my macbook pro won't start up...it begins to boot up but stops short before the screen comes on. the light which indicates that the computer is on dims and the booting.stops.Â
Info:
MacBook Pro
The other day my 1st gen MBP functioned without any probs, until it suddenly powered down. After I removed the question marks from my eyes, I offcourse tried to reboot it.
But it never makes it beyond the grey screen, sometimes untill the apple logo, sometimes not even that far.
Offcours I googled around first to gather some info before I decided to put this problem down on this board. I found this could be a HDD failure, but in those cases, with other people, it could be powered holding apple + s, and doing some checks that way.
Mine doesn't even come that far
I have a second hand 1st gen MBP with upgraded HDD and RAM, snow leopard, and coincidently since last week no more battery... so i may have powered down a completely unprepared mac by tripping over the wire, once or twice...
I have just started to have problems every time I go to sync my wifes and my IPhones, IPads and IPods. I-Tunes recognizes the units, begins to sync and shuts down ITunes every time I try and sync. I have reset our phones and have all the most current versions of ITunes and my accessories OS.
View 1 Replies View RelatedI own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.
Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.
I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:
1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now
This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.
What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).
I was installing 10.6 on my MBP running 10.5.8. I had launched the installer and after about 20 mins of the installation, my MBP rebooted launching the CD installer window. I went ahead and started the install and selected my internal HD. It starts the install and then gave me an error "Can't install on this HD." I went ahead and quit the installer and tried to start up from the internal HD. It starts up with the apple logo and progress circle but then just shuts back down again. I'm able to boot back up using the 10.6 installer CD, then using Terminal, navigate to see all my user files.
I guess my question is what's the best way to grab all my files off the internal hd so I can do a clean install of 10.6? I tried setting my MBP as a Firewire disk to grab the files but when connecting it to another mac, no disk drive is recognized. I thought about just launching Terminal and copying the files onto an external drive. Just wondering if that's the best route? Is there still a way to boot up from my internal HD to move my user files?
My IMAC will not boot up. It was working fine this morning and I was working away then suddenly a MUSIC file wouldnt play, so I restarted the computer, and this is what happens now...It starts out like normal but after a period of showing me the APPLE logo it goes to the "NO" symbol. url...
Info:
iMac, Mac OS X (10.7.3), Snow Leopard
My computer has a problem on the screen. After half an hour of use strange white glare that remain in the bottom begins to appear. When disconnecting the unit from one day to the next, but these glosses disappear within a half hour of use reappear. Why does it happen? Will it be a failure of manufacture? The device is 2013 What should I do
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
just using my new MBP today and twice when turning it on it started to boot up and got as far as the blue screen (just before the desktop pic and stayed there.Is this normal sometimes?
View 1 Replies View RelatedI have a weird problem with my MacBook Air. I was browsing the web when I think I hit a wrong keyboard combination. I was trying to select text cmd+a. But a small white window popped up with some text. After that safari started acting weird. Whenever I tried to open a new link it did not simply open the link like usual. But it downloaded it into my download folder. I also noticed that I could only type special symbols.
So I tried to reboot my MacBook Air. Usually it boots right to the login screen. But now it first shows a startup screen where I can select a boot device. So I select macintosh HD and it boots up like normal. But I can still only type weird symbols so I cant login. First I thought maybe my alt key is stuck but it works just fine and I did not do anything with it.
Info:
MacBook Air, Mac OS X (10.6.8)
At start up the screen is very dark, so I can't log in to my account, because I can't see the arrow. I tried to make the screen more bright with fn F2, but that doesn't work. How can I have a bright screen at start up, so that I can see what I'm doing?
Info:
MacBook Pro, Mac OS X (10.7.3)
Yesterday I was helping someone getting to know their MacBook Pro (early 2008, Intel core 2 duo 2.4GHz, Mac OS X 10.5.2). I installed Perian and Flip4Mac and Firefox 3.6. I also checked for updates because she's on a very old version. I tried downloading the updates, but because we had a very bad internet connection I stopped the download quite early on and told her to do it at home. However after I left she tried to shut down the computer but it hanged. She manually shut it down using the power button. When she tried to turn it on again she got a kernel panic message saying she should reboot. This however didn't work.
Now I've tried all sorts of things. I've removed Perian and Flip4Mac manually. I did a disk verification (all was well) and a permissions verification and repair. I tried booting in safe mode (still won't boot) clearing the SMC and resetting PRAM, none of it worked. I just wanted to check here first before either taking it to an Apple store or reinstalling Mac OS X. I've read on forums about hardware failing (RAM mostly). No idea if that's the case. I tried a hardware test, but I don't have her DVDs and used my own with version 10.5.5. The Standard test said it was all ok, but the extended test seemed to hang. I could ask for her own DVDs which I will need anyway if I'm going to reinstall Mac OS X.
Some details of the kernel panic:
The error code is: 0x000000010
Apart from that it says the following:
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(76.2.0)@0x2e63c000->0x2e65afff
And later on it says: Mac OS version: Not yet set.
And of course it shows some more info with lots of hex codes, I can type them out for you if you like, but I read elsewhere that the error message is usually not very useful. Would you recommend going to an Apple store to see if the RAM is faulty? Or do a reinstall of Mac OS X?
when I went to restart the computer so those updates would take effect, during the start up process, all I continually see is the Windows XP scrolling status bar, I shrugged figuring it had a bit to do and left it to its own devices, and a half hour later returned to see the same scrolling progress screen. (before choosing which account to log into for windows).
