PowerPC :: Crashes When Burning A CD?
Sep 2, 2010
O/S 10.4.11 Itunes 9.2.1 (5) Quick time 7.6.9
I need a quick solution: Need to burn music for my upcoming wedding.
CD/DVD burner works outside of Itunes.
When trying to burn a CD in Itunes it crashes and asks if you would like to restart it.
Not the factory CD: But as stated above does work outside of Itunes.
Music is not locked either
Any Ideas anyone.
P.S Please note I have been told? This could be an issue with Itunes 9.2.1 not liking O/S 10.4.1 can anyone confirm.
Also I am thinking about getting a power G5 Desktop would I have this problem running O/S 10.4 and Itunes 9.2.1
View 2 Replies
ADVERTISEMENT
Jan 24, 2008
Thats basically the problem in a nut shell. I can't seem to burn a DVD+R DL, everytime I attempt to do this the system crashes completely and I get the transparent window telling me to restart the system. To me, this feels a lot like the blue screen of death.
Anyone else having a similar problem? Have there been similar problems reported? Its definitely not the discs either, I've tried using Philips and Memorex DVD+R DLs and neither work, however, burning this stuff on Tiger was fine, however I'm not sure if Leopard is to blame because i dont remember if I had burned any DVD+R DLs successfully using Leopard.
I've got a first gen. Mac Pro with a PIONEER DVD-RW DVR-111D.
View 7 Replies
View Related
Jul 5, 2012
Trying to burn a DVD on my ageing Late 2008 MacBook Pro nearly always results in the Finder crashing and restarting at 99%. Afterwards, the CD can't be mounted or ejected except by force-restarting and holding down the trackpad.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 3 Replies
View Related
Sep 11, 2014
Sometimes when burning homemade films on to dvd it fails / crashes ...
Info:
iMac, iOS 7.0.1
View 1 Replies
View Related
Nov 5, 2006
What I used to love about my Powerbook G4 is that it's pretty much silent, unless I happen to be burning something, or running several programs at once. However, this appears to be a thing of the past, as I've begun to notice that the fan is now permanently whizzing, and while it's not loud, it's anything but silent. This happens constantly, while I'm running minimal programs, and while my computer is sitting on my desk, not on any soft surfaces.
View 3 Replies
View Related
May 19, 2009
Is it possible to burn a DVD onto a double layer blank DVD+R using thefollowing:
I have a Powerbook 10.3.9 aluminium, with a Matshita DVD-R UJ-816.
Will this burn a double layer or do I need some additional software. Ipresently use Toast 6.0 for normal.
View 6 Replies
View Related
Jun 21, 2010
1. can i have a good software for burning avi. or mp4.
2. will leopard work on g4
View 1 Replies
View Related
Jan 15, 2010
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
View 2 Replies
View Related
Nov 21, 2010
So I'm new in this forum and I've got a HUGE problem with Youtube and my iBook G4 that started recently.
Whenever I enter to Youtube and start loading any video, the system crashes, not only Safari but any application that is open at the time.
I've uninstalled and installed Flash Player, updated the system and Safari as well as tried using another browser (Firefox) with no results.
When I disable Javascript from Safari the system does not crash and another thing I noticed is that I can watch embedded videos on other pages but not directly on Youtube.
View 11 Replies
View Related
Jun 20, 2008
My iBook g4 has started to producing a grayed out screen and a message saying I need to hold down the power button to restart. I have all my documents backed up so the first thing I did was a clean install of Leopard. That has not stopped the problem. I have copied the info from the log the computer would like to send to Apple. Can anyone tell me what it means?
Fri Jun 20 11:54:02 2008
panic(cpu 0 caller 0x000AED04): "Uncorrectable machine check: pc = 0000000000BE2918, msr = 0000000000149030, dsisr = 42000000, dar = 000000001F3B8000
" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
" " L2FIR = 0000000000000000, BusFir = 0000000000000000
"@/SourceCache/xnu/xnu-1228.5.18/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace: 0x0009B498 0x0009BE3C 0x00029DD8 0x000AED04 0x000AEF84 0x000B2A78
Proceeding back via exception chain: Exception state (sv=0x2a4a9a00)
PC=0x00BE2918; MSR=0x00149030; DAR=0x1F3B8000; DSISR=0x42000000; LR=0x00BE2A00; R1=0x1E93FBA0; XCP=0x00000008 (0x200 - Machine check)
Backtrace: 0x00946170 0x00C3B5E0 0x00C3BF4C 0x00BDBEC4 0x00357748 0x003569AC 0x00356A60 0x000B05D4
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleKauaiATA(1.2.1f4)@0x944000->0x948fff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x7a5000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x932000
com.apple.driver.AirPortBrcm43xx(313.46.73)@0xbd2000->0xcfefff
dependency: com.apple.iokit.IO80211Family(211.1)@0xbae000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x7a5000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0xb4d000
Exception state (sv=0x1e95a000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version: 9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:51:20 PDT 2008; root:xnu-1228.5.18~1/RELEASE_PPC
System model name: PowerBook6,7
View 5 Replies
View Related
Jul 13, 2008
I am running os 10.4.11 on a g4 dual 1 ghz powerpc g4 with 1mb l3 cache and 512 mb ram. Ever morning when I try to wake the computer up it crashed. I get a screen full of black bars with white text. Such stuff as "corrupt skip list code= 00000007 and exception state (sv=0x1ceb500)
I have booted from system cd and ran utilities. I have ran onyx. I have reinsalled the system from the cd and re-updated the system still with the same results.
