I made Boot Camp partition in order to install Windows on my Mac. Therefore it is 32GB, and after all I put the XP sp2 CD, I click 'Start Installation' and the computer says that can not recognize the Windows CD. I tried with different Cd's but still the same thing appears.
View 1 Replies
I have an external drive that I've been using for Time Machine backups and file storage. I had two partitions to do this (one for TM and another for files). That was pleasing until I bootcamped Windows 7 to my Mac. Now I would like to use another partition for Windows Backup and yet another for files since I gave Windows only 15 gb to work with (my internal HDD isn't very big). No problem, I thought.
My external HDD is 1TB so I just split the ridiculously large Time Machine partition in half and split the half in half. Voila! Four partitions on the drive! However, Windows would not recognize it. After searching around on the netz, I opened Disk Management (somewhere in the Control Panel's administrative tools). It asked me to initialize the disc. Wary, I searched the netz once again to find that this will likely erase my data. So I haven't done it.
My questions:
1. Will "initializing" the disc actually erase the data that is already on it?
2. Is there another way to get Windows 7 to recognize the drive (and the two pertaining partitions)?
--- Other Info ---
External drive partition map: Apple Partition Map
Connection type: Firewire
Windows OS: Windows 7 (64 bit)
Mac OS: Leopard
I have 2 legit XP CDs that came with previous PCs but none are above SP1. I acquired an SP3 iso and I have burned it multiple times in multiple ways so that it is bootable. The disc is recognised but it is not recognised at the boot screen (when option is held in at restart).
View 3 Replies View RelatedI just got a new MacPro (running Leopard) and I'm trying to get Windows XP to work via Bootcamp.
I used the Bootcamp Assistant to create the partition, then install XP, and then from XP install the various drivers from the Leopard Install CD. But XP doesn't think there is a wireless card in the Mac, which makes me think it is a driver issue.
I've successfully installed XP on a partition thanks to advise from MikeSantos but windows does not recognize the numeric keypad on my apple keyboard nor will it recognize a pc keyboard that i plug into the Usb port.
Has anyone else had this issue and if so were you able to reconcile the problem?
I've started installing XP onto my iMac, and it's at the screen where it asks what partition it should be installed on. In order to select a partition, I'm supposed to use the arrow keys on my keyboard, but my keyboard doesn't seem to be recognized by the installer, as well as other keyboards I've tried. So now I can't install windows. How can I get it to work?
View 4 Replies View RelatedI recently installed an LG GGC-H20L Blu-Ray and HD DVD drive into the second bay of my Mac Pro. This in itself was an absolute pain, as I had to enable AHCI for Windows Vista by using a modified mbr because I was using one of the ODD_SATA ports on the motherboard which Windows doesnt' "see" cause it runs in legacy mode. Everything there went completely fine, as now I am running in AHCI mode and I can see the LG drive and I can play CD's and regular DVD's via that drive in Windows Vista. However, the problem now is that when I insert a Blu-Ray or an HD DVD, Windows doesn't even recognize that there is media in the drive. It says there is no disc inside. When I boot in OS X, I can clearly see both the HD DVD and Blu_ray (although I can't play it or do anything with it).
View 2 Replies View RelatedI am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
View 2 Replies View RelatedI am running bootcamp on my macbook osx 10.6.8 and when I use windows it doesn't recognize my wifi connection. So I have no way to connect to wifi on windows. I am not sure how to get Windows to recognize my wifi....
View 11 Replies View RelatedI have Windows 7 64-bit on my MacBook Pro. I have Windows Live Mail installed. When I sync iTunes to my iPhone 4, under the Info tab it says "No supported application can be found" for the Calendar and Mail sections even though I have Windows Live Mail and it has a calendar in it.
View 2 Replies View RelatedI recently purchased a MBP and a Time Capsule. Still waiting on the MBP, but went ahead and set up the TC as a router for my current Dell laptop. In theory, I don't really care since I will have my MBP w/in 2.5 weeks, but is it possible for my Windows machine to see the disk on the TC? I went into TC and set up the workgroup name to be the same as the workgroup on my PC, but I still don't see it. I doubt anyone has done it, but was curious if it's possible. I assume that the Windows client should be able to access that giant disk (or a Windows user would never buy the product). One question though, it shows the filesystem as FAT32. Is that right, or just how it's represented to the Windows client?
