OS X :: Win7 Installation - Command Keys To Boot Wont Work
Jan 17, 2010
I got an iMac 27inches and I tried to install win7 by bootcamp. So everything goes smooth until it ends the installation. When it resets to start windows its just continue in that cicle. So I turn on my mac, it goes to te windows7 promp "Windows Error Recovery" and when I select one of the options "Safe Mode" - "Start Windows normally" it just resets again. And the worst part is that I can't even boot from CD or from my HD. I tried all the key combination and nothing.
I've done a complete reinstall. I've downloaded the x64 drivers. I've tried everything, and yet my function keys (sound, brightness, eject key, etc) just won't work! They did work when I just used the original disc that came with my MBP. They all worked except the eject key when I only used said Leopard disc. So, when I tried the x64 disc, everything went kaput, including my sound. I have since got that working, but now neither my function keys, or eject key, are working. Can someone give me a step-by-step of what they might have done to get around this, with links?
I currently have a MacBook Pro and I am trying to put Windows OS on it using the Boot Camp option. I can download Windows 7 using my university's website, but all instructions for installing Windows using Boot Camp require using a CD. Is it possible to do it with it downloaded on the desktop, or do I need to put it on a CD/DVD somehow and then use that? I'm not sure if I can put it on a CD (with the stipulations of the University share program).
We have a 2.4GHz intel Core 2 Duo MacBook.The track pad and "F" keys work but none of the other rows of keys work...any help figuring out how this can be fixed?
I am keep getting below message. I do have Bonjour in my system and I am the only user on my laptop and I am the administrator. What am I supposed to do?
I just downloaded Windows 7 (64-bit) from my school's software hub and burned it to a bootable disc. I partitioned my drive, and was able to boot from the installation CD. Now, for some reason, my copy of Windows 7 must be different from EVERYBODY else's, because when I start, it asks for the language, and then I click begin install. Here's where the problem comes. I immediately get a dialogue box that says I am missing a required device driver in order to continue the installation. Please insert the CD, USB, etc. with the required drivers. (Of course, it doesn't tell me what they are.) Now, here is where I would put in my Snow Leopard disk, if it weren't for the fact that the disk refuses to eject. So, I can't even begin the installation at all. Is there somewhere I can go on the disk to find these drivers and put them on a USB flash drive? Or any other work around for this?
Just installed windows 7 on my imac, the only problem is that at the lowest brightness (set via keyboard and boot camp utility) the screen is too far bright!! Is there a way to low brightness via software?
I'm trying to install Windows 7 on my 27" i5 and I've been having a little trouble. I heard about people having issues with screens going blank, so I went ahead and followed Apple's instructions on the matter. I put the files they said on an SD card and started into the Windows installer. But after about two screens, it says, "Windows could not display the images available for installation." Then my computer restarts.
I just installed Windows 7 on my Windows partition and everything works fine (video, audio, etc.) except when I try to control the sound from my keyboard with F10, F11 and F12....nothing happens.
Why is redo command+shift+z and not command+x? When working with a pages document, if I want to redo a few changes, you have to be super careful to hit all 3 keys at the same time or it will type a "z". If this happens then you lose all the stuff you were trying to redo! Even being careful sometimes still doesn't allow it to work right. Any way to change the redo button?
This is now few days I try to install Win7 from USB on MBP 15 i7. I used the Windows 7 USB/DVD Download Tool Help to create my USB stick. I was successful to install it on my brothers 27" iMac using the same process but Im having problem with my MBP.I create the BootCamp partition 100GB and installed rEFIt.Each time I try to boot of USB I get: No bootable device -- insert boot disk and press any key
I can't get Windows 7 Ultimate (64bit or 32bit) to install on my mid 2010 MBP 2.4 Core2Duo 4Gb Ram 250gb hdd). I created a 40gb partition successfully, but I only have A DVD of Windows 7 Upgrade. I have an ISO (legally obtained) of the full version. When I try to install from the upgrade disc with custom installation, not upgrade, I get to "Expanding Windows Files" and then it hangs at 0% forever. I have a 320gb external hard drive. I have already restored my computer with Time Machine today. Still, no luck.
Windows 7 install was at 29% for ages on extracting files so I moved the laptop beside me so I could keep an eye on it. As soon as I set it down I got an error message saying files were corrupt? (I was fairly gentle). (I haven't tried again yet as my macbook is only a day old and I want to mess around with it).
I have an old release of windows 7 installed via bootcamp on my macbook pro and it works fine and great. However I want to install a newer release and I am not sure what way it should be done. Can I simply run the set up in my current windows 7 installation and install the new release this way? or would I have to format the bootcamp partition and go through the bootcamp assistant again?
Recently, I was installing Windows 7 on my Bootcamp partition, and the installation was going fine, but I ran out of energy so the installation was interrupted. I boot my Mac OS, opened Bootcamp and erased the partition just to create it again and install Windows once again. However, when I loaded the installation from my DVD, I got an error message saying that a CD/DVD driver was missing, and it found no hard drives even after rescanning my computer. When I chose browse, I was surprised when I saw not 2, but 3 partitions, one with my MAC OS, the new Bootcamp partition, and a drive called X: that was created when the past install got interrupted.
