I have a Power Mac G4 MDD that I am trying to connect to the Internet using a USB Cable Modem from Broadstripe Cable in Maryland.
So far I have tried a straight connection using the supplied USB cable, then via an Ethernet adapter from the USB cable to the MDD. Went through the software setup several times and still have had no success. does anyone have a solution for this type of problem?
My father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
I have a blackbook (intel core 2 duo) and I can connect to my landlord's wireless network (they have a netgear wgt624) but I can't actually use the web (Safari or Firefox will just "think"). I've tested the diagnostics and it confirms that my mac can connect to the network, but it cannot connect to the internet. The network uses WPA personal and it has a 19-aphanumeric passphrase.
*Also - would it be possible for me to extend the wireless range (and make it possible to browse the web) if I used my own 2wire wireless modem to connect to the netgear wgt624?
I cant connect to internet through my DSL modem
Info:
MacBook Pro
OK, I am a newbie, as the name implies. I purchased a MacBook Pro with supposedly Leopard? Mac Os X (somewhere on the machine it said Tiger - does it matter?), with Parallels installed by the friendlies at MacMall. I start Windows and cannot connect to the Verizon wireless express card which is working just fine. The Parallel's User Manual is a joke... how do I make this thing work?
View 6 Replies View RelatedI was wondering how to connect to the internet with no cable plugged into it. I am running leopard and I don't know what to do.
View 6 Replies View Relatedan older retired couple, recently got cable modem access specifically so I could have it. They are the coolest, nicest people on earth. I'd like to get them on my wireless network as a
View 1 Replies View RelatedI have multiple problems: a. When I connect a cable to the internet, i am unable to directly login to the internet. I need to go the ISP site, login and then it connects me. I have tried to create some network connections which are not letting me connect directly without requiring a password. PLease note that I have provided the login id and password in the network preferences and created it but unable to login in.
b. Please also let me know how to delete all prior network settings.
I am new to apple and hence only capable of system menu driven capabilities.
More queries later as i set up my wireless.
What can I buy to strengthen my signal without modem? I have a lot of problems connecting to the internet while in some of my classes.
View 3 Replies View RelatedI'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
Quick question - I have a cable line running from my wall to my cable modem, which in turn connects via ethernet cable to an AEBS. The AEBS provides wireless connectivity to four Macs.
Can I split the cable line in my room so that I may watch TV, or would this cut my download/upload bandwidth in half?
i can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
I have an aiport extreme card in my emac. It was installed around a year and a half ago and has workd fine until yesterday. it suddenly says that it is not configured. It also says the antenna cable is unplugged and that it is turned off. I tried to trouble shoot it with internet connection assistant which says cable is unplugged and aiport is off. I have taken the card out and reinstalled it and reattached the cable mutiple times to no avail. And yes, I know how hard it is to push in.
Info:
eMac (ATI Graphics), Mac OS X (10.5.8), 1 GHz powerPC G4
i want to buy a cable on ebay that will connect out of my port on my powerbook g4, i think its a dvi outpout. and i want to plug it into a hdmi input on my projector.
there are different kinds, supposedly, of dvi cables.
DVI -D
DVI -M
[URL]
can anyone tell me what kind of cable i need to get to do this?
I just got a new MacBook Pro, but my wife uses my old 1.25GHz Alum. PowerBook. My MB pro flies, but unfortunately, the wireless ethernet on my old PB is slow as hell. I've got 11+GB of free space left on my hard drive and Safari or Firefox are the only applications I have open. I also have a cable internet connection with wireless through my 1st Gen Airport Express, yet it's still slow.
View 4 Replies View RelatedRandomly my nice old G4 PowerMac, running 10.4 stopped connecting to the internet. Checking the Ethernet settings, it isn't seeing any information.
My cable modem and router are both fine. The router is wireless, and computers receiving the wireless signal work fine. I hooked the modem up directly to the Mac, and it still wouldn't see it.
Today I happened to come across an old blue and white Power Mac G3 at a local thrift store, and I'm wondering how to connect it to the Internet. It has what looks like an Ethernet port on the back, but the cable won't fit. What do I need to connect it?
View 2 Replies View RelatedI have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
View 2 Replies View RelatedI recently purchased a SBG900 Motorola cable modem/router to use with my IMAC. For a beginner, I found the setup instructions woefully lacking. I have managed to set up an "unsecure" wireless connection with the 900. It works fine for websurfing. I cannot however send email. When I do, I get a pop up box saying that my email connection to the Apple server on port 25 has timed out. I am able to receive email just fine. I wanted to sort this problem out before attempting to "secure" the network. I'm guessing its somewhere in the Motorola setup but I'm not sure where to start.
View 5 Replies View RelatedI've scanned Google for my problem but when I tried setting an IP address, I got no connection, I don't know if it because I dont have a LAN or what... I need to set a static IP address so I can port map on my airport to open port 6112 for hosting wc3 games. I have a motorola surfboard cable modem and an airport extreme base station. I connect using DHCP via ethernet. Any feedback would be wonderful!
View 7 Replies View RelatedI've got an issue with my TC setup, I cannot for the life of me get it to see the cable modem and setup the WAN access. If you will pardon me I will cut n paste the lengthy description I left on the apple support list as I feel it is pretty thorough. I think I know my way around networks and dhcp but this setup doesn't yield any logs so I can't troubleshoot! I'm on Virgin Media 20megs and I can't connect using my brand new TC.
Modem: Ambit 256
Time capsule : 1 tB, firmware 7.5
Test router : Netgear WGR614V9
MBP alubook 15 inch late 2008
I tried connecting with the test router and the MBP alubook to the modem and both can pickup the ethernet connection and get a DHCP lease after some coaxing (cold-start the modem first, then cold-start the router/mbp). But I'm having no luck with the airport extreme base station. Hard reset / factory reset / soft reset, any startup order, nothing works. I even left the devices offline for an hour before doing another round of testing. I tried several cables (including a crossover cable) and all configurations work apart from the ones involving the time capsule. Both the modem AND the TC ethernet ports light-up with a green light... but somehow the TC doesn't negociate its DHCP or even basic ethernet connectivity. I see there's a firmware 7.4.2 on the support site for the TC but I'd rather not downgrade the unit.
Here are the console logs from the MBP when it connects to the modem (yes, my MBP is named awesome, because frankly it is):
Originally Posted by System.log when connecting MBP to Modem
29/12/2009 08:54:04 Awesome kernel Ethernet nvenet: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug 796d,0000,0de1,0005,45e1,0000
Originally Posted by Modem status page
Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant
MAC Address : <<redacted to protect the innocents>>
Serial Number : 0014A49B00A5
Boot Code Version : 1.1.2c
Software Version : 2.111.1002
Hardware Version : 1.9
I recently bought an Ibook on Ebay and im wondering how to connect it to my wireless router!
PS the Ibook is the clamshell design one
I'm a college student and I live on campus during the school year. When I'm at home, I can connect to the internet just fine. Anywhere I go, I don't have a problem. But starting this year, I cannot connect to the Internet on campus. I live in the on-campus apartments and I cannot connect to the residential network there using ethernet. We have a wireless router in our apartment and that won't work for me either. At best, I can sign into the residential network using my school account and I can get on one or two websites before "Safari cannot find server".
View 4 Replies View Related who tested the line and connection. I am getting 6meg.. they then told me to
network utilities->netsat->display state of all current socket connections
apparently there shouldnt more than 10.. but theres loads..
I have been using my ibook g4 to connect my xbox 360 to the internet. I have an ethernet cord connecting the two together. just recently, after doing this for months, my ibook will randomly disconnect from the internet. the computer's wifi signals say it's connected but nothing works including ichat, and safari. the internet on xbox also stops. i try resetting my computer and unplugging the ethernet, and the only thing that works is resetting our router.
View 5 Replies View RelatedI currently have a wireless network set-up through Comcast. I have a Netgear modem/router from Comcast. I just purchased Time Capsule and I would prefer to use TC as my wireless network router instead of the Netgear modem/router. Do I need to have Comcast supply a new modem without the router or is there a way to connect TC and the Netgear modem without using the built-in router?
View 2 Replies View RelatedI'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
I have been a mac user since 2006. Yesterday, I purchased an iBook G4 for my father, who I have converted from Windows to Macintosh. We are 99% satisfied. Everything works great except the wireless internet. Whenever the computer shuts off or goes to sleep, we have a difficult time re-connecting to the wireless internet. After five minutes of clicking on the wireless signal (at the top of the screen) and turning it on and off, we are able to get on. Once we connect, it does not seem to disconnect.
View 7 Replies View RelatedI have a cable modem from Motorola for my internet connection.
I'm planning to buy Airport Express so I can have a wireless connection for my MBP and iPod Touch.
Is it OK to connect Airport Express to my motorola modem ?
I've just purchased a Power Mac G4 desktop type of computer from a friend of mine. I've asked around and I was told it wasn't able to connect to a wireless internet connection inside of my house.
View 3 Replies View Related
