Windows On Mac :: Bootcamp Demands OSX Journaled Extended?
Oct 12, 2008
Awhile back I made a Vista partition, shortly after I deleted the partition. I now want to make a new partition, but when I go through bootcamp to allocate space, it gives me an error saying i need to have a "Single Mac OSX Journal Extended drive.
The problem is, my drive shows up as Journal Extended. I would really like to not have to reformat my drive, as I do not have the CD's for all of my programs. Is there any way around this? I do have an external HD if necessary.
What's the difference between Mac OS Extended and Mac OS Extended (Journaled)? Which one is better to format an external hdd that's going to be use mainly as a scratch disk?
My computer was acting slow so I ran Tech Tool. It came up with various Volume errors but they were all fixed. I noticed that this computer was formatted as Mac OS Extended but NOT Journaled like the other two in our office. I was unable to add Journaling with either Disk Utility or Tech Tool. Both cases said that "Journaling failed" or "unable to add journaling". I believe I used to have journaling because I often use Onyx for repairing disk permissions and various other processes and this was the first time that I encountered the error "Not possible to verify the start-up volume because it is not journaled". I ran the Apple Hardware Check and the Hard drive is fine. So, after trying the previous mentioned utilities again to try and "journal", I decided to perform an Archive & Install. I am in the process of updating the OSX software, but I noticed the HD still says Format: Mac OS Extended...Hmmmm. Can anyone shed any light on this problem?
PowerMac 2x2.66Dual-Core Intel Xeon OSX 10.5.8 5Gb memory 232 GB hard drive with External LaCie HD connected
I've got an external HD. The first part is formatted to NTFS. The second part was formatted to FAT32. I plugged it in via Firewire and went to erase it to a journaled filesystem. It did something and left the drive unmounted. I could only format it to FAT32. Any ideas why I can't format it to journaled? I want to backup my user dir.
Edit: Tried another drive. 2 fat32 partitions. I tried to format the first and it didn't work. Formats to FAT32 well enough.
Just got a HD and I tried to format it to Mac OS Extended (journaled) From a MBR. After the erase is done it's still MBR!
HD Detail: Name : FUJITSU MHV2120BH Media Type : Disk Partition Map Scheme : Master Boot Record Disk Identifier : disk1 Media Name : FUJITSU MHV2120BH Media Media Type : Generic Connection Bus : USB USB Serial Number : 000000000033 Device Tree : /PCI0@0/USB7@1D,7/@3:0 Writable : Yes Ejectable : Yes Mac OS 9 Drivers Installed : No Location : External Total Capacity : 111.8 GB (120,034,123,776 Bytes) S.M.A.R.T. Status : Not Supported Disk Number : 1 Partition Number : 0
I've been having problems with 3 Maxtor 500GB 400/800/USB FW drives. They will randomly unmount themselves -- forcing me to turn them off, wait a minute, then turn them back on. There doesn't seem to be any pattern to when they unmount themselves. All three drives had been formatted using Mac OS Extended (Journaled), and I'm on the most recent version of Leopard.
Thinking I had 3 lemons, I called Seagate (who purchased Maxtor) for tech assistance. The tech guy told me that external drives should not be formatted using Journaled, only Mac OS Extended.
I just recently realized that my Seagate external HD is under Mac OS extended (journaled) and not Mac OS extended. I only want to use this device for storage/backup and don't want to run anything off of it. Is there any non-destructive way to change it to just extended? If not, what are some of my alternatives?
i backed up my hd via tm, now the backup fails, because tm says there's only 157gb free but it needs 350gb.the weird thing is, after i did the initial backup i didn't add 157 gb, so there should be enough free space and tm is supposed to delete backups if there's not enough space anymore.
i had this once some time back, i resized my tm hd and it backed up my whole hd, even though i had already backups.is the incremental backup technology faulty, or what?
when i plug in my external thats programmed to my mac, on a windows based computer i cant seem to read the hard drive. is there a program or somthing where i can detect it and transfer files between it?
