I use Adium 1.3.10 which normally could send message to offline user and my ex-girlfriend use Adium as well but I dont know which version. I sent really important message to my ex-girlfriend while she is offline and TWO HOURS later this message pop up to me.
"Message was not sent because the system is unavailable. This normally happens when the user is blocked or does not exist." But I did not block her and she does exist So I'm not sure she will receive this message or not. the strange thing that I worry is it was bounced TWO HOURS LATER AFTER I SENT IT,Has anyone experienced this case??? What I really am worry is the message will be sent to her or not?
(Using OSX 10.5.7 on MacBook, Comcast cable modem):For the pst 24 hours I have not been able to connect to my Entourage email account, which denies every combination of letters and numbers, upper and lower case, of my formerly reliable password. System tries to log in, then gives me the error message "invalid username/password." I can't find a "forgot password" link or otherwise change the password. If I try Mac mail I get "system timed out." I can use webmail to get password but not Entourage or Mac Mail.
trying to intsall a firmware update for my camera. using stuffit and a .fir file.i am getting an error message that the destination folder is on a locked volume. have repaired permissions and looked at the folder and opened it up so everyone can change it and no joy.
On a Mac OS X 10.4.11. laptop. ISP provider is Comcast. Have successfully been sending and receiving emails at home no problem using Entourage for two years. Have now taken laptop to visit away from home and clicked into the host's house wifi system - AT&T u-vers.
Entourage will now receive but not send emails. Receive 3259 error message about timing out. However, can send fine by going to Comcast's site, therefore Comcast insists this is not their problem but an Entourage problem, probably with settings.
In Mail preferences I have message font set to Verdana and in the 'Composing' pane I have ensured that messages are sent as Rich Text, and yet I have a persistent and frustrating problem with Mail.app failing to apply font formatting to outgoing messages. When composing new messages everything looks fine (i.e. text displays in Verdana), but Mail isn't applying the formatting to emails; looking at the raw source of sent messages, Mail seems to be sending Plain Text messages with no formatting applied:
Code: Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v936) Further adding to my confusion, if I append a formatted signature (configured in Mail preferences) to messages, the signature IS correctly formatted (in Verdana, no less).....
Somehow a setting got switched so now whenever I reply to a message, a copy of that message is automatically sent to my inbox as a "new message."
It used to be this would only occur when I hit "reply all" - but now it is all the time. I have looked through mail preferences, but am not seeing the fix.
I just downloaded Magnifique 2.1 for my Mac (Macbook, 13-inch, 2 gigs of RAM, Mac OS X 10.5). As soon as I open the application, I get an error message saying this:
Applescript Error System Events got an error: Some data was the wrong type. (-1703)
The downloadable theme gallery won't show as well. This same message appears if I try to search for any themes and appears every time I type a letter or two into the search bar in the application. Is there any way to fix this? I have tried re-installation but it doesn't work.
I have created a word document and opened the data file. .csv (also tried a txt file) name, add1, add2, add3 through to add6 is the header. The error message is this . . .It said something like record 16 has not got the same fields as the header. Now I only get the one below.
I have been using FCP for quite a while now and just recently when I was trying to exporting a SD movie I got the message, "Error: Out of Memory".
Thinking I maybe had to many programs open I restarted the computer. That didn't work, so I shut down again and reset the memory.
Since that didn't work either, I transferred the files to second compute, but got the same message. Finally tracking the problem down I removed the effect "Line Art" and was able to export.
But I would really like to have the effect on the clip, any ideas on what is going on here?
I am trying to burn a 4.2 GB project in iDVD. My project is saved onto an external hard drive, and when I start it burning, I get an error message that says "Not enough free disk space for encoding the remaining assets." It says I only have 825 MB available on my hard drive and 3.362 are needed for encoding, but I actually have 786 GB free! Any idea what could be causing this?
This might be the weirdest software bug I've ever seen. It looks like maybe a programmer for Microsoft was having some fun. Here is what happens:
A spreadsheet that a coworker uses for purchase order requests has several cells in a column with a SUM field that calculates the number of units to purchase multiplied by the unit price (not sure why they use SUM for just a multiplication, but I don't know if that matters).
If you delete the contents of one of these cells and type in something else (or just type something else without deleting first), then exit the cell, an error message pops up that says, "You can't do that!!!!! So quit trying!!!" with options Cancel and Retry.
Retry doesn't do anything, Cancel clears what you put in the cell. Copying and pasting the cells into a different row creates the same issue.
I've attached several screen shots to show steps to reproduce: Picture 1 - column F has the suspicious cells Picture 2 - the calculation Picture 3 - after deleting the contents Picture 4 - enter some text, before exiting the cell Picture 5 - error message after exiting the cell
The only workaround was deleting the entire row and entering those calculations again. I have no idea what to make of this, and internet searches have come up empty.
I have an iMac running Snow Leopard. I did a clean install.
