Software :: PowerPC G4 Crashes At Wake Up
Jul 13, 2008
I am running os 10.4.11 on a g4 dual 1 ghz powerpc g4 with 1mb l3 cache and 512 mb ram. Ever morning when I try to wake the computer up it crashed. I get a screen full of black bars with white text. Such stuff as "corrupt skip list code= 00000007 and exception state (sv=0x1ceb500)
I have booted from system cd and ran utilities. I have ran onyx. I have reinsalled the system from the cd and re-updated the system still with the same results.
View 7 Replies
ADVERTISEMENT
Oct 3, 2010
My version of InDesign CS4, will always crash after sleeping, especially when I have files open from a server volume. I've turned off the sleep hard disks when possible option in sys prefs.
Here is the interesting part of the crash log:
0 PublicLib.dylib 0x010eaf97
ProtectiveShutdown::~ProtectiveShutdown() + 279
1 DataBaseLib.dylib 0x0106deda
SUIDS::HandleLostNetConnect(IDFile const&) + 122
This never used to happen before when leaving files open from a server volume and sleeping.
View 1 Replies
View Related
Oct 20, 2007
I've been fighting bad sleep crashes for over a year. Sometimes it would freeze when it started sleep, sometimes when trying to wake from a sleep. I've spent countless hours researching the problem, reading everything on the boards. I tried resetting the PMU, turning off Bluetooth, removing all USB, and all of the other suggestions. Nothing alleviated the problem. Last week I replaced the lithium battery on the mother board because it wasn't keeping the correct time. So far it is sleeping and waking perfectly for the first time in ages. No more freezes or jet engine fans. I have my fingers crossed. Power Mac G5 dual 2 GHz, purchased June, 2003
Information:
Dual G5
View 1 Replies
View Related
Aug 4, 2008
I have an iBook G4 running OS 10.4.11, that has just had the hard drive replaced. When the computer goes to sleep it will not wake up, an in order to restart it I have to disconnect the power adapter and close it. I have it set to put the computer to sleep never, but eventually the computer--or at least the display--will sleep and not wake up without a restart.
View 2 Replies
View Related
Jan 10, 2010
In the past month, my usually trusty G5 has taken up a bad habit of refusing to sleep properly. About one time in twenty, it will shut down the displays but not (as far as I can tell) anything else (fans still spinning, pulsating light won't come on). And it will refuse to wake up: I'll be forced to shut it down by holding the power button. I can't reproduce this reliably, so it's a little difficult to troubleshoot, naturally. Any hints of things I should look at or try doing? Current peripherals are: Cinema display; Dell monitor; Logitech RF wireless keyboard / mouse; FW400 hard drive; USB2 hard drive; Logitech 2.1 speaker system; sometimes iPod mini. (I don't think it's the iPod. It used to sometimes wake itself back up immediately after sleeping with the iPod plugged in, but this new problem has happened both with and without the iPod attached.)
View 9 Replies
View Related
Aug 12, 2006
My G4 Rev E PowerBook won't wake from sleep. The battery died and the computer slept, but now when I boot it, it gets to 3.5 progress bars and freezes. I have tried rebooting but I can't seem to get out of the resume from sleep mode.
Any ideas? It doesn't show the grey Apple screen like it does from a fresh boot, just the progress bars that show up when the battery dies.
View 1 Replies
View Related
Nov 16, 2008
when i close the lid it goes to sleep properly but then it won't wake back up. anything special i got to press at all?
View 2 Replies
View Related
Aug 6, 2008
Recently my powerbook g4 aluminum 15" won't wake from sleep mode, and i can't turn it off with the button. When the computer does turn off the only way i can get it back on is to open it up and reset the logic board by disconnecting the back up battery for a little bit. I've tried reseting the PMU,
View 6 Replies
View Related
Apr 7, 2009
I have a PowerBook 12" on Tiger, 10.4.11. It is having occurrences of waking despite the closed cover. The cycles of wake/sleep are sometimes quite fast (seconds). I fear thrashing the HD. Here are excerpts from system log, followed by console log. The latter shows repeated instances of: AlsPB12 /usr/sbin/AppleFileServer: AppleFileServer ResetATalkService race detected. Which seems to implicate ATalk - is that AppleTalk? What relevance does AppleTalk have in today's systems?
System.log:
Description: System events log
Size: 1.04 MB
Last Modified: 4/7/09 8:43 AM
Location: /var/log/system.log
Recent Contents: ...
Information:
iMac 2.8GHz 2008
Tiger on G4/1.25DP FW800
Mini-1.66GHz; PB-G4 12
Pismo G3
Mac OS X (10.5.6)
View 1 Replies
View Related
Dec 30, 2009
I have a PowerMac G5 2.0Ghz Dual Processor system that I m using with the newer slim Apple Keyboard and Apple Optical mouse. When I try to "wake" the G5 from sleep with either the mouse or keyboard, it wakes up, and simply goes back into sleep mode, however, if I "wake" the G5 from the power button it remains awake.
