i've plugged my lcd tv to my powerbook using the dvi port and a dvi-to-vga cable and have extended the desktop to the left of my mac's monitor so i can throw windows and stuff there when i'm working (web design). because i would ideally love to have even more room to have my stuff laid out, it would be great if i could connect another monitor and extend the desktop to the right this time... is that do-able? could i use the s-video port for that?
I've got a 15in Titanium Powerbook which I've had for about 4 years and can't see any reason to change it. I'm running OSX 10.3.9, 867Mhz processor, 1MB L3 Cache and 1GB SDRAM. I'd like to get an external monitor, at least 20in, maybe a 23in. I have a few questions though.
1) A fellow mac user said my PB might struggle to power the larger monitor due to the older graphics card. Is this true?
2) If yes... are there any upgrades I can do to allow me to buy an external monitor?
3) If its fine, any recommendations on monitor? I can afford the 23in Apple Cinema, but I don't like spending money for no benefit. How are the other options compared to the Apple? IE Dell/Samsung etc.
4) Anything else I should check/know before purchasing?
5) Any recommended UK sites? If I go Apple I'll go to Regents Street, but what about other options.
Looking to get a pair of M-Audio DX4 monitors for my PowerBook G4 but was wondering if I'll be able to hook them up to it. They say they come with an RCA to mini-jack cable, but does mini-jack mean it'll plug into my headphone port or some special port not available laptops.
I am trying to do a clean install of OSX 10.5 on my old powerbook G4 15". I am using a 10.5 image file on my external. I partitioned the external using GUID, and restored the image file onto the external. (this method works when installing on intel macs). Unfortunately, I cannot boot 10.5 using this method on my powerbook. Is it because i am using a firewire 800 cable? Should I be booting it using a firewire 400? I know that PPC macs cannot boot using usb, so i am stumped.
I have a powerbook 12' 867 mghz, I know I would rather have a new one, but not ready to give up on this old gal yet! Anywhoo I thought the logic board was fried but after letting the powerbook "rest" I came back months later and sometimes it will boot but as soon as I try to do anything it freezes, so maybe the harddrive is fried? How do you get it to ignore the internal drive so it will boot from an external?
I'm after a bus powered 500GB external drive, but I can't seem to find one that runs on 1 USB connector alone.I just had to return a freecom unit as it would only run with the USB data and a seperate USB power lead connected.Does anyone know of somewhere in the UK that does either a firewire or USB 500GB notebook size drive that will run from one lead?
I have a 17" PowerBook G4. I am looking at getting an external desplay. Does anyone know if I can use the display with my powerbook closed? Or do I have to keep my laptop open?
A while back I bought an external hard drive for my PC, but then ditched the PC and decided to hook up the hard drive to my Mac. My External Hard Drive is a: 149.1 GB WDC WD 16 00JB-00GVA0 The problem is, I can access all the information but it will not let me do anything on the external harddrive (Like creating a file, copying and pasting a file on there, etc.) However, I can save Torrent downloads on the harddrive, but they do not show up on the actual external hard drive. But, when I press the "Find/Show directory" button in Bittorrent it does find the files. Is there something I need to do, Or is it just incompatible with my Mac?
I have a 12" Powerbook G4 running 10.3.9 Panther. I am having problem booting my computer from a Firewire HD. I have done a search in the forum but cannot get a definite and/or successul solution. Forum moderators and my respected macrumor fellows, please feel free to direct me to a specific link if you find the questions redundant.Recently, I have had the HD making terrible noise and several days ago, the computer cannot boot at all. When I pushed the power button, the screen shows a folder in the middle with a Mac face and switches to a question mark back and forth. However, it just gets stuck at that stage. I suspected that I have a HD problem and wanted to boot from my clone Firewire HD. Unfortunately, the computer will not boot with Firewire HD either.
to run ppc g4 powerbook from external hard drive with apps from external hd drive intel imac g5? I have a firewire hd but it is not being recognized by the ppc.
irst off, according to mac tracker the Powerbook I have is the Powerbook G4 15 inch FW-800. I am running Mac OS X Leopard 10.5.6
Alright. About one week ago, I hooked up the powerbook to a 19 inch external LCD monitor with a DVI to VGA convertor, and all was well. It found my supported resolution and everything, worked straight away, etc.
