OK, I am a newbie, as the name implies. I purchased a MacBook Pro with supposedly Leopard? Mac Os X (somewhere on the machine it said Tiger - does it matter?), with Parallels installed by the friendlies at MacMall. I start Windows and cannot connect to the Verizon wireless express card which is working just fine. The Parallel's User Manual is a joke... how do I make this thing work?
View 6 Replies
I have a blackbook (intel core 2 duo) and I can connect to my landlord's wireless network (they have a netgear wgt624) but I can't actually use the web (Safari or Firefox will just "think"). I've tested the diagnostics and it confirms that my mac can connect to the network, but it cannot connect to the internet. The network uses WPA personal and it has a 19-aphanumeric passphrase.
*Also - would it be possible for me to extend the wireless range (and make it possible to browse the web) if I used my own 2wire wireless modem to connect to the netgear wgt624?
an older retired couple, recently got cable modem access specifically so I could have it. They are the coolest, nicest people on earth. I'd like to get them on my wireless network as a
View 1 Replies View RelatedI cant connect to internet through my DSL modem
Info:
MacBook Pro
I have a new MacBook Pro 13 with OSX Snow Leopard and an Optus wireless USB modem. I have to manually connect to the internet. How can I set it up so that I automatically connect to the net when I launch Safari or Mail?
View 1 Replies View RelatedWhat can I buy to strengthen my signal without modem? I have a lot of problems connecting to the internet while in some of my classes.
View 3 Replies View RelatedI have a Power Mac G4 MDD that I am trying to connect to the Internet using a USB Cable Modem from Broadstripe Cable in Maryland.
So far I have tried a straight connection using the supplied USB cable, then via an Ethernet adapter from the USB cable to the MDD. Went through the software setup several times and still have had no success. does anyone have a solution for this type of problem?
My father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
How can I connect my macbook pro with a windows base laptops using a motorola wireless modem in my home?
I have a MacBook Pro and my son and my wife have a Windows Laptop. We have a Motorola wireless Modem that is modem and wireless router at the same time. See below
All of the computers are able to surf in the internet, but My MacBook Pro does not be abel to communicate with them. Motorola - SURFboard eXtreme DOCSIS 3.0 Wireless-N Cable Modem and Gigabit Router
Because I believe that at the same time, It will allow me to use my QB for Mac using the QB for windows
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.6)
I am running MAC OS X version 10.5.6, on an Intel Core 2 Duo iMac.Last week I installed Parallels 3 (and updated online to build 5608), and Windows XP SP3 Everything was working fine, however, over the last few days the network connection on Parallels has stopped working. It is still working fine on OS X.The message I get under network conections is:Local area connection......limited or no connectivity....Parallels network adapter.I tried to repair the connection, but the IP address could not be renewed.
View 1 Replies View RelatedBeen searching and can't find the answer here. I setup Bootcamp last week and had internet connection and everything working fine. I've setup Parallels now as well and I am connecting to the Bootcamp partition with this via OS X.
So, everything is working well, I can view my local websites on Leopard via Parallels, the only thing that has stopped working is my wireless internet connection in windows.
My only guess is the Bootcamp is now connecting to everything via my OS X connections, but not sure. Does anyone know how to set the wireless internet up again?
I am having problems connecting to the internet using Internet Explorer in Parallels. I can connect to the internet with no problem using Fire Fox in Parallels but I get a message that IE cannot connect to the internet when I try using IE. I specifically need IE as the website that I am working with says only IE can be used and not Firefox, Safari, etc. That is the only reason I am using Parallels instead of Mac side. Site specifically states it needs IE 6 or higher so I can't use the Mac side. Any ideas why Firefox will connect and not Internet Explorer?
View 2 Replies View RelatedI have installed Win XP on my Parallels 5.0.9310 (Mac OS 10.6.2) but am not able to get Windows to connect to Internet. I have tried updated the Devices settings in Parallels as per the instructions in their manual.
