I have a PC, and a macbook. I also have an external harddrive, formatted for mac. What I would like to do is plug the external hard drive into the PC, and share it over the network so that I can access it wirelessly from my macbook. The problem is that windows does not recognise the drive, so I cannot share it. Any mac-drive-formatted reading programs only read the drive from within the program, so I still can't share it.
I had a Windows based PC a couple of years ago that had crashed. So recently i tried to put the files from my old hard drive from my Windows computer to my Mac. In order to keep track of what i have copied and what I haven't i thought it would be good to delete the stuff of my windows hard drive once it was copied. However, it doesn't let me delete anything of the Windows drive since it is set to read only. Is there a way around this? i've tried everything i can think of, but haven't found a soluti
I just bought the 15" Macbook Pro i7 this weekend. I have a copy of Windows, and it loads up just fine. I used Bootcamp Assistant to partition my hard drive, but when I get to the windows install, it says that the hard drive isn't formatted correctly to install windows on
I'm running Lion on a Macbook Pro. It doesn't recognize one of my external drives that was used on my windows based laptop when connected via the USB cable. Is there a way to mount this external drive on a mac?Â
when i plug in my external thats programmed to my mac, on a windows based computer i cant seem to read the hard drive. is there a program or somthing where i can detect it and transfer files between it?
I figured it was the motherboard and that is way too costly to replace. So I just bought a Macbook and I'm waiting for it to arrive. I'm pretty sure that the hard drive on my pavillion is still ok, so what I've purchased a hard drive enclosure and plan to use that as an external hard drive as well as transfer my files to my new macbook. My question is whether I would be able to transfer my files from my PC hard drive to the macbook directly without formatting the hard drive because that will erase all my files.
I just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
I used to be able to drag files over to my storage drive from Windows 7, but I'm unable to do it now, I have Boot Camp 3.1 installed and the latest update for it. If I right click in the storage drive and select New Folder it says Destination Access Denied, and has the buttons Continue / Skip / Cancel. When I click Continue, it shows the same dialog but it says You need permission to perform this action and the buttons Try Again or Cancel, I've repeatedly clicked Try Again and it does nothing.
I just got a new external hard drive that I have been using for storage. I formatted it for Mac OS X (extended...not journaled). I realized a few days ago that I can run the movies from the HD in windows xp even though the drive is formatted for mac. Would I be able to install windows games onto the drive and run them in windows w/o having to format the drive for windows?
As I'm using pbg4, I'm not able to burn dvds. Therefore, I've decided to use my windows based dvd burner, which is on a separate PC. The os is windows 7; I've shared the dvd, as well as few partitions and folders and they show and work just fine under my mac os x 10.4.11, however, my mac doesn't see the dvd. I recently installed an update concerning dvd sharing, that basically added one additional service to my share preferences, but it didn't make any difference. Any ideas how to use my win dvd? And I have another similar question: as I mentioned, I have few shared items located at the same pc windows machine; the thing is that when the powerbook comes back from sleep, everything is unmounted, and I have to manually authenticate and mount every single resource I require, which is killing.
I just put in a new hard drive yesterday and when i restored my time machine backup I partitioned the disk with 30 gigs for windows and the rest for my mac stuff. The whole thing restored and I have my legit copy of XP SP2 and went to run boot camp and it tells me that I can't install it because the start up disk must be formatted as a single volume or already partitioned by Boot Camp Assistant for Windows. The Windows partition is completely blank.
I have a USB drive with a 5.25" HD in it hooked up to my mini running SL. On the USB drive, I have a file shared in the File Sharing section of System Preferences. The only option I have enabled is "Share files and folders using SMB." The machine trying to access the files is Windoze 7. After I enable file sharing on the mini, the PC can see it. But if I go for a long time, lets say overnight, if I try to access the files when I turn the PC on, it can not see the folder on the USB drive. But if I go to the mini, turn File Sharing off and immediately turn it on, the PC can see the shared folder. At first I thought it was maybe the harddrive being idled down, but it is not as I tested that theory. So what can I do to make sure the PC can see the shared folder all the time without me having to go into System Preferences all the time to turn it off/on for this to work?
