PowerPC :: Is Over-clocking A 700mhz G3 Possible

Feb 12, 2009

I recently managed to pick up a Imac G3 Graphite, 700mhz, 1GB ram, 60GB HD, OSX 10.4.11 for free (Well kinda free, im repairing 2 emacs and a powermac g4) it runs pretty well for me (starts lagging with firefox/itunes/msn/transmission| running at the same time ) im one of these people who HAVE to multitask computers :L i know its old and i probebly shouldn't push it this hard but.

well anyway iv been reading up and seen posts that you can over-clock other g3's (re-soldering the jumpers for the CPU clock controllers) and i was wondering if i could do the same for this one. I've had a little look around the internet and haven't found anything.

View 9 Replies


ADVERTISEMENT

PowerPC :: Logic Board On A Ibook G3 700Mhz

Apr 6, 2007

Can you put a 800Mhz g3 logic board in 700Mhz g3? I read somewhere that I will have grounding issues. Is that true? Has anyone done this? My ibook has been sitting here unused for the last 4 months and I would like to see if I could get it working. (The video chip has died and I have tried to get it back)

View 5 Replies View Related

PowerPC :: 700mhz Usable For Streaming Itunes?

Jun 2, 2010

basically I am looking to use an original eMac 700mhz with 768MB RAM in my living room to stream itunes from our other computers. Only reason i am even considering it is because eMacs are way cheap on eBay, less than an airport express for use with airtunes, plus i could check email etc on it.

View 11 Replies View Related

PowerPC :: Possible To Replace The Logic Board In A 12in 700mhz G3 Ibook

Jan 7, 2008

Is it possible to replace the logic board in a 12in 700mhz g3 ibook with a g4 12in logic board? I was just wondering because I came across a g4 logic board.

View 2 Replies View Related

PowerPC :: Identifying IBook G/3 700MHz White 12in Display?

Jun 1, 2008

I'm trying to get an accurate identification of the iBook white G/3 700 MHz with 12in display we just acquired. There seems to be a couple of very similar models. The Apple Support article is unclear [URL]as to which one we have. One model is an early 2002 release (M8602LL/A), the other a late 2002 release (M8860LL/A).

View 2 Replies View Related

MacBook Air :: Just Keeps Clocking And Won't Load?

Dec 6, 2014

My mac just keeps clocking and won't load

View 1 Replies View Related

IMac :: G4 700Mhz - Install Tiger Or Leopard?

Jun 5, 2010

I know this concerns an older machine, but I was hoping to get some solid advice on this subject. I have retail copies of both Tiger and Leopard for my G4, and my OWC order just came in the mail, and after tearing it down, cleaning it up, and throwing a new 160Gb drive and 1Gb of memory into it, the machine is feeling extremely responsive under Tiger. My question is thus: everyone seems to think Tiger's days are numbered, which I can understand when you consider it's age. But how numbered are numbered? Safari and iTunes are still supported up to the current versions, Camino is still supported on 10.4 so when Firefox drops Tiger support I'm not without a Gecko based browser, and the other software I plan to use on this machine (iLife 06, OpenOffice, JDarkRoom and some old games, primarily) are all still good for Tiger.

My primary concern stems from the web browser issue, but more importantly, internet security on this machine. It's on a wired connection behind an AirPort Extreme so I don't know how worried I need to be, but last I checked security updates are not coming down for Tiger anymore from Apple, thus would the iMac become a potential target running Tiger? I don't want to be running bare arsed to the wind, if you'll pardon the expression. So I was hoping someone with a better understanding of software security could explain differences between Tiger and Leopard and wether or not that's a huge deal. I'm tempted to stick with Tiger, because now that the upgrades are in, it's lightning fast. Almost as fast as the MacBook fast, which is impressive from an eight year old machine.