Afterwards, I tried to install the Applications Install DVD, it opend the DVD, after I select the icon, Ireceive an error message that the install failed.
I have been using Toast since it first came out and I have really enjoyed the latest version as well. However about a month ago Toast 8 just quit launching. It just bounces in the dock then disappears. I tried the one on my backup drive and it does the same thing. I have a Powerbook G4 17" 1.67ngz with 1 GB RAM. I installed Toast 8 on my girlfriends IMAc 24" Intel and it still works perfectly. I've looked on the Interweb and found some similar complaints but now solutions.
I have uninstalled and reinstalled multiple times with no luck. I even tried an older version I have and it didn't work either. All the bundled applications that come with Toast 8 with the except of CD Spin Doctor work fine. When I try to launch CD Spin Doctor I get this error message: This application requires Toast 8 Titanium or later to run on your system. The application will now quit. I have Toast 8 Titanium right freaking here" it just won't load... no error message for it however.
I just purchased my second mac (iMac 24" screen) which has finally made me free from windows. So one of my first things I did was put my 10 year 30,000 photo collection into iPhoto... Everything worked fine except I'm having one problem.... Apparently there were 15 files that were messed up and didn't get imported. Thats fine and no big deal, I can do without them. The problem is EVERYTIME I open iPhoto I get the error message....
Photos have been found in the iPhoto library that were not imported. Would you like to import them?This has a yes or no question.... If I say yes, iphoto will create an "album" that is empty with no photos entitled "recovered photos" and give me the error message....Unreadable FilesThe following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)
If I choose NO, then iPhoto will give me this message....The photos have been placed in the folder /Users/ks72/Pictures/iPhoto Library Recovered Photos_3.
I'm find with trashing these photos and you think after iPhoto placed them in the folder it would stop but it happens EVERYTIME I open iPhoto... I found one thing online somewhere that was partially relevant and it said "go into your iphoto library and find the actual data files which might be difficult due to the naming system and delete them" but how do I go INTO the iphoto library. Everytime I go in my pictures folder and click on the iPhoto library it will just open iPhoto.... am using the latest versions of leopard and iphoto.
Regardless of account used - all outbound messages are failing to reach recipient - and if CC'd to myself - not receiving them either. Have tried various test messages - and no luck.
Can other people using Gmail through their Mac desktop mail tell me if its sending? It appears I can receive but I cannot send. Maybe I did something wrong? Although I haven't touched the settings.
I just opened a FC project in 6.0 from an XML file for the first time. The project originally came from 6.0.6 and I was happy to see that this kind of reversion was actually possible. Unfortunatly after doing a little work I started getting "general error" messages whenever I tried to save the project or render any transitions.
If I remeber correctly, I opened the XML and was asked to save a new project. I saved the project and started working. I dont remeber if any saves or rendering had worked in the new project before I got the error messages. Maybe none of them worked, I am not sure.
I have experience doing this with a PC and it was an absolute chore. Do macs do it better. To fill in, I want to be able to send a 30sec video clip at a concert to a crowd of about 500-1000. Will I need to get a USB booster to send the signal? Can anyone recommend some software to use? Any one have any experience of doing something like this?
I have a little problem with one of my applications. The application is very important for me and I need it nearly every day. But now it shows my an error message. 'JVM terminated. Exit code=-1' [...]
I'm using Mac OS X 10.6.4 and my system is up to date.
I have an iBook G4 that's running Tiger 10.4.11 and the most recent version of Safari and just recently when I try to open up some web pages I get the error message "Safari can't open the page "http://whateverthewebaddressis" because it can't find the server". It will open some pages, some of the time and then a few minutes later if I try to open it again it will give me the error message. It is not a problem with my internet, as I also have a new iMac running leopard and Safari has never had a problem opening the same pages at the same time.
I would like to send email attachments as actual attachments rather than embedded in the body of the message. I tried typing "defaults write com.apple.mail DisableInlineAttachmentViewing -tool yes" in Applications/Utilities/Terminal which I thought had worked before, but no luck now.
Is there a size limit for importing an Excel File into Numbers? The error message says the file is too large. Has this been changed in i-work 09? The file has multiple sheets that refer to each other, but i can't even open at this point. It is 3.1 MB.
I keep getting the following error message when attempting to sync my contacts, calendar, and bookmarks with my iPhone. When I check these under the "info" tab and ciick apply, the following error message appears:
iTunes cannot sync information with the iPhone because syncing has been disabled on this computer. Do you want to enable syncing? If you do not enable syncing, iTunes will not be able to sync contacts, calendars, bookmarks or mail accounts to your iPhone.
When I click yes, the following prompt appears:
*Syncing cannot be enable on this compute*r. The options I'm presented with are:
override and Ok.
When I click override, it takes away my selections to sync contacts, calendars, etc.
I have never disabled syncing. I've looked through system and iTunes preferences and can't even find an option to disable/enable syncing.
I'm attempting to setup up MobileMe and need to get this problem resolved.
