Power Mac G5 :: Wake Up From Sleep Mode Causing Crashes
Oct 20, 2007
I've been fighting bad sleep crashes for over a year. Sometimes it would freeze when it started sleep, sometimes when trying to wake from a sleep. I've spent countless hours researching the problem, reading everything on the boards. I tried resetting the PMU, turning off Bluetooth, removing all USB, and all of the other suggestions. Nothing alleviated the problem. Last week I replaced the lithium battery on the mother board because it wasn't keeping the correct time. So far it is sleeping and waking perfectly for the first time in ages. No more freezes or jet engine fans. I have my fingers crossed. Power Mac G5 dual 2 GHz, purchased June, 2003
Information:
Dual G5
View 1 Replies
ADVERTISEMENT
Nov 30, 2014
My iMac wake unexpectedly from sleep mode then goes back to sleep 00:10-00:15 later. Yosemite is current.
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Oct 3, 2010
My version of InDesign CS4, will always crash after sleeping, especially when I have files open from a server volume. I've turned off the sleep hard disks when possible option in sys prefs.
Here is the interesting part of the crash log:
0 PublicLib.dylib 0x010eaf97
ProtectiveShutdown::~ProtectiveShutdown() + 279
1 DataBaseLib.dylib 0x0106deda
SUIDS::HandleLostNetConnect(IDFile const&) + 122
This never used to happen before when leaving files open from a server volume and sleeping.
View 1 Replies
View Related
Jan 13, 2008
I have never had a Mac Pro before, but I have owed 2 Imac's and a power mac and 2 MacBooks. The issue I am having is when I put the machine to sleep when I wake it back up it is like it does a restart. It does not start me back up where I was before.
View 24 Replies
View Related
Feb 24, 2012
Mac owner for 2 months now and have had no problems till today...had to reboot to wake up from sleep mode...one time occurrence or start of an issue?
Info:
iMac (21.5-inch Mid 2011)
View 3 Replies
View Related
May 5, 2012
My Mac would not turn on this morning from sleep mode. I pressed the power button and nothing. Then I did it again and heard the fan shut off inside so I tried again and up it came. Also I cannot wake my Mac up unless I press the power button. I used to press any key on the keyboard or move the mouse and it would wake up, but now that doens't work. I don't know if this could be a reason, but my mother has a horrible habit of unplugging it when it storms. It's always asleep and I've told her not to do that and to make sure it's turned off before ripping the cord from the wall. But she continues to do it when it storms.
Info:
iMac
View 1 Replies
View Related
May 28, 2012
Computer would only start after sleep mode if I unplugged the power cord. The power button would not do anything, even if I held it for a long time.
Shut down and start up would work normally. Only effected sleep mode.
After much trouble shooting I found that I had a bad USB hub. Everything on the bad USB hub would work fine so I didn't suspect it.
Info:
iMac, Windows 7
View 1 Replies
View Related
Dec 20, 2010
If I put my MBP to sleep (by closing the display) and then decide to use it right away (in a minute or less), are there any risks to the hard drive involved or any sort of issue?
View 5 Replies
View Related
Apr 20, 2012
When I close then open the lid on my MacBook, it will not wake up from sleep mode. I have to reboot by holding down the power button for 10 sec. When it restarts, it takes a long time to get past the gray screen with the apple logo. I also have this same problem when it goes into sleep mode, when left idle. I have since changed the settings so it will not go into sleep mode when idle in system preferences. I have reset PRAM and SMC, but the problem still persists.
Info:
Macbook (13-inch early 2008), Mac OS X (10.5.8)
View 9 Replies
View Related
May 13, 2012
For some unknown reason I will put my mac to sleep and at sometimes it will wake up without any command to wake up - why this happens and how to correct it?
Info:
iMac
View 6 Replies
View Related
Jan 30, 2008
My iMac is about 4 months old and about twice a month after sleeping overnight the computer will not wake up. After several attempts pressing keys on the keyboard and clicking on the mouse, I have to unplug the Mac and then press the start button on the back
View 2 Replies
View Related
Sep 11, 2008
My G4 powerbook (running Tiger) seems to be stuck in sleep mode. I turned it on and the screen remained black but the sleep button is flashing on the front.
View 1 Replies
View Related
Mar 27, 2012
I still use this old PowerMac G4 (hopefully Apple builds a new MacPro soon!) and when not using it, it is in sleep mode.Unfortunately my cats like to touch the keyboard, thus waking up my Mac.Is it possible to wake the mac only by pressing the power button?
Info:
Dual 1 GHz PowerPC G4, Mac OS X (10.5.8),
View 3 Replies
View Related
Feb 23, 2012
My iMac is set up wireless. Every time it's allowed to go in sleep mode, it loses wireless connectivity. Then, when I wake it up, I must go to System preferences, Network and request it to reconnect to my home wireless network. It always does this successfully, but it's quite annoying that it seems unable to achieve this on it's own. My iPad 2 and kindle can do this, why not my iMac?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 18, 2009
I can be in the middle of using an application, browsing a web-page, or basically any type of function when it will put itself into sleep mode. When this happens, I cannot get it to "wake up". I have to disconnect it from the power source, turn it over and remove the battery, wait a few seconds, then hit the power button, put the battery back in, then restart it. This is the only way I have found that will get it to come back to life. I don't like doing it, but I really don't see what other options I have.