View 7 Replies View Related

Hardware :: Ibook G3 700Mhz Does Not Start (power On)

Oct 28, 2005

Three days ago, I stored my ibook in my bag, but I forget to take it out. (normally it is sitting on desk recharging)

The ibook itself was in sleep mode (by simply closing the lid). The battery indicator was 1/2 full.

Today I tried to continue working with it. Opened the lid, but the ibook didn't turned itself on. The sleep led wasn't pulsating either. I just thought that it might run out of juice. First I pressed the Power button. Nothing happened.

I plugged it in the power adaptor and then pressed the power button. Nothing happened. I tried holding the Powerbutton in order to force a reset. Nothing happens.

I unplugged the ibook from the power adaptor, and tried to reseat the battery. Opened the lock, pulled it out, pushed it back in, closed the lock)Pushing and/or holding the power button did nothing.

I tried starting the ibook without the battery (does this even work?), while only the power adaptor is plugged in. Pushing and holding the power button did nothing.

To sum it up: It doesn't start with and without the battery nor with the power adaptor.

The strange thing is that the battery is charging. (the light on the power adaptor plug is oragne) Three of the four battery leds on the underside are "on" while I am writing this post. Resetting the power manager (ctrl + option + shift + power) didn't do anything.

View 6 Replies View Related

PowerPC :: Unusually High Fan Revving / Dual 1.8 GHz PowerPC G5

Dec 21, 2006

I have a Dual 1.8 GHz PowerPC G5 with 2.5 GB of RAM. My fan starts revving really loud when I am using multiple apps (Adobe CS2, Firefox, iTunes) and while watching a video tutorial or AVI movie (both saved on my desktop). It also happens when I am just watching a AVI movie with no other apps open.

I just added one GB of RAM yesterday thinking maybe this will solve the problem since I am running multiple apps. This did not resolve it. So I searched the messageboard for threads on fan issues similar to mine. I read it may be caused by the tempature in my room. I keep the tower on my floor on top of 2 pieces of wood about a 1/2 inch thick. I live in a small brick studio apartment so the tempature is usaully between 60 to 70 degrees.

I looked into smcfancontrol but it looks like its for laptops only.I also do not have a utilities program for my computer yet. I was wondering what was the best program out there to clean up/tune-up my hard drive so its running at maxium speed.Has anyone had experince with this issue and have any answers? I am concerned this may be very detrimental to my computer in the long run.

View 4 Replies View Related

PowerPC :: LaCie LaCinema For Vintage G4 PowerPC Mac?

Oct 1, 2010

I'd like to buy a LaCinema Classic Multimedia Player 500GB for my G4 400MHz (sawtooth).

[URL]In LaCie website says that a system requirement for LaCinema is a 500MHz processor or greater...

Do you believe that it will work in my 400Mhz PowerPC?

View 2 Replies View Related

PowerPC :: Dual 1.25 GHz PowerPC G4 - Upgrade Compatibility?

Oct 20, 2008

I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:

Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)

I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?

This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.

View 2 Replies View Related

PowerPC :: 4 Gb RAM With G5s

Dec 15, 2006

I've heard that G5s (especially dual-core/processor) really fly with 4 Gb RAM. Does anyone have one with this much RAM? If so, is it really worth the upgrade? I have dual-core G5 with 3.5 Gb RAM. It's great, but I do think it feels a bit choked at times. I would like to give it another Gig.

View 24 Replies View Related

OS X :: Vuse For Mac PowerPC Or Not?

Feb 24, 2010

I run a Mac G5 PowerPC, OS X 10.4.11.

I see here that it says it's compatible with the 4.3 version of Vuse (PowerPC and OS version), but on their website, is says "for Intel". I would really like to know what is right here. Does it also support PowerPC or not? . What version of Vuse should I use, with satisfaction, if any? My computer has been acting up and I am trying to figure out why. That might be a cause. I would be very grateful for such information, to keep my mac in good shape and also enjoy Vuse.

And if Vuse isn't the answer for my mac, what would be ?

