I just bought the 15" Macbook Pro i7 this weekend. I have a copy of Windows, and it loads up just fine. I used Bootcamp Assistant to partition my hard drive, but when I get to the windows install, it says that the hard drive isn't formatted correctly to install windows on
View 1 Replies
I have an old G5 I'm getting ready to sell so I wanted to format the hard drive. I went to disk utility, went through the process of erasing the disk, and then I did the thing that writes zeros over everything on your hard drive for just a fully clean formatting...
Moving on now to install Leopard (I tried Tiger too), when I get to "Select Destination to install Mac OS X", my hard drive won't show up at all. When I go to disk utility or startup disk, it only shows the Leopard disc that's in the computer at the moment. Doesn't show Mac HD or the volume or anything whatesoever...
I feel like at this point only something can be done from the Terminal, Everything I found people could still at least click on their HD in the disk until...
Yesterday i bought an Macbook pro of someone else, and today i formatted the hard drive and when i want to reinstall OS X from (OS X Utilies), is asked for apple id and password.
my own apple id is not working, and i cannot contact with him,what should i do now?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I had a Windows based PC a couple of years ago that had crashed. So recently i tried to put the files from my old hard drive from my Windows computer to my Mac. In order to keep track of what i have copied and what I haven't i thought it would be good to delete the stuff of my windows hard drive once it was copied. However, it doesn't let me delete anything of the Windows drive since it is set to read only. Is there a way around this? i've tried everything i can think of, but haven't found a soluti
View 1 Replies View RelatedCan an iMac read a plug and play USB hard drive that was previously used for a PC. All of my *.jpg files are backed up on the portable hard drive.
Info:
iMac, Mac OS X (10.7.3)
when i plug in my external thats programmed to my mac, on a windows based computer i cant seem to read the hard drive. is there a program or somthing where i can detect it and transfer files between it?
View 6 Replies View RelatedI figured it was the motherboard and that is way too costly to replace. So I just bought a Macbook and I'm waiting for it to arrive. I'm pretty sure that the hard drive on my pavillion is still ok, so what I've purchased a hard drive enclosure and plan to use that as an external hard drive as well as transfer my files to my new macbook. My question is whether I would be able to transfer my files from my PC hard drive to the macbook directly without formatting the hard drive because that will erase all my files.
View 3 Replies View RelatedI just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
Info:MacBookPro
Is it possible by any means to transfer mac files onto a windows “NTFS" formatted external hard drive...?? Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.5)
I've just got a new external HD, but it's not being recognised by Mac OS X (10.5.7). I assumed it was because it was in a Windows format, so booted Windows, but it then turned out it wasn't formatted at all. What is the easiest way to make this an HFS+ (the Mac OS extended format), and how do I do it as I can't see it anywhere on the Mac (including Disk Utility)?
View 6 Replies View RelatedSo I just partitioned my drive to install Windows and noticed that my hard drive is now making that "crunching" sound that some hard drives make. It started during my Windows installation, and it happens regularly in Windows.
I also briefly hear it while OSX is starting up, but it doesn't seem to happen much in OSX. I've launched a bunch of applications and it is still pretty much silent. Any ideas what could cause this? Could it be NTFS? I have several hard drives in my PC that don't make that sound. I am using a 17" MacBook Pro unibody with the regular 320gb 5400rpm drive that it comes with.
Data Rescue II was recommended to me recently to retrieve erased files from an external 1TB hard drive, where the files were accidentally erased whilst initializing another (now discovered as a faulty) external hard drive. I was led to believe by the sales person that the lost data could be recovered completely with no change, but now since using the software it seems this is not the case. As recommended, I scanned the drive using the scan specifically for deleted files, proceeded with the recovery (happy to see it had recovered all of the expected files, plus more) but then discovered that none of the files had their original file name (everything is now renamed with numbers relating to the file, and the file type). I have tried calling ProSoft several times now during their opening hours, and sent several emails to enquire further about the recovery process, but never receive an answer.
It would be great if anyone here has had a similar/same problem or knows if there is a way of retrieving the lost files with original file names intact. I fear that this software has left me with no choice but to open each file and rename individually, which is sure to be an epic task for the amount of files that were on the drive!
I am trying to access a PC formatted external hard drive, however when I attempt to mount it I get a message saying the drive is not recognized and if I want ti initialize, which i believe if I execute will remove the files I am trying access..Is there a way to access the files on the external hard drive...it is a avi file i need to edit.
Info:
MacPro, Mac OS X (10.6.2)
I try erasing it again and making sure it is formatted for MSDOS and still no luck. So I try partitioning and that is also no luck. 1 part for mac, other free space because no windows option was present
View 8 Replies View RelatedThis is what is says in disk utility? is this OK even after reformatting brand new MBP, that it still has 2 files, and used space is 447MB?
View 4 Replies View RelatedI was installing windows XP to my macbook pro and accidentally formated the hard drive to a FAT32, now when I go to start-up the computer all I get is the grey screen. I have tried holding the "C" key when booting with OS/X disc but nothing happens.
View 7 Replies View RelatedLast time I did this I ended up reinstalling my whole computer because I took out the Cd under the installation. And it don't seems like that I partitioned it or what it's called. I have done it now but I did go back and I shut down BootCamp assistant and now I have 2 hard drives Macintosh Hd and BootCamp but what I was wondering about is that if I going to install will the install be made on the BootCamp hard drive automatically?
