new Macbook Pro, I shouldnt have any problem installing Windows that unfor tunately I need to run AutoCAD. I choose Bootcamp to use all the resources of my MAC. It didnt let me install it but did it with Fusion. How retarded is that. OEM disk SP2.Then I got to Apple store and explain the problem. Dude over there says it should work. Exchange my Macbook for a brand new one and lets try again.Now I cant even load the same disk with Fusion. I go back to the store to buy a case and ask the question again. Now the answer is...Bootcamp wont accept an OEM Windows disk unless you get a copy which was never use.
View 9 Replies
ADVERTISEMENT
Mar 1, 2009
I have been running vista64 through bootcamp and fusion so that I can run autocad on my late 08 MBP. The only issue I've had is that everytime I boot into vista I have to reactivate my autocad. It doesn't seem to matter whether I go in through bootcamp or fusion.
View 4 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Apr 10, 2009
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies
View Related
Jun 1, 2010
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
View 1 Replies
View Related
Sep 16, 2008
My sister has a 1.83 GHz MacBook and I have have an ibook G4.I use other some Mac programs, but I need to use Autocad on windows.Should I trade with her do be able to use Autocad. I really like my 12"ibook.
View 4 Replies
View Related
Oct 3, 2010
my parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
View 7 Replies
View Related
Feb 22, 2009
you cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies
View Related
Sep 3, 2009
Is there a way to install Windows on Bootcamp without it requiring you to enter the serial manually?
View 6 Replies
View Related
Dec 17, 2009
So I downloaded parallels 4 and set up a virtual machine with Vista (I couldn't get a copy of XP so I had to settle). I then installed an educational version of AutoCAD 2010, it installs and everything but when I open the program it begins loading until a point where it doesn't respond. I have reinstalled it, uninstalled it and installed it again, but the same exact thing happens each time.
When AutoCAD stops responding it says this at the bottom of the screen:
Opening: C:UsersAdministratorAppDataLocalAutodeskAutoCAD 2010R18.0enuTemplateacad.dwt
I don't know whether that is relevant or not. I read somewhere that to run AutoCAD 2010 on vista you need 2GB of memory. With parallels the way it is i can only commit 1GB of memory to vista. I was wondering if it would work on bootcamp where i can devote all my memory to windows. Is it even possible to uninstall parallels and all that and switch to bootcamp? If thats even possible would I be able to preserve my copy of vista or would I have to get a new license?
View 24 Replies
View Related
Apr 23, 2010
I have a Macbook pro and I'm running windows 7 as the operating system. I just started using Autocad 2010 on this computer, and for some reason, the "delete" key doesn't delete anything when I press it. I tried to set "pickfirst" to 1 (checking the box of "noun/ verb"), but it doesn't help. Setting them both to <0> and <1> don't make a difference, both options don't "delete" the selected object.
View 4 Replies
View Related
Sep 16, 2008
I have a 12" ibook G4, and my sister a 1.83 GHz MacBook. She says, she would be willing to help me, by giving me her MacBook in exchange for my ibook G4.My question is, is it worth it ?? Will it be fast ?? The only reason for this, is because I need to use Autocad on Windows. I mean, my ibook G4 is really great after three years
View 8 Replies
View Related
Sep 3, 2009
I downloaded parallels 4 and set up a virtual machine with Vista (I couldn't get a copy of XP so I had to settle). I then installed an educational version of AutoCAD 2010, it installs and everything but when I open the program it begins loading until a point where it doesn't respond. I have reinstalled it, uninstalled it and installed it again, but the same exact thing happens each time. When AutoCAD stops responding it says this at the bottom of the screen:
Opening: C:UsersAdministratorAppDataLocalAutodeskAutoCAD 2010R18.0enuTemplateacad.dwt
I don't know whether that is relevant or not. I read somewhere that to run AutoCAD 2010 on vista you need 2GB of memory. With parallels the way it is I can only commit 1GB of memory to vista. I was wondering if it would work on bootcamp where i can devote all my memory to windows. Is it even possible to uninstall parallels and all that and switch to bootcamp? If thats even possible would I be able to preserve my copy of vista or would i have to get a new license?
View 6 Replies
View Related
Oct 16, 2010
Well basically I tried to install Windows on Bootcamp, and long story short I have to completely reinstall OSX. When I put the Snow Leopard disc in, I try holding either Command-Option-Shift-Delete or just c, and neither methods work. It always tries to boot from the HD, in which case I just get the spinning circle for ever. Why wont it boot from the disc?!?!? I also tried plugging in an external dvd drive, and it still wont work....
View 15 Replies
View Related
May 6, 2009
I was trying to install Windows 7 via Bootcamp last night - all went well until Win7 started up - it wanted me to type a Username for the default user. However, I have a wireless keyboard & mouse, and these didn't appear to be recognised (I think I might have to pair them later??). I had to abort the installation by hard resetting. Any way around this, without buying a wired keyboard & mouse?!
View 3 Replies
View Related
Aug 30, 2009
do I have to install a 64 bit windows on my bootcamp mac pro partition? Will regular xp be unstable? Which windows 64 should I get? Xp or vista?
