PowerPC :: DVD Stuck Slot Loading Powerbook Trick?
Oct 9, 2005
I have a 12" PB and latelly became a nightmare with the stuck CDs. Usually it does not want to eject CDs/DVDs from companies but it handles fine virging cds/dvds. ?? Probably there is some formating in the industrial kind of CDs outside, who knows.just want to open this thread for people with the same problem.If the drive tries to eject but can't and end up mounting the CD again. Just take another CD and when you press eject again push that CD into the slot but just one third and you will see the stuck CD coming out with no problem as well.It seems there is a sensor or something that obviously does not work well. I inserted a virgin CD and the drive worked just fine and ejected later on, but a CD as the installer for my Linksys get stuck and some other softwares too.
View 9 Replies
ADVERTISEMENT
Jun 3, 2007
Until yesterday, my iMac G3 slot is working fine, but today, I can't power it up. When I press the power button, the light just flash and then went off. I've opened it up to check the PRAM batt and also checked if there are any shorts on the logic board. All looked ok to me. The HDD is working fine and I supposed the power supply unit is fine too.
View 2 Replies
View Related
Feb 16, 2007
I have a charcoal iMac DV SE 500 which won't complete a proper start. The machine chimes and begins to start, and then clicks off again before anything can show on the screen. It won't start in Target Disk mode, and zapping the PRAM (starting with alt/apple/P/R, right?) has no effect. Does this sound like a dead PRAM battery, a dead 'Power/Analog' board, or a dead hard drive? Can anyone give me an idea of how much it would cost to fix, and recommend good, reliable, cheap UK repairers It's not worth much, but I have a friend who'd love it if it can be restored to life, and I'd like to get some of the files off it if it's not the drive.
View 5 Replies
View Related
Nov 12, 2007
I have a g4 slot loading drive and I am fulling aware the outside casing would be wrong... but that isn't much of an issue, I can replace the panel/casing section with a new panel to take care of that... i just want to know if it is possible as far as hookups etc are concerned.
View 3 Replies
View Related
Apr 23, 2009
On the G5 and Intel iMacs, is there any manual eject (paper clip or other probe) on either of the optical drives, Combo or Superdrive?
View 3 Replies
View Related
Sep 25, 2008
Ok I have a powerbook G4 titanium model.
Would the 1 GHZ model with Tiger and 1 GB of RAM run a 480P Hulu movie onto a 20" ACD old model full screen if I let the movie load for a whole day or so?
View 4 Replies
View Related
Mar 20, 2007
What solutions can be offered for iBook loading problem? It's stuck and I've some data I need to back up?
View 2 Replies
View Related
Sep 28, 2007
I software updated my iMac g5 (powerPC 1.6 OR 1.9GHz), with the mac OSX updated(170mb), and it never fully completed the download, said it had problems with the package. So I restarted it, and now its just stuck on the blue screen with the grey box (where it loads the IP extension, etc).
View 8 Replies
View Related
Jan 26, 2008
I have a 17" PB, 1.33 ghz with 1.76gb ram. In September it gave signs of the hard drive failing. It would crash right after booting and then not boot at all.If I booted into target disk mode i could still access the files. I backed everything up and did many versions of trying to reformat / reinstall my OS to no avail. When Leopard came out I went through the process again to see if that might help but it didn't. Today I replaced the HD and now it still won't boot at all. It goes to the grey apple screen with the rotating loading icon and stalls. I've let it sit there for 10 minutes or more.
View 11 Replies
View Related
Aug 16, 2010
I saw there is a way to trick Leopard into seeing 867MHz, is there something similar to trick the installer into seeing 512MB of RAM?I know <1GB is not recommended for Leopard, but try to find cheap 512MB PC133 low-density these days, I'm still trying, but I want to install Leopard.I know that one could modify OSInstall.mpkg, but I rather want to do this another way if possible.
View 6 Replies
View Related
Dec 11, 2010
Hey guys, i got an old Powerbook that the whole family use to surf the net. I notice its been super slow lately. Ive never had a problem with this notebook, I've only done 2 reinstall in the time ive owned it. I recentluy did another one, and notice its still slow, loading websites is slow, cant watch movies on it. This is a notebook i use to do photoshop and illustrator work on.
Do you think its just its time? I think it could be the hard drive or memory, is there any type of diagnostic i can do to find out what the problem is?
View 7 Replies
View Related
Dec 28, 2009
I am new to mac. When I insert a cd/dvd into the slot loading drive, I have to push the cd in rather far before it actually catches it and pulls it in. Is this normal or is it supposed to only be pushed in about half way. When it ejects it seems that it pushes the disc out much further. Is there something you must do before inserting a cd, or do you just push it in?
View 6 Replies
View Related
May 20, 2009
This is not related to the other bluray thread on here. I am looking for a slot loading Blu Ray drive (I do not want write capability) for my iMac Aluminum. I know fastmac sell a Bluray drive for $999, but that has the unnecessary write capability which jacks up the price. So, does anyone know where to get a slot loading BD-ROM for the iMac?
View 11 Replies
View Related
Feb 27, 2008
Is it possible to replace/upgrade the Drive on the MacBook?
View 3 Replies
View Related
Mar 29, 2010
Do they exist yet? The prices for laptop BD drives in general are lower than I expected but any slot-loaders available are about 12mm high, which means 17" MBP owners are in luck. [URL] It's strange that this one is available though, yet encouraging. If they can build a 9mm drive that uses a tray then surely a slot format would be easier?
