PowerPC :: G4 MDD Dual 1 GHz - Start Up Disk?
Dec 13, 2007
I recently lost my G4 MDD 1.25 GHz tower to a power surge. I've replaced it with a G4 MDD dual 1 GHz. This is a dual boot machine. When booted up in 10.4.11 I can select the 9.2.2 disk but it will restart on 10.4.11 - Selecting Target Mode, it will boot on 10.4.11. The only way to boot 9.2.2 is with an Option start. When in 9.2.2 and using the Start up Disk control panel and choosing 9.2.2 - it boots up from the 10.4.11 disk. Additionally, when a Tiger DVD is inserted and the Install and Restart are clicked - it boots up the 10.4.11 disk.
I installed 10.4.11 and 9.2.2 on two partitions of another hard drive - same results. I Reset-all in Open Firmware. Pressed the PMU reset. I'm out of ideas.
I really hope I'm not the only one to experience this.
View 13 Replies
ADVERTISEMENT
May 24, 2009
I'm running 10.5.7 and Boot camp - is there any way to force my Mac to always ask which disk to start up without always having to hold the option key?
View 1 Replies
View Related
Apr 5, 2009
Is there any way I can boot up my external hard drive as a start up disk along with my internal hard drive?
View 3 Replies
View Related
Jul 9, 2008
I had the spinning beach ball today, nothing would force quit, so I shut down with the power button. When I tried to start up again, it got as far as the gray apple, but nothing else. I started up from the Tiger CD, tried to install and it got stuck at Destination Disk. I made it to disk utility, tried to verify or repair, then got this error:
Verifying volume "diskOs9"
Checking HFS Plus Volume
Invalid node structure
Invalid node structure
Catalog file entry not found for extent
The volume needs to be repaired.
Error: The underlying task reported failure on exit.
1 HFS volume checked
Volume needs repair.
Then a popup window: First Aid failed, Disk Utility stopped verifying "diskOs9" because the following error was encountered: The underlying task reported failure on exit. I am stuck. How do I proceed?
View 5 Replies
View Related
Nov 23, 2008
I've got an early '08 MacBook and an iBook G4. The iBook will only work for a few minutes before freezing completely.
I want to use my MB to get info off the iBook, but when I follow the instructions to start the iBook in Taget Disk mode, the MacBook asks if I want to 'initialise' the harddrive. What's that about?
How can I get the data off my iBook (ideally without re-installing the OS)?
View 3 Replies
View Related
Jan 26, 2007
My G4 powerbook has been saying recently that the start up disk is full, so i tried to empty some stuff off it. But not long after this when i tried booting it up the normal happens at first ie the t'ing' start up sound and the apple sign with the little timer going round but it does nothing else, it just carries on going round. I have tried re setting it and looked on help sites like this to try and override it etc but nothing seems to work!
View 4 Replies
View Related
Nov 27, 2010
I am looking for a tear down guide for my 4 core power mac. I need some instructions on how to remove the CPU's since I bought this for $100 and found the part for $250.
View 2 Replies
View Related
Nov 24, 2009
I like eMacs but the G5 looks sooo nice. I know I probably won't be able to use any for very long but whatever. What is the best?
View 24 Replies
View Related
Apr 10, 2012
My iMac does not start up as usual. I now get a ' start up disk is full. You need to make space available on your start up disk by deleting files' message. I am able to key my log on password however I just get the purple galaxy screen with no desktop.
If I try to use the keyboard I get a tone when pressing the keys.
Has worked perfectly well up until I got this dusk full message.
View 2 Replies
View Related
Dec 21, 2006
I have a Dual 1.8 GHz PowerPC G5 with 2.5 GB of RAM. My fan starts revving really loud when I am using multiple apps (Adobe CS2, Firefox, iTunes) and while watching a video tutorial or AVI movie (both saved on my desktop). It also happens when I am just watching a AVI movie with no other apps open.
I just added one GB of RAM yesterday thinking maybe this will solve the problem since I am running multiple apps. This did not resolve it. So I searched the messageboard for threads on fan issues similar to mine. I read it may be caused by the tempature in my room. I keep the tower on my floor on top of 2 pieces of wood about a 1/2 inch thick. I live in a small brick studio apartment so the tempature is usaully between 60 to 70 degrees.
