Software :: Unable To Boot From Internal HD Afetr 10.6 Installer Stops?
Sep 22, 2009
I was installing 10.6 on my MBP running 10.5.8. I had launched the installer and after about 20 mins of the installation, my MBP rebooted launching the CD installer window. I went ahead and started the install and selected my internal HD. It starts the install and then gave me an error "Can't install on this HD." I went ahead and quit the installer and tried to start up from the internal HD. It starts up with the apple logo and progress circle but then just shuts back down again. I'm able to boot back up using the 10.6 installer CD, then using Terminal, navigate to see all my user files.
I guess my question is what's the best way to grab all my files off the internal hd so I can do a clean install of 10.6? I tried setting my MBP as a Firewire disk to grab the files but when connecting it to another mac, no disk drive is recognized. I thought about just launching Terminal and copying the files onto an external drive. Just wondering if that's the best route? Is there still a way to boot up from my internal HD to move my user files?
my macbook pro won't start up...it begins to boot up but stops short before the screen comes on. the light which indicates that the computer is on dims and the booting.stops.
Powerbook g4, internal keyboard fried. Using an external mac keyboard. Rebooted with disc - Coriolis CD Maker using iDefrag [URL]. Did a full defrag of internal harddrive. Unable to boot back from internal harddrive/ There are no options to do so.
I would either need a hardware way of restarting from main internal hd or a command while idefrag is working. Unable to eject cd as well.
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
I'm trying to make an OS X Lion boot disc. A failed Windows 8 Bootcamp install killed my Mac, but luckily I had a Time Machine backup which was accessible via the Recovery Disk. However, I would still like to have a boot disc handy in case something like this happens again and the Recovery Disk is somehow corrupted.
I Googled(among other things) how to make one, and the instructions seem fairly simple. Only, I can't find a Mac OS X Lion Installer anywhere. When I bought my refurbished iMac from Apple, OS X Lion was already on it. Since I didn't download it from the App Store it seems I don't have the Lion Installer to make a boot disc... Anything I can do (besides wasting $30 to redownload Lion from the App Store for the file) ?
I got a used MacBook Pro 2.53 GHz 17" (Mid-2010 - MC024LL/A - MacBookPro6,1 - A1297) running Lion only.
I want to put Snow Leopard on one of the partitions, because I still need to use Rosetta from time to time. The computer didn't come with any installer disks... "no problem," I thought, because I own a Snow Leopard installer DVD (which says "Version 10.6" on it).
But it won't boot from that DVD. The Apple logo stayed on the screen for seven minutes before I gave up.
Is that because this computer requires a later version of Snow Leopard?
What are my options for getting Snow Leopard onto this thing?
I have a 2-yr old MBP 3,1 (the first Santa Rosa line) which has recently hit a slew of problems (bad fan, new display, new hdd, new logic board) over the last 3 months. I thought all was fixed then yesterday it suddenly dies, starts kernel panicking on boot, and I can't even boot from an installer disk. I took it in to the Genius Bar today and the guy puts a stick of their RAM in and it seems to work +/- ok. He won't do any more until I put the original RAM back in (upgraded to 4 gigs a year ago). I take the laptop home, and it magically starts working. I grab a couple backups and it starts kernel panicking again so I grab my original RAM and put it in. Now it's still kernel panicking and I'm effectively completely locked out of my MacBook Pro (the RAM worked fine in my wife's 3-year-old MacBook which takes memory of the same specs).
i'm attempting to load win7 onto my MAC. Thus far i have downloaded the .iso image off MSDN (throught my university, for all intents and purposes should be as legitimate as an off the shelf copy) and burned it to DVD as a bootable disc image. however for some reason when using Boot Camp im told "The installer disc could not be found".There is data on the disc however when i go into the disc via finder it appears empty (no icons)... even though it is not (get info > xyzMB used).
Installer is unable to open the package. This is likely due to Install framework's runner executable not having the proper ownership and/or permissions.
when i am booting up my macbook pro it will just stall at just before half way and i will have to shutdown and turn on again. It will happen 3-5 times until it finally works. But sometimes it works the first time. This started to happen about 1 month ago after i installed OS X Yosemite.
Macs Console says this every time I try to update from 10.6.7 - 10.6.8 "10:08 PM Installer[244] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." I can't update what so ever... every application basically needs to be manually installed or just comes to an unknown error either restarting the Mac or going through standalone...
i have a big problem with my MBP 13". I install Mac os x (try also Maveriks) on a HDD drive it works fine, but when i put this HDD inside (internal) it won't boot.
My daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off.
My IMAC will not boot up. It was working fine this morning and I was working away then suddenly a MUSIC file wouldnt play, so I restarted the computer, and this is what happens now...It starts out like normal but after a period of showing me the APPLE logo it goes to the "NO" symbol. url...
At first, I tried to upgrade and the upgrade failed to the point of rendering the system useless. I then decided to reformat the drive using disk utility and try a clean install. I then got this error and I'm stuck and have no clue what to do now: "The installer can't extract files from the package for BaseSystem. Contact the software manufacturer for assistance." I have never encountered anything like this before.
Most of the time I charge when I get to 99%, it stays that way even if I leave it charging at 99% for a good amount of time. Anyone have this problem? Should I just take out my charger at 99% or what do you think I should do?
Then I can reboot work for half an hour until battery is like 50% then it shuts off again... then I can reboot again and work for some more time. I've checked with coconut battery and when the computer stops at 70% I still have like 1700 mAh...I've reset PRAM, power management, etc...
Of course my battery is old, but it should work until 00%... not stop at 70%. Before I spend like 100$ (that is what a macbook pro battery costs here in Mexico) I'm willing to try anything...