Anyone else had this problem? Any suggestions on how to get this to work??
I installed parallels in my macbook and I have the game Red Alert 3 installed in windows in the parallels. I can see that i'm connected to the network in windows and the mac and i can access the internet in both. We have 3 computers in the network, two are PC's and one is the macbook. When the PC creates a game in the same network, the other PC can see the game and join it. But the mac, which is connected to the same network, can't see the game and cannot join. How can I fix this network problem?
View 1 Replies View RelatedI'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies View RelatedI recently got wireless internet. Before, the Mini worked fine connected by cable. It has never been connected to a wireless before. The wireless router works correctly, my $250 PC connected to it instantly. There is a yellow light on Airport and it automatically populates an IP address, whatever that means. I haven't installed any new software since it worked with a cable, no funky setup or third party anything- it's just a mac mini plugged into a TV I watch Netflix on and that's all.
My ISP said it's a problem with the computer, the Mac free support could not fix it. I really don't want to pay for an extended warranty or phone support on something basic that this computer should just automatically do. I haven't tried typing in a manual IP address- I don't know what that address would be. If all else fails, I will just run a cable to it again.
I have a MacBook Pro that I have had from about 3 years now. It's been great but earlier this week, it wasn't able to connect to the internet here at my school (college). I didn't think too much of it because my schools internet is always spotty and goes down from time to time. Yet when I go on to my computer tonight nothing I do with my airport or computer will get my webpages to say anything other than "Server not found". I tried turning off my airport then back on and reselecting my network because usually that helps. It would say it connected and I would have full bars but still the same error message. I tried again, and when I did it this time, I did it from within the system/network preferences. When I did this, I watched the connection of my airport go red, then I would connect and it would go to yellow saying I had no IP address.
I would then sit and wait and eventually it would fully connect giving me the green go-a-head. But, again when I would open up my internet, I would get the "Sever not found" message. I would then quit my firefox all together and tried again that way and still same massage. I restarted my computer and tried again...nothing. I became more concerned because my roommate could get on the internet just fine and I could use the wireless in my room through my phone. I was consered that now this was a matter with my computer and not just the internet, so to make sure I got out my ethernet cable and hooked it up with my connection in my room.
Info:MacBookPro, Mac OS X (10.5.8)
I was happy to get my mac pro yesterday, but upon setting it up, I couldn't get it to connect to my network. When I clicked I the airport logo and the top right, it said airport was on and I was connected to the network. However, when I opened up Safari I got nothing...just a screen that said something like "you are not connected to the internet." The last time I had a macbook, I turned it on and bam, I was connected to the internet right out of the box.
After trying to fix it for 30 minutes, I decided to reset my modem/router. After doing this, the macbook connected to the internet for a few hours and I went to bed. Now I come home today and it works for about 30 minutes and then stops working. Keep in mind, my PC is working flawlessly so I know my network is up and running. After about 30 minutes, it connects again...and then stops working again. Very frustrating. As I type this message, it still wont connect to the internet even though the computer says I'm connected to the network.
Another thing that makes me think there is a hardware problem is that the macbook wont connect to my wireless printer. I've installed the software 2x and right after going through the install procedure, it will print for about one minute and then it does nothing - I get a message that says something like "your printer is not on or not connected to the network." So then I went through the steps of connecting it again and again. Every time it would ask for the password to the network so I put it in and it says I'm connected....but nothing will print. After the 3rd time, I was finally able to make it to spit something out wirelessly from my macbook...but 5 minutes later it's back to saying my printer is not on or connected to the network. This is weird because initially it works and then it stops. During this whole procedure, my PC recognizes it just fine and prints within 5 seconds. For some reason the mac just wont do it.
I thought macs were supposed to just work, but this laptop has been more frustrating than any PC I've owned. Here I am with a new macbook that can't connect to the internet OR my printer. Granted, I know very little about computers so maybe I'm overlooking something simple.