View 19 Replies View RelatedIt all started off when I installed windows 7 on my mac via bootcamp. It worked, but somehow Leopard didn't recognize the windows partition, and that all ended up in even more trouble, so I ended up reinstalling Leopard, thereby erasing everything on my hard drive.I have now reinstalled leopard, but somehow, Disk Utility can not start, everytime I open it, it says it had stopped working and that I can send an error report. Damn! I just need Disk Utility to recover my drive, so that bootcamp can make the partition, but it doesn't work!
View 3 Replies View RelatedI've just installed Windows on my MacBook with Boot Camp. I decided to format the disk NTFS instead of FAT because everyone says NTFS is safer and more reliable. The problem is, I can't seem to use my external hard drive when using Windows, and can't copy files from Mac OS to the Windows disk because NTFS is read-only. There are some pretty big files I have on my MacBook that I want to use in Windows.
The external drive is a Western Digital "My Book".
Sorry if this is a really stupid question but is there a way of using my hard drive in both Mac OS and Windows? If not is my only option of transferring data from one OS to the other to reinstall Windows as a FAT drive or to use DVD-Rs?
OSX does not recognize the NTFS partition of Boot Camp Windows 7 I have. It is not mounted in Finder. I went to Disk Utility to see the NTFS partition, the one I installed my Windows 7 on, but it says the format is in MS-DOS(FAT) whereas I clearly see it shows as NTFS on Windows 7. It is also greyed out, named disk0s3.
I tried to verify the disk and it fails as follows:
Verifying volume "disk0s3"
** /dev/disk0s3
Invalid BS_jmpBoot in boot block: fcfcfc
Error: This disk needs to be repaired. Click Repair Disk..............
I've installed windows 7 in bootcamp.How do you get windows to recognize the trackpad and magic mouse?
View 9 Replies View RelatedJust need to know if it will recognize all my windows based jpegs etc on windows formatted drive. If not, it has the ability to daisy chain a USB drive onto. If I plugged in a Mac formatted hard drive as a daisy chained hdd would it see this one?
View 5 Replies View RelatedI know this has been discussed before but I am completely confused. I've got some GPS maps that I want to load onto my system using the Windows side...but I want to put the maps onto my external hard drive. The hard drive has been formatted to mac
View 5 Replies View RelatedI am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
nstall Windows XP SP3 on my macbook with a dual boot. I downloaded it from Windows, and have an iso file. I used the disc utility to burn it to a disc, but when I try to use it with Boot Camp, Boot camp does not recognize it as a bootable disc.
View 9 Replies View RelatedWhen I use Thunderbolt to Gigabit Ethernet Adapter in win7, it cannot be recognized by win7, how to fix it?
Info:
MacBook Air, Windows7
I bought two sticks of this RAM http://eshop.macsales.com/item/Other...g/3200DDR1024/ and put it in my Dual G5, following these instructions http://www.info.apple.com/usen/cip/pdf/g5/memory_c.pdf , but when I go to 'ABout this Mac,' it doesn't recognize that I've added RAM. I put the two sticks in slots 3 and 4 of the bottom half. I then tried putting the RAM into slots 3 on top and 3 on bottom, and then 4 on top and 4 on bottom....but it still won't recognize it. Did I do something wrong?
Information:
Dual Mac G5
Mac OS X (10.4.8)
When I plug my camera in then turn it on iphoto pops up and I can do anything with the pictures but how do I see just the camera without iphoto, like enabling disk use.
View 5 Replies View RelatedI just bought 2 new 4GB DIMMs for my Mac pro to expand the memory from 8GB to 16GB.
Here is the new arrangement: Top Riser: 4X2GBBottom Riser: 2X4GB
(I wanted to keep at least 2 slots empty just in case)
The problem: Mac will not recognize them. Every time I boot the computer it only recognizes all the Top riser memory (all the 2GB DIMMs only).
The bottom riser with the 4GB DIMMs will be shown as "empty".But...If I remove all the 2GB, only then it will recognize the 4GB ones. They are not faulty or not compatible then.In any scenario I haven't been able to go over 8GB. I did my homework, and I know they should be equal amounts of memory on both risers and preferably from the same manufacturer (which they are).