My girlfriend's 06 or 07 white macbook is starting to stop charging pretty often. Sometimes toying with the plug or turning it around fixes it, but then it will stop again. She tried it with my roommates plug which seemed to work fine.
I got the 64bit version of windows 7 from my the Microsoft Acedmic Alliance program. I downloaded it on my parents windows machine burned the .iso with nero and I went throught the boot camp assistant it asked me to put in the disk. the computer rebooted and then it was a black screen. The
The disk is a bootable disk because I used the same disk to install it on my parents windows laptop.
Tonight I came into my office and my PowerBook was sleeping. I have an external display and I usually turn my display on and wiggle the mouse (after I turn that on) and nothing happened. I looked and my display was still in standby mode, my wacom and eye tv had the same behavior. The powerbook light stopped blinking (I heard the drive wake) and then nothing. Nothing happened still. I opened the lid, hit the power button and still nothing. Held it down, and nothing. I ended up having to take the battery out and then I started the machine. Since then I've rebooted twice just for fun and since then the below screenshot shows that the "Jessica's Computer" window keeps popping up.
Two questions: #1 What could have happened or what does it mean when the powerbook is sleeping, then wakes but never really wakes and just shuts off?
#2 What is up with that window opening as though this is some sort of start up program you'd find in windows?
Specs: Powerbook 1.67 ghz second to last rev...rev D I think. 1.5 gig ram. os 10.4.7
I have a mid-2008 (June) MBP 15". Just upgraded to SL last night. I am having a serious issue with time machine. I've been using it with the same external HD since I bought my mac last year. No issues up until I installed SL last night. This morning (my first backup since upgrading), time machine started backing up (~ 9Gb) but just stops at around 300Mb. The clock keeps spinning, but there is no change in the amount backed up.
I'm reading that other folks are having this issue as well. Has anyone figured something out?I've run disk repair (nothing found), restarted my mac & external HD (several times each), and cancelled and restarted the time machine backup (several times). Each time it freezes at a different amount (i.e. 34Mb, 284.2Mb, etc...).
On a day-to-day basis I run: Adobe PS, INDD, and AI, Microsoft Entourage, Firefox and iTunes. Just recently, after an upgrade to Leopard, I added Things and Simplify Media to the list.The problem that happens before (on Tiger) and now (on Leopard) is command+tab switching stops functioning and Expose hot corners and shortcuts stop working.
I'm pretty sure this isn't a Finder crash because before, on Tiger, I could quit+restart Firefox and everything would be back to normal. Almost as if some shortcut had causes the system to act differently or there was some app dissonance?
But now, with Leopard, nothing I quit will cause these two features to act properly until I do a restart. Both features (command+tab switching and expose) are very necessary for my work flow. I have checked SysPref to make sure keyboard shortcuts are default and Univeral Access to make sure assisted devices is turned off.
I received an Acomdata 2Tb external hard drive today from Amazon and plugged it in. Time Machine popped up and I declined to link the hard drive to it. I went into Disk Utility and chose the new hard drive on the left column and went to erase. I chose Mac OS Extended. I named it and hit erase. It started going, and going..... and going... and a half an hour later I knew something was wrong.
Disk Utility was not responding and I eventually had to Force Quit. Now I cannot format the hard drive. I starts and then it stops with a disk error. I tried to run the First Aid verify and repair and both stopped after a few seconds with an error. What do I do?
I have a 12" Powerbook G4 running 10.3.9 Panther. I am having problem booting my computer from a Firewire HD. I have done a search in the forum but cannot get a definite and/or successul solution. Forum moderators and my respected macrumor fellows, please feel free to direct me to a specific link if you find the questions redundant.Recently, I have had the HD making terrible noise and several days ago, the computer cannot boot at all. When I pushed the power button, the screen shows a folder in the middle with a Mac face and switches to a question mark back and forth. However, it just gets stuck at that stage. I suspected that I have a HD problem and wanted to boot from my clone Firewire HD. Unfortunately, the computer will not boot with Firewire HD either.
I have owned a Mac Mini for three years now (my friends convinced me to try the Apple way and this is my first Mac). The CD/DVD died just three weeks after warranty expired and Apple said (in essence) 'tough crap...you didn't buy AppleCare'.I have functioned without a CD/DVD drive since then, and everything was fine... until a week or two ago. We installed an update in iTunes, and everything started running S...L...O...W... So, we rebooted the computer! Instead of rebooting, it made the "bong!" sound and then a screen with an apple and a spinning wheel runs indefinitely. We let it run all night the first time and it stays on that screen for as long as you let it.
I started this situation with a bootable hard drive that I removed from a 4,1 (mid 2008) and a brand new unibody MacBook Pro. What I wanted to do was use Carbon Copy Cloner to clone the old drive to the new MBP. I used CCC to clone the drive to the new one and repaired permissions on the internal drive and tried booting from it. No Luck. I figured this was stupid to do and I could just use migration assistant so I decided to reinstall Leopard on the unibody. Unfortunately when I attempt to boot from the DVD it doesn't go past a blank grey screen. I also tried holding down option to open the boot manager and select the DVD, when hit enter over the DVD it freezes. The interesting thing is that when I connect the old drive to the unibody using an enclosure I can boot from the external drive no problem. I tried using another computer to install leopard on the unibody over firewire and the installation went fine but when I start the unibody it doesn't go past a blank grey screen. I am also positive the hard drive isn't damaged or anything because when I go to the boot manager after leopard is installed the internal drive shows up but when I select it, it freezes. I have tried resetting the PRAM, NVRAM, repairing the disk (which is successful). When I try to boot into single user mode the computer freezes when loading the text. Another interesting thing is that when do boot from the external drive it goes through verbose mode every time and I never choose to do that. Right now I am attempting to clone drive using Super Duper to new drive and see what happens.