View 1 Replies
View Related
Jun 19, 2014
When I need to go somewhere or just eat lunch, I put my iMac to sleep. After that, when I come back to wake it back up, it stays black.
View 3 Replies
View Related
Dec 10, 2007
I have a G5 (Power PC, g5, Dual 1.8 GHZ with 1.25 GB SDRAM, and Mac OS X 10.4.10-phew!) and I recently: added more USB ports using a PCI card, and purchased a non-Apple 22" widescreen display.
Prior to adding USB ports, I was using a hub that ran off its own power source, and used a Samsung 19" monitor.
My situation now: everything starts up fine, but ultimately the fan will kick in at SUPER HIGH and won't stop. I can put my Mac to sleep--which stops the fan noise--but then it won't wake up.
I have run the Apple Hardware test and everything checks out OK. I've also reset the SMU according to directions from this forum; AND I've vacuumed out all the dust bunnies.
The fan runs so loud and so high it sounds like it's an airplane that's about to take off.
Short of bringing in my Mac to a technician, can you recommend anything? My Mac has been glitch free up until now.
Information:
mac G5
Mac OS X (10.4.10)
Tiger
View 12 Replies
View Related
Jan 29, 2010
Sometime when I stop using my MBP for a minute or so, the screen goes black and won't wake up. I can see that the lights are on the keyboard and it's running but won't wake up. I will have to hold the power button down and then restart. Does any one know how to fix this? It's starting to do it more and more ofter.
View 1 Replies
View Related
Jul 6, 2009
I've a problem with my PowerBook G4 (12-inch DVI and Mac OS X 10.4.11). When I close the lid or when I manually try to make it sleep from the apple menu, it goes into sleep mode put only for 1 second and then shuts off (crashes). So instead of being able to wake up the computer, I have to boot it up from off.
View 3 Replies
View Related
Dec 21, 2009
I just had the original 300 GB hard drive fail in my aluminum 24" inch iMac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates. I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great.
So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I think maybe there's an issue powering the drive back on? Anyone have any ideas?
And my follow up posting later that day:
Quote:
So I ran some tests just to see if was an overheat issue, hard drive malfunction, or sleep issue. I decided to start encoding a video, pulled up Word, Power Point, Excel, started downloading all 6000 mail messages off my server (I never delete my e-mail :-/), also started installing iLife 09, and pulled up a bunch of webpages in Firefox with multiple tabs.
However, I shut off all sleep mode options on the hard drive. I let it run for an hour and came back. Everything is fine, hard drive isn't locked up and smcfancontrol shows the hard drive running pretty hot (115 degrees) but not so hot I'm worried. So it's definitely something to do the hard drives going into sleep mode and not powering back on. It's also weird that I have to leave the computer completely unplugged for 10-15 minutes before the drive is recognized again.
So turning off sleep seems to be my work-around, however, this shouldn't be a long term solution. I'm worried that there is a bigger issue with the iMac, but I'm not sure what would cause this. I've been a PC guy for years, this was my first Mac, and honestly I don't know enough about the inner workings to narrow this down. I would assume this would have to do with the motherboard in some way? But I'm not sure how you would even test it.
View 6 Replies
View Related
Mar 8, 2012
I have a new iMac OS 10.7.3Â I am using a SeaGate 1.5 TB external HD for backup.Â
If I leave the computer on continous everything works fine. It backs up every hour. It has been running fine for over a week. If I set the iMac in energy saver mode, say 10 minutes, when the iMac comes out of sleep mode there is a warning that Time Machine failed.Â
I get the following errors messages:Â "Time Machine could not complete the Backup" "Error while creating the Backup Folder"Â
There is no way to correct it or retry. I have to run disk utility and erase the external HD, re-format, then back everything again.Â
I would prefer to use the energy save feature of the iMac if I could. I tried the Apple Support number and they just said leave the iMac in "energy saver NEVER" so the iMac stays on continous. Â
Anyone able to let their IMac go in sleep mode with Time Machine turned on? It seems like a possible bug with 10.7.3?
Info:
iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 24, 2014
Recently, tried leaving my iMac in sleep mode for hours but it keeps crashing with those Crash Reports popping up when I click to wake it. They mention Kernel Panics.(Also, been getting Kernel Panics randomly popping up when I start up at the desktop. This is a 2010 iMac which I purchased refurbished not quite a year ago Already emailed seller with issues, think I might just return it as seems like hard drive is going. , as to troubleshooting before I go this route?