View 2 Replies View Related

PowerPC :: Way To Run On ITunes 10 With Mac OS X 10.4?

Sep 2, 2010

Powerbook G4 running on Mac OS X 10.4 but iTunes 10 suitable for new iPods and as PowerBook G4 quite slow running on Leopard so I am using on Mac OS X 10.4.

View 4 Replies View Related

PowerPC :: PPC G4/upgrade From 10.4.11 To 10.5

Dec 15, 2010

I have a few questions about upgrading my mac in order to use the new iPod touch 4th gen (requires 10.5 or later).

First, here's what I'm working with:
I have a PPC G4, dual processor 1.25 GHZ, 80GB HD, 768mb RAM, running Tiger 10.4.11. I use CS2 for freelance graphic design (and very occasionally Quark 4 on OS 9). I have 2 external hard drives backing up my system, storing personal files, photos, music, etc. Yes, I've got an oldie, but it's been cranking out loyally over the years with tune ups and TLC, and I need it to live on a while longer.

1. Can I upgrade to Leopard 10.5 (not snow leopard) and still use my CS2 programs? From what little information I've been able to find, the answer is most likely yes, but with quirks and decreased speed... which I can deal with. I simply cannot afford a new mac (nor the software upgrades required once that happens), so I need to work with what I've got.

If the answer is yes, then...
2) are there any other updates in between 10.4.11 and 10.5 that I will have to purchase before upgrading to 10.5?

3) Also, since I will have to upgrade to a minimum 1GB RAM, can anyone please suggest a good site to buy it from? There seems to be a million options out there. I know that I should really have more RAM anyhow with what software I am using.

View 5 Replies View Related

PowerPC :: Cannot Install OS 10.5 On Mac G5

Jan 6, 2011

I have a power mac g5 its a few years old and I'm having trouble installing OS 10.5 leopard. When I turn on the computer i get a blinking ? folder that alternates showing a ? and a mac face, with a gray background. I tried putting in the start up disk (? folder doesn't appear with the start up disk) and it guides me through the installation steps, but it doesn't display a location to install the OS on. I also tried putting an external HD in and this does not appear as well. So, I went to disk utility and tried the figure out the problem. In disk utility, the internal hard drive is there, but not the external HD. I also tried switching Hard drive ports from a to b and this made no difference.

View 11 Replies View Related

PowerPC :: How To Put HDs On 1.33ghz?

Aug 7, 2006

Does anyone have any experience with putting new hard drives in a 1.33ghz iBook 12" and in a 12" PB 1.5ghz -- that both have the sensor motion thing on the hard drives?

Is this motion sensor a physical part on the hard drive or something within the connection itself?

I also want to put a superdrive in the iBook 1.33ghz.

If anyone has any tips or advice, would be welcomed... as I believe the iFixit site's photos are for earlier revision machines.

View 1 Replies View Related

PowerPC :: Ram For G5 1.8ghz?

Oct 19, 2006

I just put 2 sticks of 512mb in my g5 with these specs pc3200r-30330, the machine doesn't recognize them. I notice that the existing ram got this on the label pc3200u-30330. Pease someone tell me the difference between these 2.

View 3 Replies View Related

PowerPC :: Put ANY DVD Burner In G5

Nov 22, 2006

My G5 power mac has a standard CD burner in it that came with it when I got it - its given up the ghost. So I am going to replace it with a DVD Burner. Would I be right in thinking I can throw any DVD Burner in there? If i get the latest Pioneer Tray loading burner, that would slot right in there no problems right?

View 5 Replies View Related

PowerPC :: New HD And RAM For Powerbook?

Nov 22, 2006

I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:

1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.

I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.

View 3 Replies View Related

PowerPC :: G5 Won't Come Out Of Sleep?