View 2 Replies
View Related
Jan 14, 2010
When I try to print from my Powerbook G4 to my HP 6500 wireless printer it will not work. I have found out that if I turn off/on the printer then it will print. So, it must be an issue with the computer not waking the printer from a sleep mode. Anyone have a solution to this that doesn't consist of me turning off then on the printer? I have tried to reinstall a few times with no avail.
View 2 Replies
View Related
Jul 13, 2010
This problem just started happening on my 2005 Power Mac G5 Dual 2.3Ghz Processors.
I activate sleep, and it refuses to wake up again. Then after a few minutes the fans slowly increase in speed until the computer begins to sound like an aeroplane taking off, at which point I'm forced to perform a forced shutdown.
I've resetted the PMU and it doesn't seem to have worked. It is fully up-to-date in Software Update and is running the latest version of OS X Leopard.
View 4 Replies
View Related
Jun 28, 2007
About a week ago I received my new battery due to the recall. The last few days my power book has been great when I open my power book today it will not wake up. So i figured I would plug it in. The light stays green, does not change to orange, and still continues not to wake up. Even taking the battery out and trying to turn it doesn't work. Power cord stays green then as well.
View 4 Replies
View Related
Sep 2, 2010
O/S 10.4.11 Itunes 9.2.1 (5) Quick time 7.6.9
I need a quick solution: Need to burn music for my upcoming wedding.
CD/DVD burner works outside of Itunes.
When trying to burn a CD in Itunes it crashes and asks if you would like to restart it.
Not the factory CD: But as stated above does work outside of Itunes.
Music is not locked either
Any Ideas anyone.
P.S Please note I have been told? This could be an issue with Itunes 9.2.1 not liking O/S 10.4.1 can anyone confirm.
Also I am thinking about getting a power G5 Desktop would I have this problem running O/S 10.4 and Itunes 9.2.1
View 2 Replies
View Related
Nov 21, 2010
So I'm new in this forum and I've got a HUGE problem with Youtube and my iBook G4 that started recently.
Whenever I enter to Youtube and start loading any video, the system crashes, not only Safari but any application that is open at the time.
I've uninstalled and installed Flash Player, updated the system and Safari as well as tried using another browser (Firefox) with no results.
When I disable Javascript from Safari the system does not crash and another thing I noticed is that I can watch embedded videos on other pages but not directly on Youtube.
View 11 Replies
View Related
Jun 20, 2008
My iBook g4 has started to producing a grayed out screen and a message saying I need to hold down the power button to restart. I have all my documents backed up so the first thing I did was a clean install of Leopard. That has not stopped the problem. I have copied the info from the log the computer would like to send to Apple. Can anyone tell me what it means?
Fri Jun 20 11:54:02 2008
panic(cpu 0 caller 0x000AED04): "Uncorrectable machine check: pc = 0000000000BE2918, msr = 0000000000149030, dsisr = 42000000, dar = 000000001F3B8000
" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
" " L2FIR = 0000000000000000, BusFir = 0000000000000000
"@/SourceCache/xnu/xnu-1228.5.18/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace: 0x0009B498 0x0009BE3C 0x00029DD8 0x000AED04 0x000AEF84 0x000B2A78
Proceeding back via exception chain: Exception state (sv=0x2a4a9a00)
PC=0x00BE2918; MSR=0x00149030; DAR=0x1F3B8000; DSISR=0x42000000; LR=0x00BE2A00; R1=0x1E93FBA0; XCP=0x00000008 (0x200 - Machine check)
Backtrace: 0x00946170 0x00C3B5E0 0x00C3BF4C 0x00BDBEC4 0x00357748 0x003569AC 0x00356A60 0x000B05D4
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleKauaiATA(1.2.1f4)@0x944000->0x948fff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x7a5000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x932000
com.apple.driver.AirPortBrcm43xx(313.46.73)@0xbd2000->0xcfefff
dependency: com.apple.iokit.IO80211Family(211.1)@0xbae000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x7a5000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0xb4d000
Exception state (sv=0x1e95a000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version: 9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:51:20 PDT 2008; root:xnu-1228.5.18~1/RELEASE_PPC
System model name: PowerBook6,7
View 5 Replies
View Related
Feb 27, 2007
When I boot up this ibook it works fine for a little while then it gets all wavy and crashes. Would this be the screen, board, or the connector? Everything looks solid.