View 6 Replies View RelatedSo I installed osx 10.4 server on a Power Mac G4 (white/blue)
Went throught the setup screens and did a complete reformat / install.
Just boots to the loader screen. (Where the mac face shows, followed by a question mark) and just cycles over and over.
I can put the DVD in at this point and restart the install.. I did go in and check the disk permissions and disk status and both passed.
I just got a new MBP i7, and whenever the graphics switch from the Nvidia 330m chip to the Intel chip, the screen "flickers" black for a short moment before reappearing. Can anyone with a new MBP comment on this behavior? It doesn't happen on the switch from Intel->Nvidia, just the other way around.
View 3 Replies View Relatedsome reason my Macbook Pro 15' inch won't start up. It's stuck at the blue loading screen after the gray Apple. The screen switches from two blue colors every 5 seconds or so along with a loading symbol. Sometimes I can see my mouse and use it, but that's all what is happening. The last thing I did was installing the newest video driver on my Boot Camp. (Windows 7 - 32bit and Leopard 10.5 for mac)
I can still start up Windows 7 without a problem on Boot Camp, so it doesn't seems a hardware issue. I already tried some stuff found on the internet, but I can't start up 10.5 in normal or safe mode.
My macbook pro won't boot past the grey screen, I've tried reseting PRam, running fsck from single user etc to no avail. All signs would point towards a hard disk failure, but the curious thing is that it sometimes mounts in disk utility when booting from the install CD, so theres a little life left in it yet! I have fairly recent backups of most of my files, but there are a couple I've been working on in the past few days that won't be backed up. So my question is this - is it possible to copy files from my mac HD onto a external drive through the terminal/disk utility while booting from the CD.
View 6 Replies View RelatedMy daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off.Â
Info:
MacBook Pro (15-inch Early 2011), iOS 5.0.1
I woke up to my MacBook fan going nuts. Had an error message on the screen that said something about a disk error. The machine wouldn't do anything (force quit, launch app) so I hard powered down. Now.....NOTHING. All I get is the white screen, followed by the flashing folder. Here is what I have tried so far.
I already booted from the restore cd that came with it and opened disk utility. The hard drive shows up as something like disk1 but not "Macintosh HD."Tried to repair permissions and got an error message. Thought then to do an archive and install......and the HDD isn't even a viable option to install the OS on.
I had the original (but smaller) HDD that came with my MacBook, so I put it back in and everything booted up just fine and is back up and running. (Thank God for MobleMe that had all my contacts, etc on it). But I still have some info on that other HDD that I need. I ordered a usb enclosure for the drive to maybe try some recovery, but it seems to me that the HDD failed or something. Is there anything else I can do?
On my old mac .version 10.4.11 about 3 years old. I was able to email short videos, I've since upgraded to the new IMac version 10.6.2 snow leopard and finding that I can no longer email these short video clips? Nothing has changed as far as my internet provider, only a new Mac.
View 2 Replies View Relatedhow to capture scren on MAC lion OS, in old OS it was possible by shift+CMD+3 option but in lion its not possible.
Info:
MB466LL/A, Iphone OS3.0
My imac is about 18 months old. Latest software download.Will not start up properly. After the Apple Logo, sign comes up on the screen stating "startup disk is full".
Info:iMac
My iMac (27", late 2013, Yosemite) starts using the power button. A black screen, white Apple logo and progress bar appear. When progress is at ca. 50% the computer powers off.
Info:
iMac, OS X Yosemite (10.10.1)
Most of the time I charge when I get to 99%, it stays that way even if I leave it charging at 99% for a good amount of time. Anyone have this problem? Should I just take out my charger at 99% or what do you think I should do?
View 5 Replies View RelatedI turned my 2011 iMac on this morning but it never loaded past the startup screen. Eventually the Apple icon which is usually displayed on the screen turned into the broken folder symbol. I read some articles on how to fix this and tried resetting the NVRAM and PRAM, but that didn't work. I was going to try reinstalling OS X next, but putting the disc into the driver doesn't appear to do anything, and now I can't eject it.
Info:
iMac, Mac OS X (10.6.7)
Im trying to reinstall osx from my flash drive. The problem im having is after i hold option and click on the flash drive icon to boot it, nothing happens the arrow icon greys out like its being click, but it does nothing.
I also tried installing from the dvd with the same result. Im posting here because I searched google far and wide and have come up with nothing. Anyone know whats going on here?
my iMac doesn't startup, it stops in the grey apple and the spinning gear !!!
Info:
iMac, Mac OS X (10.6.8)
My brother's iBook G4 (I think it's a 2003 model) has a problem with the screen. When the computer is turned on, the screen stays black, although the backlight is on (the apple glows). Sometimes, on start up, the screen works normally for a random amount of time before going fuzzy and then black again.
Any ideas on how to fix this? Is it likely to be a problem with the hardware in the actual computer, or just the screen? Or is it a software thing?
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
I accidently did something that made Safari go full screen and the top navigation with the Apple icon, File, Edit etc, menu disappeared. I pressed esc to go back to normal viewing mode. Â
1. What did I do/what keys make this happen?
2. Does this work with all programs?Â
I am having trouble starting my 21" iMac running Snow Leopard after I had shared the HD with my MB-Pro. I had removed the "everyone - Read Only" rights on the HD (on the iMac) and opened sharing so my MB could attach to it. Grey Apple Logo and progress circle upon startup now.Can changing these rights cause the system to not boot? I can go into single user mode but I am not sure what to do then.
Info:
iMac, Mac OS X (10.7)