Fast forward to today, at about 2pm (4 hours ago) I was using the computer and everything was working fine, but I had left it on for a few days so I shut it off when I was about to take a nap. I wake up from said nap about 20 minutes ago, turn on my Mac and my external display is only showing up at 800x600. I have no idea how this could have happened. This would not be an issue if my monitor's native resolution of 1440x900 were on the massive list of resolutions to chose from, but alas it is not.
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
Just picked up a minty Power Mac G4 Quick Silver and two ADC Studio Displays. I'd like to hookup both displays, but I only see one ADC port. What's my lease expensive dual ADC display option for this machine?
I know you can get the DVI external dongle but I am wondering if you could hook up two external monitors to the MBA. If anyone has tried this please post with pictures or video.
I currently use a Vista desktop with two 22" LCD monitors. Is there any solution out there that will let me use both of these external monitors with a new MBP? Ideal config would have the MBP in the middle with a 22" LCD on each side of the laptop. would like the dock/title bar on the laptop and be able to move windows over to each of the monitors.
I'm on a Macbook Black running 10.5 (soon to be 10.6!), and currently have an external monitor hooked up via a Mini-DVI-to-VGA adapter. I'm trying to figure out an option for getting an second external up and running. (I do pdf-intensive research, and, well, you know how that goes. I'd hook up 25 monitors if I could--but I'm just setting my sights on a third screen for the time being!) I've done my homework with the search function, but the advice has been conflicting--some threads have made it sound like it can't be done; some others have said a product like DualHead2Go works. And a lot of threads are just plain over my head.
I need to ask if anyone knows if i can set up my current imac 24 (about 3 yrs old) with two external monitors. I have a lead which allows me to go out to one monitor but is there any way of splitting that lead into two and having three screens in my studio. It's for Logic as i need the real estate screen space.
I have a G5 with an Nvidia 7800GT graphics card. what are my options if i need to have 3 monitors running at the same time (currently I can only have 2).
Pretty new to Apple products. I'm attempting to use an external monitor that is located above and behind my laptop. However, I can't find a way to set Snow Leopard to let me move the mouse from the primary laptop display upward into the auxiliary display.
Currently, I need to roll the mouse off the right edge of the laptop display to reach the left edge of the external display. Very counterintuitive.
hey guys i am running duals right now i was wondering if it was possible to use 2 external monitors? what would that entail me getting? a dvi splitter?
To all those with external monitors, did you get another webcam? I mean if you use video chat, and want to view the image on the big screen, but your cam is on the macbook... or you're in "clamshell" mode.
I was wondering if it was possible to utilize dual external monitors with the Macbook pro's. With my thinkpad and a port rep I can use dual monitors as long as I keep the lid closed on the laptop. Is this possible with the new macbook's that were released today?
Can you connect two external monitors (1 in portrait and 1 in landscape mode) to new MacBook Pro 15 RD or perhaps a new iMac? Currently using two Dell monitors (27 and 24 in) in Landscape and portrait modes respectively. Looking to get rid of the PC and replace with new MBP RD.
Info: MacBook Pro with Retina display, Mac OS X (10.7.4)
is there seems to be a major bug in the DVI out drivers, so if you connect your new MacBook or MBP to an external Monitor (Apple Cinema or other make) and then your Mac goes to sleep , you cannot 'wake' the external monitor again - either it stays black or worse you get a sort of snowy, out of signal TV look! You need to unplug your monitor, , then when your Mac is awake, re-plug in the external screen. Report this to Apple guys and post anything you know on it here - sooner they send out a patch to fix it the quicker can get back to normal work!