Dec 5, 2006

yesterday evening we had a power outage at my house, My G5 power mac was in sleep mode when the power went out. When the power came back on my mac came back on as if it were sleeping. The LED light in the front will stay on but the comp is non responsive. I 've tried holding the power button down for longer than 2 mins and nothing, I've tried unplugging everycord from the power mac and leaving it unplugged all night then this morning plugging everything back in and it still is non responsive, with the LED light still on. I am not hearing any nosie's coming from the power mac. I read on the apple website that it could be the PMU or SMU But I purchased the power mac late 2004 and as from what I read the only way to reset the PMU is to turn off the mac then unplug the mac and leave it unplugged for 2 mins then plugging it back in, If that were the case then leaving it unglugged all night should have reset it. I'm not sure yet as to if the power mac G5 has the SMU reset button or not because I'm at work.

View 4 Replies View Related

PowerPC :: Won't Use 16X DVD Burner In A G4

Feb 6, 2007

Can you burn disks at 16X on a G4. I have a MDD and I'm not sure how fast the optical drive bus is but I could swear its an ATA-3 bus, which I think is either 16MBps or 33MBps. Not quite sure. Does anyone have one and can vauch the full 16 speed while burning.

View 17 Replies View Related

PowerPC :: Is The Ram On The E-mac Upgradeable?

Feb 12, 2007

Is the ram on the e-mac upgradeable? I would like to put more ram into my mom's e-mac, I think 128MB is a bit low...

Also, what is a good price for ram? (probably two 512s)

View 6 Replies View Related

PowerPC :: Run Photoshop CS2 And CS3

Feb 12, 2007

I own a PowerBook G4 15-inch, been enjoying it for a long while now, having thoughts of upgrading it. Performance Question, Is the current Black MacBook (when the top of the range Intel processor is installed, and when maxxed out with RAM) faster in overall performance than my now aged PowerBook G4 15-inch? I saw a bloke take out his MacBook at a cafe recently and I was blown away by its compact size (weight is an issue and I'm prepared to compromise large screen size for smaller resolutions and less weight). Schlepping my Powerbook around in my large and well protected shoulder bag is quite literally giving me a pain in the neck. Software Question: Will I be able to run Photoshop CS2 and CS3 and Final Cut Express on the MacBook without wishing I'd upgraded to the 17-inch MacBook Pro - weight issues and compact form aside - instead ? currently I uninstalled CS1 from my Powerbook G4 800Mhz 2GB Ram because its performance sucked soo much, I ran back to Photoshop 7 and ImageReady 7.

View 3 Replies View Related

PowerPC :: How To Figure Out My G4?

Feb 14, 2007

So I got a great deal on a G4 powermac 733 mhz dig audio a few years back and it has served me well, but i bought it with one known flaw: after you start up, eventually It locks up and you get the screen that says you need to restart your computer. After I restart, I have never had it freeze, so I simply restart everytime and it works great. I have done a clean install of osx but that didn't solve the problem. Wierd a? I'd love to get it fixed if i could.

View 10 Replies View Related

PowerPC :: Upgrading A B&W G3?

Feb 17, 2007

I have just come across a Power Mac B&W with a 300MHZ processor. Someone gave me a G4 400MHZ CPU. I was wondering if I can put the g4 in the B&W

View 15 Replies View Related

PowerPC :: How To Run Ubuntu On G3

Feb 18, 2007

I'd like to try running Ubuntu (6.06) on my G3 400 IMac. Is there a tutorial on how to do this? At least how do I get to boot mode? I'm running OSX.

View 11 Replies View Related

PowerPC :: Can I Overclock My G3

Feb 24, 2007

Is there any way I can overclock my b&w g3 350mhz?

View 8 Replies View Related

PowerPC :: Need More RAM For EMac

Mar 6, 2007

I need more ram for my eMac 1ghz. It has 512mb and its a little slow during some things. Like IMovie. What type of ram do I need?

View 3 Replies View Related

PowerPC :: Is Powerbook G4 802.11g Or B

Mar 14, 2007

So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?

If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved