Windows On Mac :: Won't Install Windows 7 RC1 / Can't Work With Boot Camp
Apr 26, 2009
I have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
I want to know if anyone can identify compatibility issues with this set-up, it's for architecture school and it is very important that it works.
17" Macbook Pro 2.8Ghz 8GB RAM 128GB Solid State Drive
Here's where it gets confusing:
through Boot Camp 3.0, run Windows 7 Home Premium run AutoCAD 2010 run 3Ds Max 2010 run Revit Architecture 2010
(Each of these have well-documented problems running in Boot Camp regarding broken licenses, however, no information I can find since 2008 identifies issues. Autodesk's website does specifically say each of these products are supported on OSX through Boot Camp.)
I will be saving all files to either an external HDD (these also have been documented to cause problems concerning the license in Boot Camp, I am presuming that since Autodesk now supports Boot Camp, this issue has been/will be resolved through Autodesk) or a networked storage system at the university.
OSX will be used primarily for using Adobe CS4 Design, OpenOffice, and internet browsing. Basically, pleasure use with a minimum of curriculum-related applications (except for CS4).
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
ive been using my clean win7homepremium install for about 4 weeks now. i have the video card working nicely and all seems to be well, i play modernwarfare2 on it and it is all good... however (there is always one..)
the mic doesnt work... it seems to be recording but at a super low volume. i check win7 sound control and the recording is set to 'microphone' but no dice. i turn up the boost and volume to full and tap the mic on top of the display and i get 3 green bars...
i was hoping the 3.1 updates would fix it, however i cant get anything to install... its like its an update for vista, not an update for people already running windows 7.
I'm asking as a new Apple convert using Snow Leopard 10.06.2.
I have an iMac running Snow Lep and a laptop running Windows 7. The laptop did not come with a separate disc of the Windows OS. In the absence of the OS disc, is there any way to install Windows in it's own partition using Boot Camp, such as by copying an image of the laptop onto the iMac?
First I read "http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf". That's all well and good, but nowhere in this document is that "USB storage device trick" (see "http://support.apple.com/kb/DL995") mentioned! On the other hand, in that DL995 description there's nowhere mentioned that there are additional steps to do afterwards!
first I prepared my USB storage device according to DL995, made a 201GB partition, inserted the 64 bit Windows 7 DVD and ran the installation without any problems.
Windows works, but brightness and volume controls for example don't work.(When I press F1 I get Windows help etc.)I can't find Boot Camp installed under Windows anywhere!
After the same installation on my second 21.5" iMac everything looks identical with the exception that under "Bluetooth Devices" on one machine there's "Apple Wireless Keyboard" and "Apple Wireless Mouse" installed - on the other machine NOT, even tough I've NEVER used Bluetooth devices any of both machines (just used wired Apple keyboard and USB Trackball).
Before I continue (OS X disc, 3.1 update... if required at all?), how can I verify that the USB storage device had been used at all?
the first steps of boot camp came simple and easy partitioned and load installation disk but when i click on "install now", an error came up stating "windows could not retrieve information about the disks on this computer"
I thought maybe that has something to do with PAL vs. NTSC but both the iMac and the window 7 software were bought in Germany (where I live) so I just don't know.
Last year I also bought and installed Parallels on my iMac but never really used it. The reason I'd like to install windows is because I really need to learn AUTOCAD and it runs on windows.
I just mention it because I guess I have the option of using Parallels (though it still seems to have an old version of Vista on it and I can't get rid of it).
I just got my new 27" iMac, and wanted to install Windows 7 64 bit via Boot Camp.The installation went fine, but now when the iMac restarts, after the Windows loading screen, I just get a black screen, no display.Windows works, I was able to use it in VMware. I read here and there that there were problems with the ATI card in Windows 7, so I tried to install the Boot Camp drivers in VMware, even the ATI Catalyst ones.Even after that, no display in Windows.I read that someone here used a external display to make windows work at first.
I have a Macbook and I had Windows XP on my Boot Camp partition, but I wanted to upgrade to Windows Vista because my friend recently found their Vista install disc. I backed up all of my information from my Windows partition on my external hard drive, booted the Apple side, and ran Boot Camp Assistant. It made the separate partition, but then when it asked me to install Windows it said insert the Windows install disc, so I did... but instead of my Macbook restarting and installing Windows... it restarts... then you hear the CD drive/optical drive speed up A LOT, then it slows down, and ejects my CD, instead of running the setup. I became so desperate to get Windows back on my Mac, that I tried installing Boot Camp with my friend's XP SP 2 install CD. No luck. I thought my CD drive was damaged but it's not.
For starters, the computer recognizes when I insert the XP & Vista CDs... it appears as, "XP_HOME_SP_2" with a CD icon on my desktop on the Mac side...