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
I want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
I am dual booting XP Pro and OS X on my NC10. I have XP Pro installed on the main partition with a FAT32 partition for files that can be read by both OSes (see attached image for two views of the partitions). I then installed OS X on an extended partition. Unfortunately, I had another 5GB partition also on that extended partition. I now want to delete the spare 5GB partition and non-destructively reallocate the space for the OS X partition - I want to expand it to be one big partition with my bootable OS X install still on it. Unfortunately, I can't find any way to do this in Partition Magic. Is it possible with GParted/BootItNG/iPartition or any similar software? If so, which and how? The NC10 has no CD drive so solutions that work from OS X or XP or a bootable USB stick would be preferred.
Maybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
My entire I-tunes library is kept on an external HD that is formatted as MAC OS Extended (Case-Sensitive, Journaled). I formatted this external over a year ago when I moved to Mac per the genius's recommendation at the Apple Bar. Today, I had the sneaking suspicion that it was time to migrate to a new External HD as mine has some wear on it and I kept getting weird error messages during the transfer of the I-tunes library (meaning it just stops and give me a very windowesque error message).
What I have been able to tell is that MAC OS Extended (Case-Sensitive, Journaled) will not correctly transfer to regular old MAC OS (Journaled). Am I stuck in "Case-Sensitive" land forever with my I-tunes Library? Apple Care offered no advice except to point out the problem. I can format the new drive as Case-sensitive but then it appears that I'll be stuck with doing the same thing when I get another External HD in the future.
I got an external drive (NTFS). I want to use it for mac. Do I just partition it into 2 partitions? Or do I need to Erase it into one Mac Journalled volume first? I am erasing it now, it says its gonna take 12 hours. Or is erasing the first step. And then partitioning is the second step. Two distinct processes/operations, right? (I basically want two partitions on it, both OSX journalled. One for super super, and the other to maybe try sandbox or just storage or maybe time machine.
I've just bought a copy of windows 7. Just wondering if i install it via bootcamp now can i update bootcamp in a few weeks when apple releases windows 7 support or will i have to reinstall windows 7 when that happens ?
A question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
Does anyone know or have the same problem where pressing the F7, F8, F9 keys (which are previous, stop/pause, and forward) doesn't work in iTunes unless iTunes is the "active" window? I know that in OS X that if i pressed those buttons, it would do it even if I was in another application, but in the Windows 7 version it won't do it if another application is "active." Also, the same applies to the Apple Remote.
If you set up boot camp with run windows and then also want to run windows with parallel, do you need two licenses of Windows to do this? Or can both programs access the same instance of Windows?
after i get to the windows loading screen my mac just throws out a consistent high pitched sound and shows a black screen, i can only get into bootcamp windows when i unplug the computer and start it up with the running windows normally option. is this a virus?
So I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
Last night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I have installed Windows 7 on a Bootcamp partition and use VM Fusion as well, I am trying to get my Windows 7 desktop onto my Plasma TV when I have only Windows 7 booted.
I have a mini displayport to DVI adapter (not worried about sound right now) but when boot into Windows I cannot find the TV as a output setting.
It used to be with my old PC I would see the TV as a possible output and I could chose either Dualscreens or simply set the Plasma as the main display.
Could someone please help me achieve this with my iMac? Am I missing a driver or just missing a setting?
Basically, I created a BC partition for my W7, however, I only gave it 32gigs of space (I only wanted to use it for gaming).However, now I want to install Autodesk 3D Studio Max 2010 on W7, however I don't have enough space on my BC partition to do that...I've researched enough to know that I will need to use one of the following programs:I've read up on all the programs and done some research on them. Ive noticed most people are having problems with all of these programs when trying to backup a W7 image whilst on Snow Leapord (Mac OS x 10.6, which I am running)I know that is the function of the 3 applications above... But to my knowledge... In theory - I should be able to just backup my W7 using a reliable backup program (Can someone recommend any?) and then delete the existing BootCamp partition, create a new one of 100gig and then just load up the backed up image for Windows 7...
I have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