View 2 Replies
View Related
Aug 11, 2009
The screen/crt of the imac that I have been using since about '98 went black - this actually happened a couple times previously but I was able to get back in (no idea - one of those things where out of frustration you just start pushing everything at once and it suddenly pops back on). I have tried everything - the internal battery, that little button on the motherboard (not sure if that is what it is called) that resets everything, the connection of the main power button on the front, etc. I am fairly sure it is stuck in sleep-mode or something (no beeps, hard drive doesn't make the usual booting-up sounds but you can tell that it is receiving power) but after months of wasted effort I finally gave up. I bought another slot-loading G3 and would like to swap hard-drives between the two - I have taken my old G3 completely apart so many times that I am totally comfortable with that aspect but have hesitated because if I somehow blow this one I will be left with nothing.
View 7 Replies
View Related
Jun 24, 2009
My friend was thinking of getting a new iMac, the only thing he does not like about them is the slot loading drive. He burns around 5 cd's/DVD's a day, a stack of 100 cd's does not last long with him. He does a lot of movie burning to watch it on his tv and wonders if after a year of tons of burning will the slot loading drive die out. He does not want to buy an external DVD burner as well which is what i use.
View 2 Replies
View Related
Nov 5, 2009
I was just wondering, how come we rarely see slot loading drives in notebooks and desktop computers other than Apple Products?
What are some of the benefits and disadvantages of slot loading drives?
Do you think that they have anything to do with the Blu-Ray negotiations?
They are definitely a lot nicer to use/look at compared to those hideous PC tray drives.
View 1 Replies
View Related
Dec 5, 2008
I have an imac g3 slot loading that came with a CD in it. It sounds pretty bad when trying to eject and finally a bit came out and I could grab it. Is there a way to investigate or repair or replace?
View 2 Replies
View Related
May 5, 2010
Just seen that the new hp envy line of notebook have been annouced HP have done a good job copying the MBP line even more now with slot loading blurays and glowing logos on the back!And they cramed in a radeon 5830 and 3g into them!And the 14" is an i5!
View 24 Replies
View Related
Apr 6, 2012
i can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
View 14 Replies
View Related
Jun 3, 2012
When I plug it in, the computer makes a horrrible noise, and then when I press the power button, it flashes, and the noise becomes much louder. It origionally turned on to the hd selection screen when I first got it, and I accidentally left it on all day. When I got home, it was making the noise. I know it is not the hard drive, because it dieson't have one, and Imacs don't have fans.
Info:
iMac, Other OS, Broken, No HD
View 4 Replies
View Related
Dec 14, 2009
Well first off let me say I was pretty intoxicated and not thinking straight. I took out my sd card out of my camera, and while looking dead on at my screen i reached over to the side and pushed my sd card all the way though.
After realizing what I did i proceded to panic, yell, curse, and punch myself in the forhead. I called my buddy who works at an Apple retail store and told me that if I brought it in and they had to open it up I would be charged for the part and labor (around$200+).
I again proceded to cuss and punch myself till he suggested I hold the 27'' beheameth sideways and jump up and down. Once I heard it drop i knew I had a solid chance of geting it out. Since there's the dust flaps in the superdrive slot it wouldn't just come out by shaking. I literally had to hold it sideways on my knee and take a hairclip in order to get it out.
View 24 Replies
View Related
Nov 15, 2006
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies
View Related
Jun 2, 2012
My imac G5 is stuck on the loading page. It won't load and I don't know what to do.
Info:
iMac, Other OS, iMac G5
View 1 Replies
View Related
Sep 7, 2014
FCPX 10.1.2 gets stuck while loading a project: the status bar on top of the window saying "Loading xxx project" shows the task is completed with a full blue bar but nothing happens and the panel doesn't go away. Only a few commands are available (not greyed out) in the menus; the Quit Final Cut Pro is available but I get a beep and nothing happens when I select this command. Only way to exit is to Force quit (opt-cmd-esc).
The strange thing is that I did not try to open that xxx project in the timeline. I was just trying to copy a range from a compound clip in the timeline into another compound clip already open in (another level of) timeline: just after selecting the range (R) FCP X decided to load project xxx and it got stuck.
Another weird thing is that while the Loading panel was visible and I had no control on FCPX, FCPX started to render the compound clip in the timeline. So I waited hoping that at its end (not the usual behavior... but ok) I could continue working. No way: rendering finishes, but the Loading panel is still there.
Info:
iMac, OS X Mavericks (10.9.4), FCP X - Canon HF M56 PAL
View 6 Replies
View Related
Jun 5, 2014
My slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
View 1 Replies
View Related
Jan 23, 2009
The computer is stuck on the apple screen with the spinning wheel. I can manage to boot up in safe mode but that is it. This arose from an apple security software download recently and when the machine went to reboot it could not. Now on a normal boot up it just sits on the grey screen with the spinning wheel for hours (if let). I have booted up in safe mode and removed anything from the Accounts that was other than the iTunes helper - rebooted - nothing
I have attempted an SMC and PRAM - again on reboot - nothing. I have also started in option mode but there are only two symbols that I can use one is a circular arrow, which does nothing when clicked and the other is a right pointing arrow that appears to attempt to launch OS X, to no avail. I have also tried the option of rebooting with the install disk in the drive and holding down the C key - again nothing.
View 2 Replies
View Related
Mar 8, 2012
My 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can i fix this?
Info:
iPhone 3GS, iOS 5
View 4 Replies
View Related
Apr 29, 2012
Computer is stuck on the loading screen.
Info:
iMac (20-inch Early 2008)
View 1 Replies
View Related