View 7 Replies
View Related
Feb 27, 2007
When I boot up this ibook it works fine for a little while then it gets all wavy and crashes. Would this be the screen, board, or the connector? Everything looks solid.
View 10 Replies
View Related
Jun 15, 2010
I have a 15" PB Aluminum 1.5ghz with 1GB of ram. Just bought off a friend and when I did a fresh erase and install of OS X 10.4, repaired permissions and rebooted I get the kernel error telling me to hold down the power button and restart. So I did this and when it restarts I get the grey apple background with a load of writing all over it. How do I try and figure out what is causing the problem. I also ran tech tool pro from the DVD and that says everything has passed such as processor, memory etc
View 7 Replies
View Related
Jul 8, 2008
My mac has worked great for the last 2 years since ive owned it and it just started to act a lil differently about 2 weeks ago. I started to notice that it started to act a lil slower than normal when i was surfing the internet. Then a couple of days ago the computer started making like a buzzing noise , kinda sounds like interference . Like when a cell phone gets close to a stereo system. Sometimes the noise will go away and then when i start opening diff app. that use computer cpu the noise happens again. It was just making the noise and i was dealing with it until the computer started to crash. It would look like the screen was on fire and everything would just freeze. Do you guys think it is the hardrive ?????? and if it was what would be my best option for fixing this. Can i save the stuff that is on my current drive ?? I have a bunch of stuff that is very important on this hardrive.
whats the best place to buy a hardrive if i need one ? and can i buy a hardrive that can hold more than the stock 74.53 toshiba MK8025GAS ?
View 5 Replies
View Related
Jan 13, 2008
I'm a film composer in the middle of a deadline, and my G5 crashes won't boot again, only get grey screen with Apple and spinning logo.Boot from Applecare disk, run tech tool, hardware fine, disk is corrupted. Catalog B-tree stuff. Cannot re-build without destroying data.Of course I have a clone of my system drive and try to boot from that, but IT is corrupted too of course!Go to Apple Store (I have ProCare), then run diagnostics and find the same. Advice? Wipe the drive and start from scratch.I do just that. I own about 35 plug-in instruments for Logic 8, so it took two days. The same thing happens. Disk won't boot.
View 3 Replies
View Related
Jul 11, 2009
I have a late 2009 Mac Mini with 8GB of OCZ 1333 RAM and an Intel X25-M 160GB SSD. Running 10.6 fully updated and installed from scratch.I have been getting out of the blue crashes while the system is most of the times idle. Can it be the RAM? It's reported fine as 8GB 1333 DDR under the system info. The Intel SSD runs latest firmware.
This is the log from the last crash which happened a little ago.
Interval Since Last Panic Report: 139426 sec
Panics Since Last Report: 1
Anonymous UUID: 01A96B0F-D497-443A-8E19-9111DF3604EE
View 4 Replies
View Related
Oct 12, 2009
I got my LG blu ray burner today, installed it fine and my Mac does recognize it. So I went to FCP and under the File>Share there is the option to burn Blu Ray discs. So I picked my blu ray burner as the drive and about an hour later it asks me to insert the media. So I insert a Blu ray but then it ejects it back out.
I did this about 4 times and then threw in a DVD to see what would happen. To my surprise it looked like it started to do something and the percentage complete went up a little, then it ejects the DVD out and asks for me to put in a dual layered media. I mean the file is no bigger than 2 gigs so my single layer BD-R should be fine. I have heard lots of people talking about Toast 10 to author blu ray's, but the point is why should I spend the money if FCP and compressor should be able to get the job done?
View 11 Replies
View Related
Nov 14, 2009
First, let me apologize if this question has been asked a zillion times before. I have searched but failed to find anything that would help me.
