I have a DMG image file of XP pro - which I'd like to install and use with Parallels. How do you install from a DMG file? Or do you need to do a boot copy to a DVD - again if so, how?
View 9 Replies
I have an iso image, which contains a .exe file. The iso image is from a game that runs on windows. Once I run the iso image, wine (version 1.0) starts up, and when I run the exe file, in the process window, I see the exe file for maybe 3 seconds, and then it stops. I don't know if what I am trying to do works. Would I need to install this game some other way and then run* it using wine?
View 2 Replies View RelatedI tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies View RelatedI have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I've got to transfer 250GB ish of files from an OSX machine (HFS+) onto a Linux EXT3 machine and a Windows NTFS machine.
The problem is that I've got lots of odd named folders/files on the OSX machine that are not compatible on the linux/windows machines.
For example :
"OLDER THAN 12/08/09" becomes "ONM6U4~U"
How am I going to get these files over properly keeping the file/foldernames as intact as possible?
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
View 7 Replies View RelatedI have Win7 RC installed on my Gen2 Macbook Air, it's installed natively, with no Mac OS on it at all. I do have bootcamp installed. It runs perfectly. But I'd like to try out the newest Mac OS and would like to dual boot. Is there any way to install Snow Leopard but not lose my Windows install? I've got too much in it to have to redo windows.
View 7 Replies View RelatedI installed Windows with no problem. Now I need to install the drivers, aka the mac disc. There are 2 mac discs I had in my Macbook Pro package. I put in my first one. It was, surprisingly a blank CD. I put in my second one. It did show BOOTCAMP this time, but it only had the options 'Remote Install Mac OS X' and 'DVD or CD sharing'. I couldn't install them. What is wrong with this. I am certain that the package wasn't fake, since I have the Macbook Pro here, but why doesn't the install CDs work?
View 1 Replies View RelatedOk, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
View 10 Replies View RelatedI'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
View 2 Replies View RelatedI want to clean install windows 7 after formatting disk. This doesn't sound like a great idea, but I need this for couple of engineering softwares to work. I don't want to spend my nights in computer cluster or at friends pc...
I have heard, I will encounter following issues:
- battery will drain faster
- graphics driver for x64-bit version
- camera
- iPhone backups and syncs (music, video, cal, contacts and apps)
- I would need a external mouse for right click.
I can live with all of the above problems except graphics card drivers. Can anyone provide feedback or useful links they have refered to installing Windows 7?
I have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies View RelatedI have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies View RelatedI have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
I got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point??
View 8 Replies View RelatedI am looking to install Adobe CS5 from a disk for a windows pc onto my macbook pro. Can this be done?
View 2 Replies View Relatedmy parents iMac 20" Core Duo is having issues. After bootcamp restarts the system I get an error on start up, a folder with a question mark shows up aswell as that prohibition logo How can I install Windows 7 on that machine?
View 7 Replies View Relatedyou cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies View RelatedI have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
Is there a way to install Windows on Bootcamp without it requiring you to enter the serial manually?
View 6 Replies View RelatedI am interested in installing windows 7 on my macbook. I am a student so am able to get the windows 7 home premium upgrade disc for cheap. I would like to know if it is possible for me to perform a clean install of windows 7 through BootCamp, with no previous windows versions installed using this upgrade disc.
View 14 Replies View RelatedCurrently have XP. But, I have heard/read that it is possible to do a clean install of Windows 7 from the upgrade disc. Or is that only possible on a PC? If so, how would I go about wiping XP off and then doing a clean install of Windows 7's 64 bit version?
View 7 Replies View RelatedI got a copy of Win7 from school and started installing it on my wife's computer (I have my own Win7 copy). I need to uninstall it...don't ask. I just need to know how to get a partially installed copy of Windows uninstalled. Each time I put the disc in and launch Parallels it wants to continue the install, which I can't do (faulty product key). Anyone know how to uninstall at this point?
View 1 Replies View Relatedim about to install windows on my macbook via bootcamp. However, i will use the same partition for parallels, which means that my ram is goign to be damaged. I wanted to know which os did u recomment me to install. Does windows 7 hog more cpu and ram than vista?
View 13 Replies View RelatedI downloaded the student discounted Windows 7 Professional from digital river, when I purchased it, the files came as a .iso file or a .exe file. I tried to download the .iso file (because I know I have to use disk utility and burn it onto a dvd) but when I click to download the .iso file (from the Macbook Pro) it refuses to download and text edit opens up. I have searched everywhere on how to download the .iso file but all I can pull up is how to burn the .iso file onto a dvd. What should I do?
View 1 Replies View RelatedI have a 27" iMac with an i7 CPU, 16GB RAM, 2TB HDD. It is running Windows 7 Ultimate x64 under bootcamp.
When I try to install bootcamp services it states "to install bootcamp services you need to running Windows XP SP2 or Windows Vista"
I then downloaded bootcamp services 3.1 from here:
[URL]
It clearly states Windows 7 support, and is for X64.
Yet when I run it, it gives the same error stating I need to using Windows Vista or XP SP2.
does one install bootcamp services on a 27" iMac under Windows 7?