I looked into smcfancontrol but it looks like its for laptops only.I also do not have a utilities program for my computer yet. I was wondering what was the best program out there to clean up/tune-up my hard drive so its running at maxium speed.Has anyone had experince with this issue and have any answers? I am concerned this may be very detrimental to my computer in the long run.
View 4 Replies
View Related
Apr 11, 2012
I just bought a Dual 1,25 Powermac. Included were the original restore discs. I've installed the OS 9 package, but when I try to boot from OS 9, I get the flashing question mark on startup.
Info:
PowerMac, Mac OS 9.2.x, Dual 1.25 with Firewire 400
View 14 Replies
View Related
Sep 5, 2014
My start up disk is my hard drive.
Whenever I take the hard drive out my laptop just stops working and it's back to normal when I put the hard drive in, is there a way for me to use my laptop without having to physically have my start up disk (hard drive) plugged into my laptop?
View 2 Replies
View Related
Aug 29, 2014
I have a Macbook Pro . The hard disk failed smart disk and my laptop does not start any more. Is it ok if I replace the HDD with CGET or WD hard disk rather than the apple hard disk. the pros and cons of a non apple HDD.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 1 Replies
View Related
Oct 20, 2008
I curently have 10.3.9 with a PowerPC G4 dual w/ 1.25 processors and 2 gig of ram. I want the highest upgrade I can get that will be compatibe with my software which is:
Quark 6.5
Acrobat 7.1
Acrobat Distiller 7.0
Illustrator CS1
Photoshop CS1
Microsoft Office (don't know what version but I've had it for years)
I really can't afford to go buy all the software again and I don't want my system to crash. Any suggestions?
This upgrade is mostly spawned due to the recent purchase of a new iPod Nano... Not supported by my current OS! Man, I didn't read the requirements, shame on me. However, the dang thing will work on my kid's PC w/ XP Pro. I only got the Nano cause it's mac - he wanted the Zune that ONLY works w/ PC.
View 2 Replies
View Related
Oct 6, 2007
with my G5 I need to get a new hard drive since the old one died. to format the new hard drive do I need a start up disk or a recovery disk.
Information:
PowerMac G5
Mac OS X (10.4.10)
Dual Core 2.0 2x 256 Ram
View 2 Replies
View Related
May 1, 2009
I recently got a new hard drive and I want to install Mac OS X 10.5 and Windows XP on it.
Is it possible to format one partition with the Mac GUID for OS X and the other partition as a Master Record for Windows XP?
Or does Mac OS X/Windows XP dual-booting has to be done through the bootcamp?
View 4 Replies
View Related
Jun 10, 2012
I have a new iMac with two disks- the SSD and the 1TB hard drive. Lion was loaded onto the SSD, so that's my start up drive. I need to migrate all the data from my old iMac (also has Lion) to the new one. When I run Migration Assistant, it thinks I want the old mac migrated , which of course, doesn't have enough space for all the data. I can't find any way to tell it to migrate to the 1TB hard drive.
Info:
iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
Jun 18, 2007
Looking to buy a used G5. Dude said he upgraded a G5 1.8 to a Dual 2.0... Is that even possible and if so what limitations or problems could the machine have. Said he replaced the whole motherboard.
View 7 Replies
View Related
Jun 25, 2007
I'm finally upgrading my iBook, but I'm slightly confused on which type of RAM to buy. According to my System profiler, I would need SO-DIMM SDRAM type with PC133 speed. I can find the SO-DIMM SDRAM, but the speeds are not matching (PC2700 and PC5300).
View 1 Replies
View Related
Apr 20, 2010
i changed the power supply on my G5 dual 2.5 ppc 6 months before, (G5 was completly silent when switching on, no click sound of power supply)
i have again problem with this G5.... but this time when i swith it on, you can hear one click like in audio amplifiers, and the front diode flash one time only, and then nothing! no fan noise, nothing, silence...
who can tell me if it's again power supply problem? battery? or mother board? or what it can be?
View 6 Replies
View Related
Sep 8, 2006
So i put the OSX disk in (10.3) and when i make it boot from the disk the mac logo pops up then it shifts a quarter inch to the right and freezes. I then tried booting it normally and pressed the install button now it boots off the CD automatically with the same result and can't be turned off. Is there an emergency disk remove thing for a powerbook G4? And is there a way to reformat my computer without the disk?