View 5 Replies View RelatedI've got a 500 GB drive, currently partitioned for Windows 7 and Mac OS X. I've bought a new 750 GB drive. I figure I can use Restore from Time Machine Backup for my OS X partition, but that won't work for Windows. What's the best way to migrate the Windows partition?
View 4 Replies View RelatedI have a PC, and a macbook. I also have an external harddrive, formatted for mac. What I would like to do is plug the external hard drive into the PC, and share it over the network so that I can access it wirelessly from my macbook. The problem is that windows does not recognise the drive, so I cannot share it. Any mac-drive-formatted reading programs only read the drive from within the program, so I still can't share it.
View 3 Replies View Related when I insert my 'FAT' formatted external hard drive (Samsung M3) into my mac book pro it comes up with the error message that says "the inserted disk is not readable by this computer" and I therefore cannot access the files. The story (potential further details):Â
1. I had a problem with my mac where it took hours to load each time I turned it on, would only work when power was plugged in etc. so I had to reformat my mac hard drive (when I tried to veriify it said repair, that wouldn't work). So i'm starting with a recently reformatted, clean mac.Â
2. Before doing this I reformatted my external hard drive (whilst on windows machine) to FAT32 (so I can use on both windows and mac) so that I could back up my files.Â
3. I then transferred files from mac onto external hard drive and then also put them on a windows machine.Â
4. After reformatting mac hard drive when I then tried to transfer files back onto the mac I get the 'not readable' error.Â
Info:
MacBook Pro, iOS 7.1
This is a tutorial for people looking to clone their internal hard drive and install it into their macbook (usually because you've upgraded to a larger hdd). I have also included an installation of windows vis a vis boot camp style. Ive been battling this for the past 3 days, so hopefully this tutorial will answer some questions and save you some time.
1. Firstly get your external drive (clone) ready. Go to applications---->utilities---->disk utility. Click on your external drive and then partition it. I used 2 partitions, one for mac (200 GB) and one for windows (40 GB). For now partition in GUID partition format (found in options). This is important. You can check whether it actually as in GUID at the end of the format when you click on the drive and on the bottom part of the screen it will give you all the drive information. (NOTE: if you have a standard windows installation you can have 1 partition at this stage and then later let boot camp create a partition for you. Boot camp will only format in FAT, so all windows using NTFS are out of luck)..............
I have the Windows 7 .iso from Microsoft, but I can't burn it to a DVD as it's too large. I do have a 1TB external HDD, though. Is there a way I can put the .iso on that, and when I go to set up windows it installs off the drive instead of a disk?
View 1 Replies View RelatedI'm building a custom computer that I would like to run both OSX and Windows 7 on. At the moment I am trying to decide between installing 1 2TB hard drive or 2 1TB hard drives. I would preferably do the latter since I would like each OS to be on its own drive. OSX will be my primary OS. If I go for the 2 drive option they will be 2 seperate drives, not in a RAID config. Getting OSX onto the machine is simple enough for me if not a little roundabout. My main concern is Windows 7. Will bootcamp allow me to install Windows to it's own dedicated drive without having to partition the OSX drive? In my case would I even need to use bootcamp? Would holding down the "alt" key as done with bootcamp detect a second bootable disk even if Windows was not installed through bootcamp?
View 3 Replies View RelatedI'm running Lion on a Macbook Pro. It doesn't recognize one of my external drives that was used on my windows based laptop when connected via the USB cable. Is there a way to mount this external drive on a mac?Â
Info:
Mac OS X (10.5.6), Macbook Pro 15
I enabled view item info so it looks all snazzy and **** .The problem is it says 297.77 GB,,...62 GB free when i have way more free space
View 2 Replies View RelatedI just bought my first mac from my brother a couple of days ago and he used it for music downloading/recording and also video editing so when he sold it to me it really didn't have that much space left on it so I when out and purchased a Western Digital My Book Essential Edition External Hard Drive and can't seem to figure the installation out and probably how to use it correctly.
View 2 Replies View RelatedMy Seagate hard rive is saying that it is formatted NTFS when I plug it into my new mac. I have only ever used it on a mac and it didn't ever say this when i used it on my old computer.. Im not quite sure what to do because I have no where to put all my stuff to reformat it?
Also I made sure when I bought the hard drive that it was both windows and mac compatible...
Info:
Mac Pro, OS X Mavericks (10.9.4)
So I searched the forums and couldn't find a thread on this. My finder is no longer displaying my free space correctly. Whenever I remove files, it is stuck at 5.85 GB, even after dumping several gigs of files. I have an Early 2008 MacBook running Snow Leopard and my disk has been repaired and verrfied.
Info:
MacBook, Mac OS X (10.6.8), Early 2008
I have a MBP 13.3" w/ 4GB of RAM and an Intel G2 160GB SSD. I will need to install Windows 7 and one third-party application (not very large).
So I'm wondering, assuming I only need the OS install and the third-party application takes up minimal space, and I will not be installing anything other than whatever comes with the truckload of windows updates, what is the suggested partition size for Win7 (x64)?
Also, is there anything special I need to do (TRIM?) regarding my SSD?
Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? Â How would I do this?
Info:
MacBook, iOS 5.1