I've tried erasing the partition in bootcamp over and over, but I can't erase it, even though Mac OS tells me my drive now consists of a single volume. Do I need to format my whole drive? Do I need to install OSX? Will I lose all my applications and data? In case you need it, here's some info: OS X Version 10.6.2 Intel Core 2 Duo 2.66 Macbook Pro 4GB Ram Windows 7 Ultimate
Running OS X 10.5.8 on a Macbook Pro that's roughly 2 years old (maybe a little more). About a week ago I noticed that I was unable to copy/paste/undo/cut. Thought it was a total command key failure at first but other shortcut functionality is intact (cmd+t/cmd+w etc). So I've isolated the problem to the left cmd key and the bottom row of my keyboard. Separately they work just fine, but they refuse to work together.
I am a mac newbie, but experienced linux and windows user. I am trying to restore my mac mini (mid 2011) running mavericks. The process should normally be very simple; press command-R keys while booting to start recovery mode and go from there.
Unfortunately my keyboard is a palm-sized keyboard without command or windows keys. So I am stuck. I have 2 windows laptops that I can use to remote login but I cannot do remote login during boot.
I tried mapping the Command key to Ctrl key inside OS X, but it seems like this only works after reboot.
I tried to use recovery disk assistant as it requires "Option" key, but the assistant does not allow me select the HD, as I guess I do not have a recovery system on the HD.
I tried doing network install, but it requires the install CD, which I don't have. I have an ipad and two iphones if it
I have OSX installed on a very old Powerbook. Well it was working and then I left it for awhile and now it is giving me the good old folder to question mark screen (maybe someone dropped it?). Well I'm not much of a mac user so I looked up all of the different boot key commands and tried to boot from my OSX CD. Holding down C did nothing, and neither did ANY of the other commands except holding down option and that key command that restarts the computer (apple, option, shift, esc?). Anyway, I got into the screen that shows your hard drive and all other devices and it actually listed the CD drive so I clicked it and clicked the next arrow. I waited for awhile and then the screen reloaded (as if it was rescanning for removable devices) and then stopped and only displayed the local disk. What is going on?! It only sometimes displays the CD in this screen and the next arrow never does anything regardless!!
I really don't know any of the computers stats but if I were to guess they're pretty bad. All I know is it used to run OSX just fine and then other people used it and now it doesn't do anything.
After numerous attempts at booting into safe mode while holding shift on start-up, I tried entering sudo nvram boot-args="-x" in terminal to force it manually. Turns out my mac didn't like it that much.
Now whenever it starts up, it hangs on the gray screen for a bit and turns off immediately, never booting.
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation triple boot snow leopard, windows 7, & ubuntu
I have done the following: 1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here: Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
Macbook Pro (2014) when I work with Microsoft office, Word, and use the "command v" keys the entire Word doc freezes and I need to reboot entire computer. What is this?
I downloaded the windows 7 RC (the 7100 one) and cant seem to burn the iso to a dvd and boot. I download from microsoft and I try and burn with disc utility. It seems to go well, but after burning the verification always cancels halfway through. Do I need special dvds? Am I burning the iso wrong? I would really like to boot camp my mbp with 7.
Just about to buy a Imac 27 i7 with the SDD and 2TB, where I also will run Windows 7 (64bit). Is it ok to make to partitions on the SDD for MAC OS and Win7? Never had a SDD HD before, so just want to be sure to partitions works as always here.
I want to install bootcamp with using Win 7 but I have both 32 bit and 64 bit versions. Am I able to use 64 bit without problem or do I need to stay with the 32 bit version? I am using a iMac (early 2009 model) with 8 GB ram and ATI 4850 HD video 512 MB ram.
I have a (check sig) and just tried to install the Windows 7 RC 64-Bit onto a Bootcamp Partition. I had been using the Beta way back, but had cleared that partition in advance for a clean install. With that I had no problems...ran the 7 beta fine alongside OSX. I followed the same procedure I had done for the beta install with RC, following the guide on the internet. Everything seemed to work out peachy, Windows 7 booted fine, I added all my settings again. Then I switched over to OSX to eject the disc, which was fine although the boot in was quite sluggish. I set the boot drive as "Macintosh HD" in System Prefs, and proceeded to try to boot into Windows 7 again....this time it was no go.
The screen came up with the white cursor on black, and then the "Starting Windows" showed, with the animation above it. At some point during the animation, it just froze. My fans were at normal speed and everything. I tried many times, same story. So I thought I would shut down, boot into OSX, and try to erase the partition. That didn't work either. When booting into OSX, the start-up chime sounds with the white screen, then the gray Apple logo shows up....and that's where it stays. I reset the PRAM, no luck. What could be the reason it hangs on BOTH boot processes? Because for a short time they did both work, and I could not have erased my OSX partition or anything because I did boot into it once after installing the Win7 RC. I also can see both partitions when I boot holding Option...
So, I have a mid 2008 24" iMac (the one with the black plastic backing) with all the possible hardware upgrades available at the time. I recently upgraded Leopard to Snow Leopard, which went great, except it messed up Vista. So i deleted the partition and started over, only with 64 bit Win 7 (with a disc i bought from MS). Boot Camp 3.0 installed it just fine, except now that I'm running Win 7, Boot Camp is no where to be found so I can't access Snow Leopard in any way. I pop in the Snow Leopard disc and it simply says my computer model does not support x64 boot camp.
I've bought my 13" MBP (love it) but need to dual boot to run some programs, so I bought the Windows 7 Prof 64bit Upgrade. Now... because it's the upgrade version do I need to have a previous version of a Windows OS installed before I can upgrade or can I install straight away? Another question, at some point I'm tempted to upgrade to the 500gb Momentus XT. Will my Windows 7 disk be okay for multiple installs?