If it's a hardware problem, do you think Apple will refund my money?
I have been a mac user since 2006. Yesterday, I purchased an iBook G4 for my father, who I have converted from Windows to Macintosh. We are 99% satisfied. Everything works great except the wireless internet. Whenever the computer shuts off or goes to sleep, we have a difficult time re-connecting to the wireless internet. After five minutes of clicking on the wireless signal (at the top of the screen) and turning it on and off, we are able to get on. Once we connect, it does not seem to disconnect.
View 7 Replies View RelatedI can't connect to wireless home network.
View 1 Replies View RelatedHave 2011 13" MacBook Air. I erased my hard drive using cmd-r at startup to enter disk utility. When I restarted, Internet Recovery automatically started to try and connect to my wireless. It never asked for a password. It never connected. Error "-2002F". Tried it again, this time selecting a new network, entering my network name and password. Still will not connect. Have repeated many times. Looked at my access logs on router, it is not connecting.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
So here is the issue.. when i first got my macbook, it connected to the wireless internet at my house perfectly and stayed connected. (I had an open wifi account) Then, we got a new router and we wanted to put a password on it so that no one could use our wireless connection without us knowing.
Now my macbook will not connect to the wifi.. It just keeps telling me that the password is invalid. I have a TRENDnet router (TWE-632BRP) but my iphone connects to the wifi fine using the password.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have the newer, rounded model Verizon FIOS router.
There is a USB port on the back and I was wondering if I could use that to somehow connect my WD HD to it so that I can use it wirelessly for Time Machine back-up.
I would buy a Time Capsule or Airport Extreme, but the Verizon router is the central hub for my Internet, cable, and phone. And of course I'd save about $200 if I can do this too.
I'm sure this has been posted, but my search pulled up hundreds of threads. After I scanned the first 50, I decided to just post my question.
I have to wait a few days (at most) for my job to register my MAC address so that the new Mac Pro has access to the network/internet via ethernet. It does not have an Airport card or Bluetooth. While I am waiting, is there a way to connect the Mac Pro to my Powerbook (which has Wifi internet access) such that it can piggyback on the internet connection as a temporary solution?
I've just purchased a Power Mac G4 desktop type of computer from a friend of mine. I've asked around and I was told it wasn't able to connect to a wireless internet connection inside of my house.
View 3 Replies View RelatedMy wi fi iPad works fine on wireless home network but the Mac will not connect to internet even through airport diagnostics shows connectivity ok, how can I resolve?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1.1
I received an at&t quicksilver 3g usb modem today. Works great on my MBP, however I can't seem to get XP to see the internet connection through Parallels. I have enabled internet sharing in the prefs pane. I shared the 3g modem to the ethernet connection. I tried installing the at&t connection manager software in virtual xp, but it wouldn't connect for some reason, so I removed the software.
View 3 Replies View RelatedI have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
I have a wireless network set up at my home. I have two laptops that were both working fine on the network at one point. Laptop A still works fine, thus the network is working. Laptop B cannot connect to the internet via this network but the airport connection on that machine is completely full.
In my system preferences > Network Panel I am able to see the green light suggesting that I am connect to the network and that I am also connect to the internet via this airport.
It is also worth noting that the same machine works fine connecting to the internet at my office via the airport there as well as other airport networks.
I am at a loss because the fact that laptop A works on the network rules out the network as the issue and the fact that laptop B works on other wireless network suggests that the settings are correct. Both machines are running the same OS 10.6 ( latest updates)
I currently have an old technology 2-Wire modem and I hear its not the "friendliest" with Macs. Especially when configured in wireless mode. Thus, I'm thinking of replacing our old 2-Wire with new technology Linksys WAG160N modem/router (for my current 10 Megs DSL service).
[URL]
If you have this Linksys modem/Wireless Router, any good, bad & ugly on it?