View 2 Replies
View Related
Sep 17, 2009
I've installed Windows 7 64x on my Macbook, now when I insert the Mac OS X disc that came with my Macbook I can install the Bootcamp64 file but when I insert the Snow Leopard disk to install Bootcamp 3.0 I can't install the Bootcamp64 or the 32 bit Bootcamp file. I really want the 3.0 version so that I can have the read capability for the Mac partition in Windows. When I try to install the Bootcamp64 it comes up saying "This installation requires elevated privilages. Launch the installer through setup.exe" When I run it through setup.exe however it comes up with the message saying that it Bootcamp64 is unsupported on this model. The same message would come up when I use the Leopard disks but I was able to bypass this by instaling it through the Bootcamp64 file found in the Apple drivers folder.
Can someone help me out here I need to get Bootcamp 3.0 installed, I think there are some 3rd party apps that can give you HTFS read capability but I don't want use those, I've looked at some they are horrible so don't suggest it!! Also I'm not a 64x fanatic, I'm using Windows64x because you need it to use 4GB ram.
View 4 Replies
View Related
Feb 4, 2010
I am trying to install windows XP via bootcamp. But I am getting disk error right after first installation stage of windows XP. I was installing on Fat32 partition. Before this I was running windows 7 but I need to reinstall windows XP as I needed to use a software that only installs on windows XP.
View 1 Replies
View Related
May 28, 2010
I have a 27" iMac with an i7 CPU, 16GB RAM, 2TB HDD. It is running Windows 7 Ultimate x64 under bootcamp.
When I try to install bootcamp services it states "to install bootcamp services you need to running Windows XP SP2 or Windows Vista"
I then downloaded bootcamp services 3.1 from here:
[URL]
It clearly states Windows 7 support, and is for X64.
Yet when I run it, it gives the same error stating I need to using Windows Vista or XP SP2.
does one install bootcamp services on a 27" iMac under Windows 7?
View 3 Replies
View Related
Sep 16, 2010
Is it possible to install Boot Camp 3.0 or higher on Windows 7 64-bit when dual booting with Leopard? What I've been reading suggests I need the Snow Leopard disc for Boot Camp 3.0+ and Windows 7 compatibility, but I only have the Leopard OEM disc.
View 8 Replies
View Related
Dec 11, 2010
1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
Is there a limitation to running Windows 7 only?
View 1 Replies
View Related
Mar 17, 2009
Just wondering which one will be best for me to install on my MBP for gaming in Bootcamp. Pros & cons of each?
View 5 Replies
View Related
Mar 31, 2009
im having problems getting the hardware drivers for the new MBP 15' 2.4ghz to install on windows. I've followed the instructions on the site.but when i put in the isntall cd it gives me two options. one being to install bootcamp/OSX (which i didn't want it to delete windows on that partition.)or it gives me the option to allow a macbook air to use my cd drive as it's own ( or something to that extent
i've tried searching the apple site and on these forums on help to this issue but no soloution yet.
View 4 Replies
View Related
May 6, 2009
I have an imac with Vista installed both on a Bootcamp partition and in Parallels.
Sorry if this sounds ridiculous but could anyone advise instructions on installing Window 7 on my imac?
I don't want to mess it up- ?
View 3 Replies
View Related
May 11, 2009
I have currently XP installed in Boot Camp and I have Vmware fusion installed in OSX. I can boot my XP partition via vmware fusion. Now the question is, when I boot the XP via vmware, I can boot from a Win 7 DVD and the installation starts. Can I just go on an install it in this way? The thing is that I'm not at home and only have a VNC session to my mac, so I can't install it in the classic way which requires a reboot
View 2 Replies
View Related
May 31, 2009
Is it possible to install Windows on its own hard drive or with Boot Camp are we forced to install it on a partition on the startup OS X disk? I tried to install it on an empty 250GB HD with Boot Camp, but when the system restarted to install Windows, it asked me to choose a CD ROM and gave me the option of 1 or 2. When I pressed either 1 or 2 nothing happens. It remains stuck on that prompt. By the way, I only have 1 CD/DVD ROM drive in my MacPro.
View 5 Replies
View Related
Jun 24, 2009
I just bought the high end macbook pro 13" (2.53 GHz) today and I have a question about which version of windows to install on the boot camp partition. I saw a couple of videos on youtube showing pretty smooth performance of GTA IV on a MacBook Alu 13" 2.4 ghz model using BootCamp Windows Vista SP1. I dont want to install Windows Vista SP1 just because of that video and I want to know which version could give me even better performance. Both official and unofficial windows versions of XP, 7 and vista are under consideration. I dont need windows for anything else, just for playing a couple of games.
View 4 Replies
View Related
Aug 23, 2009
I recently received My Macbook I bought without The Mac Restore disc. I plan on getting Snow leopard, but in the meantime I wanted to know If I can use bootcamp to install windows xp sp2 oem Cd that I purchased 2007 without the Mac disc? When I tried it displayed Mac os X cd as required.
View 7 Replies
View Related
Aug 23, 2009
I've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
View 1 Replies
View Related
Oct 13, 2009
I have an alu iMac, the kind that apple says could not support x64 bootcamp 2.
Having done a bit of research, I followed the instructions on installing the x64 mac pro bootcamp drivers on this computer, and since then have been using Vista x64.
Now, with snow leopard, I'd like to upgrade to bootcamp 3, and once again I am faced with apple's "this machine isn't supported".
Can someone point me in the right direction to get bootcamp 3 x64 drivers installed?
Would I have to dig up the first gen mac pro x64 drivers?
Is apple supporting x64 on the first gen mac pro?
Should I just install every single x64 driver off of the snow leopard installation disc?
View 2 Replies
View Related