View 1 Replies
View Related
Jun 28, 2010
I have been trying to burn a .cdr file to a dual layer dvd using Disk Utility. I got it to work once, but I tried four times. I think that it must be very sensitive or something, because I can't figure out any other factor that affects it.
Has anybody else run into this problem, and if so, what's your solution? I think it may have to do with vibrations of the disk drive or something, but I would be lying if I said I knew that for sure...
View 8 Replies
View Related
Apr 23, 2009
I am trying to copy a DVDR recorded on a friend's DVD recorder. The disc is a single layer 4.7Gb TDK DVD+R and I'm using Toast Titanium. The problem is that my computer thinks the DVD+R is a dual layer disc. I say the computer rather than Toast because if I open the disc and copy the VIDEO_TS folder to the hard drive it takes up more than 10Gb, which is impressive since the disc it is copied from only has a 4Gb capacity! I have googled this but failed to find a solution.
View 3 Replies
View Related
Sep 10, 2010
Just picked up a minty Power Mac G4 Quick Silver and two ADC Studio Displays. I'd like to hookup both displays, but I only see one ADC port. What's my lease expensive dual ADC display option for this machine?
View 5 Replies
View Related
Dec 29, 2010
I've been a mac guy since 1990 and for the last five years have settled into a nice PowerMac G5 with the dual 2.0 processors with the 20" Apple Cinema Display.
I did search on this but couldn't find anything specific, but I am considering adding a second 23" Apple Cinema Display to my set-up for a dual monitor workstation.
I have the ATI Radeon 9600 video card with two DVI ports. I have my 20" plugged in to port 1 and it's running at 1680x1050 resolution (the highest). When I add the second monitor, will BOTH monitors be able to run at their highest resolutions? Or do I need to add another video card?
I had heard rumor that resolutions are a trade-off: if your card is split between two monitors, then the resolution splits, true?
If I can run both at the highest res, then I'll pull the trigger and get the extra monitor. I'm assuming there's someone here who has done the exact same thing?
View 2 Replies
View Related
Jan 1, 2011
G4 won't boot. No startup chime. Power button light goes off right after I power it on. Fans go on and soon switch to high / fast mode.
Tried everything imaginable -- removing all cards, RAM swapping, PMU reset, bought a new 3.6v PMU battery... everything on this forum (I think) except buying a new power supply which I'm trying to avoid.
View 1 Replies
View Related
Aug 16, 2006
I listed my Dual 2GHz G5 on ebay and hope to sell it. In the event I can't, would it make a good server if I throw Mac OS X Server on it? Would a server be of any benefit since my network consists of my Mac Pro, Mac Book,a nd Xbox 360?
View 5 Replies
View Related
Nov 11, 2006
I did a thread search and could find lots of instances of an ibook not seeing or using the battery, but I seem to have the opposite problem. I have an ibook g3 700mhz (dual usb). It will only boot and run off the battery. It will not boot or run if it is only plugged in (dead battery or no battery = no running or booting). When plugged into a 45W white charger (that works on other ibooks of the same ilk), it will be green without battery and orange when the battery is in. It will not charge a battery. I've tried:
two other dc-in boards and cables known to work in other ibooks
two different batteries (that charge in another machine)
PMU reset (the light on the charger changes to green for 3 seconds, seemingly indicating the reset was done correctly)
for fun I put in a hard drive that worked in another machine and added ram that works in another machine all to no avail. What the heck is going on?
View 1 Replies
View Related
Nov 18, 2006
I've got a PowerMac G5 dual-core 2GHz box. Can I add another dual core CPU to get a quad-CPU system?
Forgive me for not wanting to open the case and look for myself, but it lives in a little hole that is hard to get out of b/c of all the cables and stuff... just wondering if anyone knows off the top of their head if the motherboard has another slot...
View 1 Replies
View Related
Dec 22, 2006
I would like to use the machine to do powerpoints at our church. I want to use the internal monitor and an external monitor (projector) to do the powerpoints. I want it to work like the my iBook with the screen spanning hack installed.
if not then i will probably end up using a g3 desktop instead.
View 7 Replies
View Related