I have used disk utility to take DMG files such as OSX and create a disk image onto the flash drive and upgrade / reinstall the OS on my mac.
I don't have any blank DVD's to burn the win 7 ISO onto so I tried doing the same by putting the ISO onto a flash drive and it doesn't work in Disk Utility. I tried doing it on a XP computer which was (I think) successful in putting the disk image onto the flash drive.
Now when I reboot and hold option I don't have any option to start up the computer other than the Mac HD.
I have installed Paragon to be able to read and write NTFS files / disks.
Does anyone know if its possible to install win 7 via USB onto a mac or am I wasting my time?
I have a new MacBook Pro 13-inch mid-2010 model, and I noticed that when I am in Windows 7 and try to use my headphones through the audio jack, I get no sound. I looked on Apple's website, found the 3.1.3 patch which claims will fix headphone sound, downloaded it, but when I went to install it, I got this error:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
This is frustrating because I DO have Boot Camp 3.1.0 installed, which I assume is the version needed to upgrade, and Boot Camp IS installed. I also downloaded the 32-bit version as that is the version of Windows 7 I have, and just for jollies I tried the 64-bit version but that yielded the same error.
What am I doing wrong here? How can I install this patch? I would very much like to be able to have functional headphones.
I installed Windows 7, 64 bit to another partition. I let it do its update thing. When moving on to installing Boot Camp from the Mac OS DVD however things failed. I heard that if things does not work out as promised I would have to download the Boot Camp 2.1 64 bit version for windows vista from the apple website, so I did. This didn't change anything however. The OS as a whole works well as of now but there's no support for any of the hardware such as hotkeys, camera and multitouch. I've also noticed that the sound drivers don't work properly and I'm stuck with a red light in the earphone jack, together with no sound. This goes even AFTER installing the latest drives from Realtek's website. Lastly, it also seems that my graphics drivers are not working that well. The other day I was trying to play Plants VS Zombies but the whole game was very pixlated, nothing like it should be. The game itself does not have any settings for changing this.
So in short this is what does not seem to be working: - No support for the hardware such as isight camera, hotkeys, multitouch etc. - No sound. - Graphics not as good as they should be.
For those who have installed the Boot Camp 3.0 drivers does it resolve any of these problems with the 2009 Macbook:Low volume output from speakers, Optical output red light always on, Keyboard backlight won't turn off, Microphone not working, Left speaker louder than right speaker
Other than the ability to access your Mac drive does Boot Camp 3.0 add anything that would make it worth the upgrade?
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Is it possible to install windows XP onto boot camp as an .iso without having to create a cd. If cd is needed can you tell me what software i need to get to burn it correctly so i can run Windows XP on boot camp.
I have the OEM version of Windows XP Pro Sp2 and i am having trouble installing it using boot camp 2.0. The general opinion seems to be that the OEM version works fine so would someone
I am about to install XP Home under Boot Camp and have just read through the Apple Boot Camp installation guide and noticed at the start, that it states that "you must use" Windows XP Home with SP2 or above. I have a very old version of XP Home and wondered how I can tell if it already has SP2 on it? The original Windows XP box has "version 2002" on it but no other indication that it has been service packed. I don't want to try it, just in case it causes installation problems.
So I finally got around to installing the boot camp 3.0 drivers from my SL cd; however, I keep getting this error in which the installer refuses to install the new boot camp drivers. I'm running the 2.1 drivers just fine. The error I get is:
"The installer encountered errors before Boot Camp could be configured"
I'm going to try to uninstall the 2.1 drivers and see if I can install the 3.0 again, but I doubt it will work. Others have had this issue:
[URL]
Has anyone else run into this? I'm running XP sp3. I think this may be an sp3 issue, but I'm not sure how to get around this. I could manually install the 3.0 drivers, but how do I know which ones to choose? Can someone possibly list the drivers on the SL cd that I need to install manually? (I have a late 2009 2.8ghz 15'' unibody macbook pro.
After my other thread and a bit more research I have decided that Boot camp will suit my needs the best.My next question, which Version of Windows will work the best on the MBA. I know 100% that it won't be Vista. But cant decide between Win XP or Win 7.
I know the Boot Camp drivers that are shipping with the latest Mac Pro includes 64-bit drivers for Vista, but I was wondering if anyone has tried to see if they work on XP x64? That's the 64-bit Windows version I have on hand and it would be nice to get it to work. I don't suppose the drivers that shipped with the MacBook Air are any newer?
You would think that Apple would jump to support XP x64 given the commercials about people switching back from Vista to XP.
I've been trying to install the latest update (2.1) to Boot Camp via software update without success. Windows refuse to complete the installation. Does anyone have experienced the same problem?