View 10 Replies
View Related
Jun 15, 2010
I have a 15" PB Aluminum 1.5ghz with 1GB of ram. Just bought off a friend and when I did a fresh erase and install of OS X 10.4, repaired permissions and rebooted I get the kernel error telling me to hold down the power button and restart. So I did this and when it restarts I get the grey apple background with a load of writing all over it. How do I try and figure out what is causing the problem. I also ran tech tool pro from the DVD and that says everything has passed such as processor, memory etc
View 7 Replies
View Related
Jul 8, 2008
My mac has worked great for the last 2 years since ive owned it and it just started to act a lil differently about 2 weeks ago. I started to notice that it started to act a lil slower than normal when i was surfing the internet. Then a couple of days ago the computer started making like a buzzing noise , kinda sounds like interference . Like when a cell phone gets close to a stereo system. Sometimes the noise will go away and then when i start opening diff app. that use computer cpu the noise happens again. It was just making the noise and i was dealing with it until the computer started to crash. It would look like the screen was on fire and everything would just freeze. Do you guys think it is the hardrive ?????? and if it was what would be my best option for fixing this. Can i save the stuff that is on my current drive ?? I have a bunch of stuff that is very important on this hardrive.
whats the best place to buy a hardrive if i need one ? and can i buy a hardrive that can hold more than the stock 74.53 toshiba MK8025GAS ?
View 5 Replies
View Related
Jan 13, 2008
I'm a film composer in the middle of a deadline, and my G5 crashes won't boot again, only get grey screen with Apple and spinning logo.Boot from Applecare disk, run tech tool, hardware fine, disk is corrupted. Catalog B-tree stuff. Cannot re-build without destroying data.Of course I have a clone of my system drive and try to boot from that, but IT is corrupted too of course!Go to Apple Store (I have ProCare), then run diagnostics and find the same. Advice? Wipe the drive and start from scratch.I do just that. I own about 35 plug-in instruments for Logic 8, so it took two days. The same thing happens. Disk won't boot.
View 3 Replies
View Related
Jul 11, 2009
I have a late 2009 Mac Mini with 8GB of OCZ 1333 RAM and an Intel X25-M 160GB SSD. Running 10.6 fully updated and installed from scratch.I have been getting out of the blue crashes while the system is most of the times idle. Can it be the RAM? It's reported fine as 8GB 1333 DDR under the system info. The Intel SSD runs latest firmware.
This is the log from the last crash which happened a little ago.
Interval Since Last Panic Report: 139426 sec
Panics Since Last Report: 1
Anonymous UUID: 01A96B0F-D497-443A-8E19-9111DF3604EE
View 4 Replies
View Related
Dec 15, 2008
Any applications that needs to wake up my Mac just won't. I have no clue what is wrong and why these won't work.
For example:
-Awaken (for alarms)
-EyeTV3 (for show recordings)
I really want to get this fixed. Now I can't rely on Awaken or EyeTV to really do anything unless I'm there waking up my Mac on time. And I don't want to leave my Mac awake 24/7.
View 3 Replies
View Related
Jun 20, 2009
Every couple of days, after my screensaver has been running for a few minutes... both of my monitors will shut off. Then no matter what I do, they won't turn back on again. The only way to get them working again is to do a forced restart.
View 1 Replies
View Related
Jul 23, 2009
I have an intel based mac pro running tiger. When it falls asleep if it's asleep for an extended period of time...say 45 minutes or longer, it won't wake up. I have to manually power it down. If it's asleep for less than 45 minutes it wakes up fine.
View 7 Replies
View Related
May 30, 2010
How can one wake an '09 mac pro through the internet, not just the local network? Previously, i had an old mac always on, and had a script to wake the mac pro when i emailed it "wake". but i don't have that other mac any longer.I understand that the new airport extreme may be able to do it? How exactly? Through the internet?
View 7 Replies
View Related
Feb 2, 2012
I have a MacPro Dual 3GHz, running OS 10.5.8 and when my Mac goes to sleep, it won't wake up. Fans speed up and light blinks, but I have to do a hard reboot.
Info:
Mac Pro, Mac OS X (10.5.8)
View 5 Replies
View Related
May 9, 2012
This just started yesterday. My wife's MacBook pro will not wake after sleep. The screen remains black though the keyboard lights up. No amount of tapping on the keys or trackpad lights up the screen. When I restart, all is well again. What do I need to do?
View 4 Replies
View Related
Jun 6, 2012
I have a macbook pro running 10.5. it will not wake up after a powerdown or sleep. I have tried the apple resets but it only comes on after pushing the start button about 50 times. I can hear the fan and the light from the push button comes on.
Info:MacBookPro, MacOS X (10.5)
View 1 Replies
View Related
Oct 25, 2007
If I'm away from my computer for awhile, it goes to sleep and won't wake up. Hitting Return or other keys won't help; nor does pushing the Start button on the back. The only solution I've found is to unplug the computer, re-plug, then start again.
Information:
G5
Mac OS X (10.4.10)
View 1 Replies
View Related
Nov 14, 2010
I really want to put some short start up sound, mp3 if possible. I mean I am opening my lock and than I hear for example a car engine sound, possible?
View 2 Replies
View Related