View 10 Replies
View Related
Oct 9, 2005
I just bought a new dual 2.0 ghz power mac G5 about 2 weeks ago. I set everything up and dowloaded all the updates for everything, and then about a week into using it the problem started. I left for work and when I got home that evening after the computer had been asleep all day, it sounded like the computer was taking off from a runway. It would not respond at all to the keyboard or mouse so I had to shut it down by holding the power button on the front of the unit and then start it back up. I called tech support but they had me turn the option off that puts the harddrive to sleep when possible and then turn off my screensaver. Well it was fine again for about a week and then it happened agin yesterday, not once but twice. I looked on apple discussion boards and there is alot of this happening. Well I took one guy's advice that seemed to know what he was talking about. I restarted holding the command-option-o-f keys down, then prompted the computer to reset the v-ram, and two other things he suggested to reset that I cannot remember. Then I restarted, trashed the energy saver prefs and ran a repair disk permissions task inside OSX. Well that is where I am now, and it has not done it again, but I am still trying to find out what exactly is going on here. I just spent $2000 on a machine and it appears messed up and Mac has no answer.
View 5 Replies
View Related
Nov 23, 2007
My old G5 dual 1.6 will not go into sleep mode. I had upgraded to 10.5 but several of my photography programs would not run so I reverted back to 10.4 by reinstalling the operating system and not wiping the drive clean. I now must shut down everytime or the G5 will get to the point that all of the cooling fans are running full speed and it will not go into sleep mode automatically. Any suggestions other than a clean install?
Information:
G5 dual 1.6
Mac OS X (10.4.11)
View 3 Replies
View Related
Jul 1, 2012
Is it best to turn off my 27" i7 processor iMac or put it into sleep mode when it's not in use? ie sleep or leave the house. Also the fan has just turned on, never heard it before. I am watching a video whilst converting another into mp4 format. Is that why?Â
Info:
iMac, Mac OS X (10.7.4)
View 7 Replies
View Related
Nov 9, 2007
after having installed Leopard, my Mac doesn't go to sleep anymore. When I activate the sleep mode, it begins to "shut down" and the fans begin to blow. Normally, shortly afterwards it would sleep, but now the fans blow and blow and blow and nothing more happens. Using the mouse wakes the Mac again.
View 7 Replies
View Related
Dec 9, 2007
When my computer is about to go into sleep mode or when it is being activated from being inside sleep mode or any time my computer goals idle for 10 minutes or so something inside my computer clicks. So far there has been no problems is this a normal sound to here?
Information:
G5
Mac OS X (10.4.1)
View 5 Replies
View Related
Jul 22, 2009
First, sorry for the longer post - I have to explain everything. I just bought a 24-inch iMac, Mac OS X 10.5.7, 2.66 GHz Intel Core 2 Duo, 4GB, 1067 MHz DDR3. I also just bought an uninterruptible power supply (UPS) from CyberPower. Everything's great, but I still have this one question which is bugging me. What happens when my iMac is in sleep mode and the power goes out? I have set the settings so that my iMac shuts down after 10 minutes of "battery" (UPS) usage, but I am not sure if it will do that when in sleep mode? The UPS is connected to my iMac via USB cable so that they communicate to each other in the case of the power outage, etc. This is what somebody wrote elsewhere on this topic: "Using the Deep Sleep widget, I've worked around this issue: I changed the default sleep behavior to Safe Sleep (hibernation+sleep).When I'm on the grid, my computer will now safe sleep after 3 hours of non-use. If I go off the grid and onto UPS while the MP is awake, the Energy Saver preferences will safe sleep after 1 minute. If for some reason this doesn't occur, Energy Saver will invoke a shut down after 5 minutes. If I go off the grid and onto UPS while the MP is safe sleeping, no big deal since contents are written to the HDD and RAM with this configuration."
I've downloaded the Deep Sleep widget and am using it now. Obviously, the user up there is using a MacPro, and not an iMac, but it should work the same. So, I am not concerned about losing data, and blah, blah, blah... what I am most concerned about is my iMac not working properly because it wasn't shut down properly. I know that there is a very low risk of this happening, but I've spent big bucks on this iMac and I want to make sure that it is shut down properly 100% of the time, if I can help it. If my iMac loses power when in deep sleep, will it be ok? Obviously, I am still using the UPS in deep sleep, but that UPS (battery) power will not last long and will shut down. I am going to turn my iMac off when I don't plan on using it for several days, but if I'm just out and about and the power goes out and my iMac is in deep sleep, will it be ok with the power going off? I contacted CyberPower and this is what they had to say after a long back-and-forth. "You will want to use the deepsleep tool. I had the belief that sleep was the same as windows hibernation where everything is saved to disk. Since deepsleep will save to the hard disk, you would not lose anything when the power is lost when the battery runs out." Despite all of this, I wanted to hear what everyone else thinks about this, especially those of you who might have experience with this kind of stuff. What do the rest of you do when it comes to UPS, etc.?
View 4 Replies
View Related
Aug 7, 2008
is there a way to setup my MBP's Power Button to make the laptop directly and without opening additional windows enter sleep mode?Closing the lid to enter sleep mode is no solution
View 4 Replies
View Related
Aug 23, 2009
I'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
View 5 Replies
View Related