I have 2 pc's and a minimac. I want to share them on my home network. I have a new 3TB external hard drive that I want to store everything on. I want to write to it from all computers. I want some files to be shared such as photoshop illustrator and premiere pro from both pc's and mac. Lastly I want to use time machine. Am I asking too much? The wife refuses to learn mac at this time. Maybe in the future then I can turn the pc's into a boat anchor.
Just need to know if it will recognize all my windows based jpegs etc on windows formatted drive. If not, it has the ability to daisy chain a USB drive onto. If I plugged in a Mac formatted hard drive as a daisy chained hdd would it see this one?
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I've been able to find ways to reallocate space on my hard drive but what if i want to take windows completely off and restore my hard drive to purely OS X? Is there a way to do that also?
Is there any way without creating a usb bootable install cd that I can install windows XP onto my USB Hard Drive and boot from it in mac? If I can download a already bootable version of XP, please show me a link (please tell me if thats not allowed). Also, my H.D. doesn't show up when I boot up and hold option. Thanks In Advance
Im running on a UMP 13" base model + 4GB Ram, I want to know whats the best way to install widows on an external hard drive on my macbook ? do i need anti virus as well ?
I'm having some huge problems. I have an .iso of Windows 7 Ultimate but my whole problem is that my macbooks dvd-rom drive crapped out on me a year ago so no burning no reading and Disc Utility wont let me restore the iso onto an external hard drive.
Does anyone have any idea what I could do to fix this? Is there a way I can put the image onto the hard drive at all?
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
I have an external hard drive which I have successfully installed Windows XP SP3 onto. It was a long and painful process but I finally was able to get a modified XP install disc ready and from a Dell PC running Windows was able to install onto the external hard drive and I'm able to boot from it and everything. I did this on a PC because I couldn't for the life of me figure out how to boot correctly from an external drive in Mac.
Anyway, the hardest part is in the past and now my only problem is how to boot this external hard drive from my macbook, which is primarily what I want to use it on. I currently have a Macbook with three operating systems on it: Mac OS 10.5.8, Ubuntu Linux, and Windows XP SP3. I use rEFIt to boot into these operating systems. I tried using rEFIt to boot into XP on the external hard drive but it just gives me the legacy error messages saying that it couldn't load and noting the booting legacy os is not well supported by mac.
We have 2 computers over here, one uses Windows Vista, the other is an iMac with OS X Snow Leopard. They're both connected to a hub, said hub is connected to the modem. The Windows machine has 2 printers connected to it, an HP DeskJet and an Epson Stylus.
Now, I would like to access one of those 2 printers from within OS X, so I can actually print without moving files between both computers through an USB stick or whatever. I've put both printers in Windows Vista on "Shared", but I can't seem to find them anywhere in OS X. So I guess I'm doing something massively wrong.
Below is a chart of how this "network" looks like.
So, is it possible like this to get access to the printers on the Vista machine from within OS X? If so, how do I properly set it up?
so today I bought a Toshiba external harddrive (black with green stripes?) and it has 160 GB capacity. I run windows on my Black MacBook, and am starting to run out of room on both (its 1/2 and 1/2 partitions of OS X and XP) Is there a way for me to put my windows onto my external harddrive and then restore my internal to ALL osx? then, I could just plug in the external harddrive and hold down something at start, and then it would boot up in windows?
(If this is possible, please just say it's not, but if it is, some detailed instructions
I'm trying to access my WD Passport using firewire 800 on both Windows & Mac.
The current situation is:
I have partitioned the drive through Mac Disc Utility with three partitions. 1. Time Machine 2. Mac OS Extended (Journaled) 3. MS DOS (FAT32)
I can access all partitions when running the MAC OS. However when using boot camp to lunch Windows 7 Ultimate (64bit) I cannot see the drive.
I've tried going into windows disc manager and can see the disc as an unallocated drive with no partitions.
What I want to achieve is to have the one external drive like this; 1: Time Machine (for MAC backups) 2: A partition for storing my MAC files on 3: A partition for storing windows files on (accessed while using bootcamp).
All without losing the existing backups on the drive.