Info:Mac Pro, Mac OS X (10.6.8), 8-core Xeon 3GHz - 8Gb RAM
I'm having a problem with my MBP and am stumped; I hope someone has a solution. Here's the backstory (please bear with me; this may be a bit long in order to give you all the details). My keyboard croaked, and the 160gb hard drive was filling up, so I thought I would replace both and add more RAM while I had the beast opened up. So I did all that, successfully (I think). Prior to taking out the HD, I backed it up using Time Machine. The MBP was running Leopard. I have the original 10.4.8 disc, after which I updated to 10.5.8. Â
After swapping out the keyboard, drive and adding RAM, I fired the system up and it worked! So I inserted the Install disc, went to Disc Utilities and formatted and partitioned the 750gb new drive. When I asked the system to install the OS, it chuckled at me and did nothing. The new partitions are on the desktop, but the Install disc doesn't recognize them. I plugged my external drive in (the one that has the Time Machine backup...), restarted the MBP, and it booted from the Western Digital external drive. how can I get the system to recognize the new drive and install the OS on it?Â
Info:
MacBook Pro, Mac OS X (10.5.8)
Got a new HD with operating system pre-installed on it but it wont start-up? starts to do the chime but stops and no action? what am i doing wrong?
View 6 Replies View RelatedI have a Panasonic Camcorder, VDR D160. Neither of my Mac Books, one newer than the other, can recognise it. It does not appear on Apple's list of compatible camcorders.
View 4 Replies View RelatedI've been having this problem for a while (a few months), but I never remember to bring it up anywhere.
It just happened again, so here I am.
iTunes stopped recognizing that I put a CD-R in. The Mac itself doesn't even realize it, as I usually see it on the desktop when it's recognized.
They are Memorex brand, and they used to work just fine on this same Mac.
DVDs work fine, so I'm thinking it's not a faulty drive...
I replaced my hard drive and everything worked great for a day or two, I could transfer data off the old60 onto the new 120HD via the firewire enclosure.
I have a Tibook G4, need more space. then my pictures wouldn't load on the exterior, i've been days trolling the internet for answers, like 25 hours now. And now suddenly it can't get itunes open either. I did nothing!
i can go into the finder, navigate to my old itunes which shows that it's there (it's 7.1) and when i open it, it opens itunes4 off the new internal drive (fresh install of OSX had not been upgraded yet). (and the songs i had imported off CDs fresh into itunes4 on the new drive are gone as well, it's empty.)
same with iphoto, if i can get it to open at all, it ends up opening the application off the new drive and other aps won;t work now as well.
today i changed the home name to see if that helped (it was just left the same as the old homefolder name, thought that might explain the confusion) no change.
iphoto says it won't load, sometimes says it needs to be updated, or says files missing. (i did drag pictures and 3 .avi's off from the library that first day) or opens the new drive's copy of iphoto. itunes opens the new drive's version, and songs i imported fresh are now missing, but were there two days ago. this problem start about 5 days ago.
i reformatted the empty drive, as per instructions, when installing. was i supposed to change user names or passwords or not drag files across to the new drive?
so many questions...such a huge waste of time. pretty miserable at this stage. [URL]
As the title says, I've got a 15" 1.67 GHz Powerbook. I ordered a new RAM card off OWC a while ago, and just got around to installing it now. The card specifications are as follows (taken from the order invoice): SO-DIMM 1.0GB Samsung Factory PC2700 DDR 333MHz 200 Pin SO-DIMM Module M470L2923BN0-CB3 S/N: 4150092 I opened the panel in the middle of the computer's underside, aligned and slid the card into the top slot, then pushed it down and closed the computer back up. I turned the computer on a few minutes ago, only to see that it was still only recognizing 512 mb RAM. Can anyone tell me what I did wrong, or what the deal is? On the Apple website, it lists a procedure for installing Powerbook RAM that involves removing the keyboard, which I did not do, because I don't think that applies to my model.
View 2 Replies View RelatedI cannot get PS3 to recognize (connect) with my MacBookPro following an update to MediaLink 1.59. With the earlier version of MediaLink I could look at photos on our tv via PS3. Now I do not get the icon for MediaLink when looking at, for example, photos on PS3.
View 17 Replies View Related