I like to build CD's from ITunes. After I burn the CD, I listen to it on my computer...no problem.
However, when I insert the CD in another player to listen...NOTHING!!!!
In the past I have done this and had no problems listening on another device...but all of a sudden I am unable to do. To be honest with you, I don't know anything about MP3 or other code names that everyone talks about.
View 5 Replies
View Related
Aug 29, 2010
How do I burn a .dmg file, as well as a .txt file so that it goes on to one disk.
I have tried Toast Titanium, but not sure what I'm doing.
View 2 Replies
View Related
Dec 4, 2010
I friend made home DVD for us but must have burnt it wrong as it just opens up the TS folders.
I thought that I could copy the files and then burn the DVD again correctly so that it plays right on a DVD player.
View 7 Replies
View Related
Jan 10, 2011
Is there any free or inexpensive software for Mac that'll take a movie and burn it onto a DVD in the right format?
I read Burn works good, but when I burned the movies to DVD they didn't play in my DVD player.[We use playstation 2 as a DVD player and it usually plays alot of DVD's I've burned]
View 14 Replies
View Related
Jul 22, 2006
I'm quite new to Mac, and although everything is pretty clear, I haven't yet figured out how to burn a DVD. Everytime I try, it'll give an error 0x8002006E and stop burning.
- Reading is and has always been fine.
- I'm using Philips DVD-R discs.
- I'm on a white 2Ghz MacBook It's supposed to be able to burn DVD-R, right?
I have tried to do it from the finder, and creating a disc image, and burning it from the disk utility.
View 7 Replies
View Related
Mar 22, 2009
I have converted two .avi files on my MBP to the .iso file. Then I open up the two files and they become the Audio_TS and Video_TS folders. However, when I try and drag those to Toast, and try to burn the files, Toast always gives me an error. My question, how do correctly convert .avi files to dvd format so I can burn to a blank DVD? I want more than one .avi file converted to dvd format on each DVD.
View 10 Replies
View Related
Jul 27, 2009
Does a new user like myself benefit from Roxio Toast? Or does the software that comes with Mac OS X capable of performing some simple CD-R, CD-RW, DVD-R and DVR-RW burning fuctions. I want to organize some old digital images and want to get them off old CD's onto newer (better quality) DVD's and I may temporarily use some DVD-RW's and do my final burn on DVD's.
View 9 Replies
View Related
Jan 5, 2009
I know how to download from the internet to my computer.
How do I copy these files onto a disc?
View 3 Replies
View Related
Dec 1, 2009
Another reason im afraid of switching to mac is i dont know what software there is out there for burning dvd's.. its so easy on windows... mac i have no idea... i currently use the following software to burn dvds on windows
DVD Fab 6 to make the copy
DVD Shrink to shrink it so it will fit on a blank dvd
IMG Burn to burn the DVD...
What do you do on MAC for this process?
View 7 Replies
View Related
Aug 1, 2008
so this is the second time it happened and as I do a lot of computer animation, it's starting to get annoying. I accedentally left my ACD on (30") today when i left at 8. when i got home at 5, and opened my computer animation app (blender, which starts out effectevly completely grey). I noticed a vauge impression of the screen i had left the acd on today. This DID happen before, and it goes away after a day or two. Still, it is annoying. My questions: A) is this bad B) what should I do?
View 10 Replies
View Related
Sep 22, 2010
i am new to macs, i have a macbook pro and i am looking for a cd/dvd burning software that can burn audio/mp3 cds, data dvds etc.
i used Nero in windows. what is the best program out there for macs?
Also is there any free program that will do a decent job?.
View 3 Replies
View Related
Oct 28, 2010
I have created a DVD slideshow in iDVD but when I burn it to disc the quality of the images is unacceptable. I have tried different solutions from forums but the results with each thing I try don't resolve the problem.
I have created it in iMovie, Share as a quicktime movie onto my desktop, then moved this into iDVD but the results are still poor. I have also tried burning it through Roxio Toast, and a couple of other disc burning programmes. I have tried it with the images as jpeg's and tiff's on different resolutions, and I have made sure the ken burns effect is off.
View 1 Replies
View Related
Jan 10, 2011
Basically, I stick in a CD and it just stays there. Usually the computer does the rest, takes it in, you hear a whirring sound and stuff happens. I did it recently and nothing goes on - I have to take the CD out by essentially taking it by the edge that still sticks out.
I then went into the Apple Icon > About This Mac > More Info... > Disc Burning and found that no burning device indicated to be in existence. Clearly I should be able to have something there, right? Any drivers to download? Or should I just do a complete reboot of the system and go from there?
View 6 Replies
View Related
